File:Leftcorner.stl
Jump to navigation
Jump to search
Leftcorner.stl (file size: 82 KB, MIME type: application/sla)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Production Engineering
1 mm
- D3D v19.06 3 - using 1 mm nozzle.
- Custom Profile - File:D3D1906 3 leftcorner.ini
- (note that FeF Microfactory has generic profile) - cuts off 5 mm at bottom. No brim.
Notes
- In cold temp - 11C - extruder goes up only to 230C, and that is only at 33% of the above profile. Extruder does have a sock.
- Print came off the bed at 80C bed, winter profile has 100C bed and 8 lines of brim.
0.4 mm
- D3D v19.06 2 - File:D3d1906 2 corner custom.ini. 0.4 mm nozzle.
- 9 hours 19 min, 104 grams
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 22:07, 18 September 2020 | (82 KB) | Marcin (talk | contribs) | Dummy file. |
| 22:06, 18 September 2020 | (82 KB) | Marcin (talk | contribs) | 105% for easier fit. | |
| 04:03, 31 October 2019 | (82 KB) | Marcin (talk | contribs) | In position for printing. Note that 5 mm cut off at bottom comes from profile. | |
| 00:29, 31 October 2019 | (82 KB) | Marcin (talk | contribs) |
You cannot overwrite this file.
File usage
The following 4 pages use this file: