Revision as of 23:16, 14 February 2019

Introduction

v18.12 is same as v18.10 in 3D Printer Genealogy except that we used a modified Lulzbot Mini omnidirectional fan shroud for print cooling

Used 13" frame with 1" symmetric extension consisting of half idler pieces under the Universal Axis
Titan Aero 3mm extruder, using 1.75 mm filament without problem
Y axis pretested with 300 mm/sec motion

Underslung Extruder Base without fan and shroud - [1]. With fan and shroud - [2]. Ready for printing - [3]
Stock Titan Aero mount bracket. See [4]. Bracket - [5] - STEP + STL. Check out drawings from E3D - [6]. STEP of Bracket - File:Bracket.fcstd
Titan Aero with motor - [7]
Titan Aero mount top plate. File:Brackettop.fcstd.
Simplified carriage: File:Universal axis carriage side.fcstd. (From D3D Part Library)
Sensor holder. Print at 100%. File:Sensholder.fcstd. File:Sensholder.stl.
Lulzbot Mini 2 OSE Mod Fan Shroud. File:Lulzbotmini2shroud.fcstd. Original source file with sketches from Lulzbot- [8]. STL - File:Fanshroud.stl.
Lulzbot Mini 2 Extruder [9].