Simple 3D Printer Extruder
Hint: This is a simple and basic low cost extruder for 1.75 mm filament that can be built from scratch. This is not necessarity optimized for rubber, and will not work with 3 mm filament in its basic form. This is an entry level extruder that can produce reliable prints, but is limited in filament size, will have slower rubber extrusion. Rubber Extruder is a 3mm extruder optimized for rubber, and also optimized for all other filaments.
Working Doc
Build
CAD
Turn this to a gallery:
https://drive.google.com/drive/folders/1-2ASyEawm84AMfz3_cA3HgT0HBIJbDA6
Extruder Heater Block - size:nullkb - FreeCAD -File:Heaterblock.fcstd
Extruder Base Block - size:nullkb - FreeCAD -File:Baseblock.fcstd
Extruder Filament throat and Heat Break - size:nullkb - FreeCAD -File:Heatbreak.fcstd
Nozzle - size:nullkb - FreeCAD -File:Simple extruder nozzle.fcstd
- Simpleextruderspring.png
Spring - size:nullkb - FreeCAD -File:Simpleextruderspring.fcstd
Bearing Bracket - FreeCAD -File:Simpleextruderbearingbracket.fcstd. STL - File:Simpleextruderbearingbracket.stl
Spring Base Bracket - FreeCAD -File:Simpleextruderspringbasebracket.fcstd. STL - File:Simpleextruderspringbasebracket.stl
Reverse Engineering Pictures
Turn this to a gallery:
https://drive.google.com/drive/folders/1-2ASyEawm84AMfz3_cA3HgT0HBIJbDA6
Links
- Low cost 3D printer BOM - Simple 3D Printer BOM