File:CNC Torch 1in carriage.fcstd
Jump to navigation
Jump to search
CNC_Torch_1in_carriage.fcstd (file size: 92 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
- Second to last 281 kb file is good.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 02:45, 28 June 2019 | (92 KB) | Marcin (talk | contribs) | Double version start. |
| 02:21, 28 June 2019 | (46 KB) | Marcin (talk | contribs) | Simplified extended version. | |
| 02:18, 28 June 2019 | (281 KB) | Marcin (talk | contribs) | Extended to close holes. | |
| 02:15, 28 June 2019 | (281 KB) | Marcin (talk | contribs) | Extended height to close the outer holes. | |
| 23:16, 11 October 2017 | (181 KB) | Lex Berezhny (talk | contribs) | Reduced base from 5.9" long to 142mm. | |
| 19:30, 11 October 2017 | (165 KB) | Lex Berezhny (talk | contribs) | Reduced base from 6" long to 5.9". | |
| 01:12, 11 October 2017 | (165 KB) | Lex Berezhny (talk | contribs) | ||
| 23:12, 10 October 2017 | (166 KB) | Lex Berezhny (talk | contribs) | Bolt holes moved a tiny bit back from edge. Lines up with metal plate. | |
| 21:37, 10 October 2017 | (165 KB) | Lex Berezhny (talk | contribs) | Increased length of long side from 5.9" to 6.0". Moved bolt holes on each end by 0.1" towards the edge. | |
| 21:29, 10 October 2017 | (165 KB) | Lex Berezhny (talk | contribs) | Changed bearing grove from 1.3" to 1.36". |
You cannot overwrite this file.
File usage
The following 4 pages use this file: