CNC Torch Table v17.08
Jump to navigation
Jump to search
- 1"_Universal_Axis deprecated
Version 3 Working Doc
Parts Library / CAD
Master
- Error creating thumbnail: File missing
Modules / Individual Parts
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
File:CNC Torch 1708 Motor interface.fcstd
. STL for printing - File:CNC Torch 1708 motorside.stl
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
File:CNC Torch 1in carriage module.fcstd For X Axes
- Error creating thumbnail: File missing
- Bolts.png
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
Frame
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- CNC Torch 1708 Table.png
Rail System
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
Torch
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
Deprecated
See version history - version of October 9, 2017 and earlier - with the double length metal plates. These are not used to allow for adjustability of X axis spacing by using 2 single carriages.
Electronics
Various Pictures
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
====Pins from TB6600 to arduino mega for X axis:
- All 3 negatives (ENA-, DIR-, PUL-) from TB6000, bridged and connected to GRN on Arduino
- ENA+ connected to Pin38
- DIR+ to A1
- PUL+ to A0
====Pins from TB6600 to arduino mega for Y axis:
- All 3 negatives (ENA-, DIR-, PUL-) from TB6000, bridged and connected to GRN on Arduino
- ENA+ connected to PinA2
- DIR+ to A7
- PUL+ to A6