Leo Log

Sat, May 18, 2013

Working on quick connect tool mount for HydraFabber. *Please coordinate between John Log, Leo Log, Tim Log, and Nate Log - all work related to HydraFabber.

Sat, June 29, 2013

Found parts for the Spindle drawing from MIT

• 20K RPM Motor

• Nylon Spacer, 0.25"ODx2.3mmID

• Flexible Coupler, 0.25" ID

• Flexible Spider

• Shim Washer, 0.255"ID x 0.005"T

• Ball Bearing, 0.5"ODx0.25"ID Flanged

• Bronze Bushing, 0.625"ODx0.5"IDx1.5"L

• Shaft, 0.2497"ODx2.125"L

• Shaft Coupler, 0.125" Bore

Sat, July 6, 2013

Building the spindle mount.

• OD of flexible spider: 5/8"
• OD of bushing: 5/8"
• OD of rigid coupler: 1/2"