Solar Combined Heat Power System

From Open Source Ecology
(Redirected from Solar Turbine CHP System)
Jump to: navigation, search

A solar combined heat and power system utilizes the heat of the sun directly, with solar concentrators running a power cycle that has been proven in geothermal plants.

One key is to develop an efficient solar turbine. At Factor e Farm we have access to a 4 kW boundary layer turbine for this purpose, and are presently adopting it for operation on solar steam. Conceptually - the problem is simple - capturing the energy of an expanding gas in a rotor, to convert the energy to electricity. A solar turbine is a tractable problem, and deserves full attention. With 1 kW of insolation from every square meter on earth, such a proposition must be considered seriously. This includes possibilities of thermal storage when the sun does not shine - just do the basic feasibility calculations and convince yourself that this is possible - even for extended periods beyond 12 hour nights. Check out the open source project for further background on a large scale implementation. Note that technical drawings exist for a 50% efficient solar turbine - look for the C. Christopher Newton thesis at - but fabrication costs need to be proven on such project. All in all, backup power - such as electricity derived from biofuel combustion in an engine - could be used - but it is more interesting to utilize a backup stove that can produce the necessary heat for the turbine cycle. This is especially useful in conjunction with space and greenhouse heating in the winter. Moreover, MIT's Fab Lab has done work in optimizing diesel engines produced by Vigyan Ashram in India ( - and these may be available for opensourcing. If so, it may be reasonable to produce diesel engines locally at OSE for backup power, and optimizing them for waste vegetable oil operation. Price predictions are $2-4k per balance of system kilowatt.



Review of Project Status

We have chosen the boundary layer turbine (such as the Tesla Turbine) as the working turbine choice, since we identified a working prototype from Granett Engineering.

  • 9.07 - preparing technical drawings and materials for second prototype of the Granett turbine

Current Work

Developments Needed



Background Debriefing

Information Work

Hardware Work


Development Work Template

Product Definition


General Scope

Product Ecology



Scaleability is most crucial in this project. We are pursuing a design with a focus on how scale can be achieved with minimal modifications. As such, the system is designed for stand-alone remote power applications (under 1 kW) to home (1 kW) and village (100 kW) scales. If the the BLT is used with other fuel sources, this is prime for mobile applications - vehicles and all devices which require hybrid power drive.

Analysis of Scale

Lifecycle Analysis

Enterprise Options

Development Approach


Development Budget

Value Spent
Value available
Value needed

Deliverables and Product Specifications

The Solar Turbine CHP system product package revolves around, (1), a turnkey, scaleable, robust, year-round, solar turbine electricity production system, and, (2), a flexible fabrication infrastructure for the same. Product specifications, in the simplest implementation, are:

  • 1 kW electrical output , 6 hours per day average in a sunny climate
  • Solar concentrator collectors with water as the working fluid - proven technology
  • 8 disk boundary layer turbine as the heat engine - proven technology
  • Open source electrical generator - covered in Electric Motors/Generators
  • Recirculating water system
  • $950/kW material cost for electrical generation, using off-shelf materials
    • 128 square foot collector system, 4 panels of 4x8 feet -theoretically good for 4 kW electrical generation - $432
      • Glazing - $32/ panel at Menards
      • Glazing angle supports: $40
      • Structure - 40 feet of 1 1/4" x 1/8" square tubing 90 cents/foot - $36
    • Collector - $76
      • Tube - 1x6 inch rectangular tube, 1/8" wall -$40
      • Insulation - $20
      • Glazing -$16
    • Turbine $290
      • Stainless steel - 10 square feet, .12" thick = $100 in used form
      • Shaft - $20
      • Bearings - $20
      • Hydrodynamic seals - $100
      • Casing - $20
      • Nozzle - $20
      • Bolts - $10
    • Generator - $150

Theoretical efficiency: 34%

  • Solar collectors - 4% reflection loss from glass, 4% reflection loss for transmission through glass collector enclosure, 10% heat transfer loss to working medium., 20% radiative heat loss, 20% conductive heat loss from working fluid - 58% loss total before reaching turbine
  • Turbine - 90% efficient
  • Electrical generator 90% efficient
  • Overall - .42*.9*.9= .34 efficiency

See the talk page for discussions.

Thermal insolation: 1kW/m^2

All components are based on flexible fabrication open source design


Also, the solar collectors, turbine, and electrical generator are completely scaleable via modularity, such that system power may be from from 1 to 100 kW

Flexible Fabrication infrastructure:

  • XY torch table - $200 in structural materials, 2 screw drives with 2 motors, open source controller
  • CO2 or YAG laser, 200W
  • Drill and milling machine

Industry Standards

Market and Market Segmentation

Salient Features and Keys to Success

Technical Design

Product System Design

Diagrams and Conceptual Drawings

Pattern Language Icons
Structural Diagram
Funcional or Process Diagram

Technical Issues

Deployment Strategy

Performance specifications


Design Calculations
Structural Calculations
Power Requirements
Ergonomics of Production
Time Requirements
Economic Breakeven Analysis
Scaleability Calculations
Growth Calculations

Technical Drawings and CAD

CAM Files

Component Design - Boundary Layer Turbine (BLT)

The Boundary Layer Turbine is based on a prototype from collaborator Dan Granett of Granett Engineering. The 12 inch diameter turbine produced 4 kW of electric power in test runs, at a cost of $500 in materials plus fabrication costs.


  • Overview of turbine, generator coupling, turbine disks, nozzles, testing, balancing:

Turbine overview.jpg

  • Technical drawing of turbine disks:

Turbine disks.jpg

  • Conceptual diagram of turbine seals, 16 total in prototype (4 kW output without proper seals)

Turbine seals.jpg

  • Turbine case and fabrication diagrams:

Turbine case.jpg

  • The disks were made of .059" thickness material. The spacers were .032".


  • The shaft:


  • Notes on correcting shaft, spacer, and disk alignment, as there is a discrepancy in the above diagrams:
    • change the center hole radius to .625" on the disk and the spacer, that will bring the holes into line with the shaft
    • there should be 3 shaft key slots instead of 2.
    • change the shaft slots to 1/4" x 1/8"

Research Literature

Background theory:

  • Experimental Investigation of the Flow Between Corotating Disks - R.Adams, W.Rice Transactions of the ASME p.844 Sept 1970
  • Laminar Throughflow of a Fluid Containing Particles Between Corotating Disks - Truman, Rice, Jankowski Journal of Fluids Engineering vol.101 p.87 Mar. '79
  • Laminar Throughflow of Varying-Quality Steam Between Corotating Disks - Truman, Rice, Jankowski Transactions of the ASME p. 194 vol.100 June '78

Look at the cover page of these papers

  • Numerical Simulation of the Flow Field in a Friction-Type Turbine (Tesla Turbine) - A.Ladino - School of Engineering National University of Colombia, Institute of Thermal Powerplants Vienna University of Tecnology - 2004.

Look at the Numerical Simulation (Tesla Turbine - 1913)

Performance specifications

Performance calculations

Technical drawings and CAD

CAM files whenever available


Deployment and Results

Production steps

Flexible Fabrication or Production

Bill of materials

Pictures and Video


Documentation and Education


Enterprise Plans

Resource Development =

Identifying Stakeholders

Information Collaboration

Wiki Markup
Addition of Supporting References
Production of diagrams, flowcharts, 3D computer models, and other qualitative information architecture
Technical Calculations, Drawings, CAD, CAM, other



Preordering working products



User/Fabricator Training and Accreditation

Standards and Certification Developmen



Volunteer grantwriters

Professional, Outcome-Based Grantwriters

Collaborative Stakeholder Funding

Tool and Material Donations

Charitable Contributions