Ikea Lack Enclosure

Basics

• This is a version of a 3D Printer Enclosure that uses Ikea Lack tables as the main framing element
• Various designs use different 3D Printed brackets, and are set up for different filament storage workflows
• This page aims to document existing Open Source Designs, Derive the best setup, and make a BOM (also maybe document User: Eric 's Build Progress)

A Design Posted to the website Printables by "X" Titled "X"

Existing Open Source Designs

Table Connection Only

• A Design Posted to the website Printables by "815 Design" Titled "Ikea Lack Table Storage Shelves"

Table Reinforcement

• Due to Ikea Lack tables being made from low grade Engineered Wood Products to reduce weight and cost, they aren't very rigid
  • This is compounded by the sole connection being dual sided bolts in a drilled but not tapped hole
• Thus Reinforcements and Alternative Joinery can be of use
• Designs:
  • A Design Posted to the website Printables by "3DesignsCH" Titled "Ikea Lack Table Reinforcement"
  • A Design Posted to the website Printables by "JADV" Titled "IKEA LACK reinforcement"