April Production Run

• See also April_2011_Production_Run_Balance_of_System
• See also April_2011_Production_Run_Hydraulics_BOM
• See also April_2011_Production_Run_Bolts_BOM
• See also April_2011_Production_Run_BOM_Combined_Cut_List_Collapsed
• See also April_2011_Production_Run_BOM_Combined_Cut_List
• See also April 2011 Production Run BOM

Tools

• [1] Magnectic Drill, $480
• [1] Stamford 3-phase generator, 24kW, 2-bearing - [1] $1420
• [1] Hobart MegaMig 450 welder, $500 used
• [1] Hobart 200A welder, $300 used
• [1] 3-phase wall plug - frikkin' $60 - I wish I had a 3D printer
• [1] Digital Tachometer - [2] $14
• [1] Morse 4 Live Center for Lathe
• [1] 1-3/8" drill bit for wheel shafts
• [1] hydraulic motor for direct 1800RPM generator drive - [3]

Tractor

Frame

• Frame proper
• Wheel mounting plates
• Cylinder mounting plates

Wheels

• Shafts
• Bearings
• Couplers

Hydraulics

• Valves
• Hoses
• Cylinders
• Cylinder pins
• Hydraulic motors

Seat and Safety

• Safety harness
• Seat
• Top grate

Power Cube

Hydraulics

• Pump
• Filter
• Strainer

Engine

• Engine
• Coupler
• Throttle cable
• Muffler

Electrical

• Battery
• Starter switch

CEB Press

Controller

• solenoid drivers
• Arduino
• breakout shield
• Fuse holder
• Connectors
• Box
• Safety plug

Sensors

• PVC
• Encapsulant
• Hall sensor
• Wire
• Magnets

Structure

• Sheet metal
• Rebar
• Angle
• Eyes
• Legs
• Feet
• Drawer
• Press plate
• Chamber closure
• Magnet mounts

a