CEB Press Build Instructions
Jump to navigation
Jump to search
| CEB Press | ||
|---|---|---|
| Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews | 
| |
This page will hold the final version of the Build Instructions after the wiki reorganization. This is a list of pages that might hold relevant info. These need to be consolidated here: --Conor 10:00, 20 February 2011 (PST)
- CEB Fabrication
- CEB Automation Prototype II
- Arduino Control of CEB Prototype 2
- FeF Liberator Fabrication
- Grate Shaker
- CEB Press 2
- CEB Automation Prototype II
- The Liberator Assembly
- The Liberator Full Release - Mechanical Fabrication
- dxf files
- [1]
- The_Liberator_Beta_v1.0_Specifications
- Bill_of_materials_for_The_Liberator_II
- pdfs
- Calculated_Bill_of_Materials_for_The_Liberator_Beta_v1.0
From this page you will find information on how to build the different models of Compressed Earth Brick (CEB) press machines that the Open Source Ecology group have designed.
"The Liberator I" - Part Fabrication Guides
- Arms - primary
- Arms - secondary
- Controller box and cord
- Feet
- Frame with main cylinder
- Grate mounts
- Hopper sheet metal
- Hopper mounting plate
- Hopper supports
- Hoses - Secondary cylinder hose unit
- Hoses - Shaker and main cylinder
- Hoses - Main hose unit
- Legs
- Roller guides
- Secondary cylinder
- Secondary cylinder sensor unit
- Sensor - Main cylinder
- Sensor - Secondary cylinder
- Sensor - Soil
- Soil grate
- Soil loading drawer
- Soil Shaker motor unit
- Soil Shaker
- Solenoid valve
Final Assembly and Job Site Setup