Chris DeAngelis Log
| Quick Links |
December 18, 2013
- added video to Inverter
- created and uploaded File:Step wave inverter concept.skp
December 14, 2013
It is my understanding that the .step file format is the most compatible 3D cad format. It is based on ISO (International Standards Organization). when saving a 3d assembly as a step file, dimensions are preserved, and parts are segregated. The main problem with step files, (which is possible to overcome) is that if you design a cylinder by drawing a 2d circle and extruding it (push/pull), you can later adjust the diameter of the circle, which the cylinder diameter is linked to. In a step file, the 2d circle is lost, and it may be impossible to adjust the cylinder diameter.
The software I am currently experimenting with is as follows:
- freecad
- sketchup
- solidworks
- hypermesh
- salome
- openSCAD
- catia
December 7, 2013
Completed the design for the Torch Table Tensioning System in Sketchup: File:OpenSourceEcologyTorchTable.skp
|
|
|
|
|
December 4, 2013
- Started to draft a new version of the wiki's frontpage: Proposed Main Page
- Starting FEM analysis on the CEB Press Press Foot. Investigating "tamper design" alternative.
Summer 2013
June 23 through June 29
June 27, 2013
- Reinventing the wheel, OSE Style!
- File:Steel wheel.skp
June 24, 2013
=Fabrication Instructions
=
June 16 through June 22
June 19, 2013
- Major update to GVCS Modules wiki page
June 18, 2013
- converted steel wheel parts to DXF for CNC Machining
June 17, 2013
- created dual pedal
June 9 through June 15
June 15, 2013
- created June 2013 hydraulic order form (also seen above)
June 14, 2013
- Major update to File:Truck full.skp using up to date versions of the front and back modules
June 13, 2013
- began research on the truck's steering system
- added link to Google Doc of the Truck Hydraulics
- found a possible hydraulic foot pedal:
- drew out the Truck hydraulics using Dia software
June 12, Wednesday
- changed cab module, added floor
- adjusted dimensions
- created a simplified model of the seat sourced bellow.
- Found a seat that we can use for the GVCS.
- http://www.surpluscenter.com/item.asp?item=1-3987
- created youtube video of pivot module
- https://www.youtube.com/watch?v=zb4bAliQHXw&feature=share
June 11, Tuesday
- added some hydraulic controls
- enhanced pivot design with dual vertical hinge configuration.
=Meeting Notes
=
June 10, Monday
- major changes to the Truck Cab.
- moved powercubes behind drivers
- modularized driver cab and powercube cab to streamline fabrication
- adjusted width of the front cab to allow for attachment of the trucks central hinge system
- optimized truck pivot File:Truck full.skp
- interlocking hinges increase friction, but distribute axle loads much more evenly
June 2 through June 8
June 7, Friday
- OSE Truck suspension system with leaf springs
June 6, Thursday
- added leaf springs
- Progress on the front cab
- added leg room, finished roll cage
June 5, Wednesday
- File:Truck front.skp
- Pushed forward Truck Cab design
- created models of driver and passenger to help get a feel for the size and space of the Cab.
- Updated Warehouse.skp
- Also found some good images that helped brainstorm ideas
June 4, Tuesday
File:Quick attach.skp
June 3, Monday
File:Quick attach.skp
May 26 through June 1
May 31, 2013
File:Adjusted 1-4 scale.skp
- Created 1:4 scale of microtrac trac for 3d scale model printing purposes
May 30, 2013
Arrived at Factor e Farm today. Got some food and supplies from Dungy's and Dollar General. Purchased 2 boxes of probiotic formula for the HabLab septic tank. Added a full box to the tank. System should get a half box every month. Created a public expense list, with public commenting enabled, here.