D3D v18.12

From Open Source Ecology
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Build at Highland County Community College

Introduction

  • v18.12 is same as v18.10 in 3D Printer Genealogy except that we used a modified Lulzbot Mini omnidirectional fan shroud for print cooling

Build at Highland Community College

  • Feb 11, 2019
  • Used 13" frame with 1" symmetric extension consisting of half idler pieces under the Universal Axis
  • Titan Aero 3mm extruder, using 1.75 mm filament without problem
  • Y axis pretested with 300 mm/sec motion

Highland.jpg

Extruder

Extruder CAD

CAD of Parts

D3D_Part_Library#D3D_16.22

Manual

See 3D Printer Manual. Note that the manual covers up to the Titan Aero extruder - but it does not cover the new omnidirectional fan shroud that we borrowed from the Lulzbot Mini 2 friendly 3D printer.

Code

Links