Vertical Shaft Brick Kiln

From Open Source Ecology
Revision as of 18:01, 15 April 2016 by Rasmus (talk | contribs) (→‎Related Pages On This Wiki: fixed broken internal link)
Jump to navigation Jump to search
Vertical Shaft Brick Kiln, VSBK in Chambo, Ecuador - Horno Vertical Continuo HVC

About

  • updraft kiln for firing bricks
  • developed in China in the late 1960s during the cultural revolution
  • updraft = heat is reused
  • firing shaft is very well insulated on all four sides, minimizing heat loss
  • bricks are loaded at the top and removed at ground level in a continuous process (see animation below for details)
  • combines low cost of updraft firing with high fuel economy
  • operation very similar to that of a vertical shaft lime kiln

Videos

vsbk (vertical shaft brick kiln) from sajid on Vimeo.

Related Pages On This Wiki

Pros and Cons vs. Compressed Earth Bricks

Pro:

  • no stabilizer needed (e.g. lime, flyash, etc.), leading to energy savings
  • no liquid fuel needed (e.g. diesel, ethanol) to run the CEB press; energy savings from fuel and distillation for fuel
  • uses low-cost / low-quality fuel such as pyrolysis gas from other processes
  • carbon negativity more easily achieved (if part of a Biochar/Brick Co-production System)
  • reduced wear and tear per brick (larger volume of bricks produced
  • possibly more stable and more weather-resistant bricks (this requires comparisons, lab testing)
  • bricks are of consistently high quality (in fact, they HAVE to be, because of the compressive force that they have to withstand during the stacking)
  • possibly less work needed per brick (though this is not clear)
  • less need to monitor bricks over weeks (e.g. curing of CEBs)
  • possibility to re-used waste heat (space heating for applications such as greenhouses, fish tanks, etc.)

Con:

  • possibly increased fuel use per brick (this is not certain, as the VSBK is very efficient, and the fuel use for CEBs is not zero either)
  • a larger installation means less flexibility (the facility is not mobile)
  • potential air pollution problems (this is largely a factor of higher volume/concentration of production)

Development Proposal

The standard VSBK is coal-fired. As shown in the animation above (on Vimeo), pieces of coal are scattered onto the bricks from the top. If such a brick kiln were re-designed as part of a pyrolysis system (e.g. Biochar/Brick Co-production System), what would it look like? How could firing the central bricks be assured if gas enters from the sides?

Further Information (links)