File:CNC Torch 1708 Motor interface.fcstd: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Marcin uploaded a new version of File:CNC Torch 1708 Motor interface.fcstd)
No edit summary
Line 3: Line 3:
=Notes=
=Notes=
*October 10 version is cleaned of underlying shapes to allow a boolean trimming
*October 10 version is cleaned of underlying shapes to allow a boolean trimming
*217k version has sketches. The ones after that are generated from the 217k file by removing sketches and adding a pocket to extend the nut catcher hole.

Revision as of 06:51, 11 October 2017

[1]

Notes

  • October 10 version is cleaned of underlying shapes to allow a boolean trimming
  • 217k version has sketches. The ones after that are generated from the 217k file by removing sketches and adding a pocket to extend the nut catcher hole.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current01:55, 3 October 2019 (186 KB)Marcin (talk | contribs)Retry.
01:53, 3 October 2019 (186 KB)Marcin (talk | contribs)Deepened belt hole for 15 mm belt.
01:43, 3 October 2019 (159 KB)Marcin (talk | contribs)This is the 2016 original from Michel, for 6 mm belt, to be reworked for 15 mm belt.
01:41, 3 October 2019 (159 KB)Marcin (talk | contribs)This is the 2016 original from Michel, for 6 mm belt, to be reworked for 15 mm belt.
07:55, 11 October 2017 (61 KB)Marcin (talk | contribs)Updated rod hole from 0.9 to 1.0"
07:52, 11 October 2017 (65 KB)Marcin (talk | contribs)
06:50, 11 October 2017 (81 KB)Marcin (talk | contribs)Version with nut cather bolt holes reaching beyond nut catcher.
21:53, 10 October 2017 (54 KB)Marcin (talk | contribs)Narrowed it down to make 2 fit on a Lulzbot Mini 6" print bed.
00:30, 7 October 2017 (217 KB)Lex Berezhny (talk | contribs)Widened belt hole from 5.08mm to 13mm to fit the double pulley.
02:41, 16 August 2017 (210 KB)Polemidis (talk | contribs)