Power Cube VII

See Power Cube 6 for latest Power Cube Documentation. Tom is currently building Power Cube VII - optimizing form factor for ergonomics. The power cube after that is Power Cube VIII. See Machine Naming Convention.

Date

• Slated for Sun Nov 11 - Monday Nov 12.
• Tom Griffing is Guest Collaborative Production Run Director

Preparation

• Lathe up and running for spline coupler
  • Tom has a coupler jig
• Lathe gearing via PowerCube + 6 Spline PTO Motor
• Ordering hose crimping dies from Sweiger
• Getting 2 more Millermatic 200 Welders.

BOM

• Using http://opensourceecology.org/wiki/Power_Cube_6/Bill_of_Materials
  • Hydraulics, Metal, engine, other, hardware - all good
  • Get hose crimper and avoid hoses from Surpluscenter
• Power Cube VII Surplus Center Order
• Power Cube VII Steel Order

Fabrication Diagram

See Fabrication Diagram explanation.

Overview:

edit

edit

Frame

edit

Notes

1. Use ironworker for mitered cuts
2. When welding each member check for parallelism and flat planes

Engine Mount

edit

Power HyperCube VII

HyperCube for Hypermodularity.

edit

Quick Connect Plate for Power Cube Pump Detail

edit

Fabrication

Coupler -

Research

• Mechanical shaft quick coupling patent - [1]