Latest revision as of 21:04, 3 October 2019

Notes

Oct 2 2019 - Need to fix version history. When a new file is uploaded, downloading goes only to the file below it. I verified it twice - the last file loads the previous file, and there's no way to download the latest file, until a new file is loaded above that. Does this fix itself? Will check tomorrow if the latest file updated to the correct file. Issue is persistent after checking on Oct 3.
11 Oct 2017 has nut catcher holes that are too deep.
October 10 version is cleaned of underlying shapes to allow a boolean trimming
217k version has sketches. The ones after that are generated from the 217k file by removing sketches and adding a pocket to extend the nut catcher hole.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	01:55, 3 October 2019	(186 KB)	Marcin (talk \| contribs)	Retry.
	01:53, 3 October 2019	(186 KB)	Marcin (talk \| contribs)	Deepened belt hole for 15 mm belt.
	01:43, 3 October 2019	(159 KB)	Marcin (talk \| contribs)	This is the 2016 original from Michel, for 6 mm belt, to be reworked for 15 mm belt.
	01:41, 3 October 2019	(159 KB)	Marcin (talk \| contribs)	This is the 2016 original from Michel, for 6 mm belt, to be reworked for 15 mm belt.
	07:55, 11 October 2017	(61 KB)	Marcin (talk \| contribs)	Updated rod hole from 0.9 to 1.0"
	07:52, 11 October 2017	(65 KB)	Marcin (talk \| contribs)
	06:50, 11 October 2017	(81 KB)	Marcin (talk \| contribs)	Version with nut cather bolt holes reaching beyond nut catcher.
	21:53, 10 October 2017	(54 KB)	Marcin (talk \| contribs)	Narrowed it down to make 2 fit on a Lulzbot Mini 6" print bed.
	00:30, 7 October 2017	(217 KB)	Lex Berezhny (talk \| contribs)	Widened belt hole from 5.08mm to 13mm to fit the double pulley.
	02:41, 16 August 2017	(210 KB)	Polemidis (talk \| contribs)

You cannot overwrite this file.

The following 4 pages use this file:

@@ Line 1: / Line 1: @@
+[http://opensourceecology.org/wiki/File:Torch_table-7.FCStd]
+=Notes=
+*'''Oct 2 2019 - Need to fix version history. When a new file is uploaded, downloading goes only to the file below it. I verified it twice - the last file loads the previous file, and there's no way to download the latest file, until a new file is loaded above that. Does this fix itself? Will check tomorrow if the latest file updated to the correct file.''' Issue is persistent after checking on Oct 3.
+*11 Oct 2017 has nut catcher holes that are too deep.
+*October 10 version is cleaned of underlying shapes to allow a boolean trimming
+*217k version has sketches. The ones after that are generated from the 217k file by removing sketches and adding a pocket to extend the nut catcher hole.