SEH 2 Kitchen and Bathroom Part Library

Utility Wall Part Library

Cabinets

• 

  Cabinets. - FreeCAD source - Rosebud-SeedA-v2.fcstd is at [1]. Iterations - File:Cabinets.fcstd.

Water

• 

  3/4" Pressure Relief Valve for water. McMaster full CAD - [2] - FreeCAD simplification -File:1"-pvc-elbow.fcstd,

• 

  1" PVC Elbow - FreeCAD -File:1"-pvc-elbow.fcstd,

• 

  1" water heater drain pan adapter. FreeCAD -File:Drainpanadapter.fcstd

• 

  1" NPT to 3/4" sharkbite fitting. FreeCAD -File:1to34sharkbite.fcstd

• 

  1" cross. FreeCAD -File:1cross.fcstd

• 

  1" to 3/4" bushing. FreeCAD -File:134bush.fcstd

• 

  3/4" pressure reducer. Simplification in FreeCAD -File:34pessurereducer.fcstd

• 

  3/4" NPT male to female valve. Full size source [3]. Simplification in FreeCAD -File:34mfvalve.fcstd

• 

  Cold Water Lines. - FreeCAD -File:Coldlines.fcstd

• 

  Water heater. - FreeCAD -File:Waterheater.fcstd

• 

  Water supply manifold. - FreeCAD -File:Watersupply.fcstd

• 

  1/2" push to connect valve. McMaster - [4] - FreeCAD -File:12pushconnectvalve.fcstd

• 

  1/2" push to connect tee.. McMaster - [5] - FreeCAD -File:12sharktee.fcstd

• 

  2" to 1" wye.. McMaster - [6] - FreeCAD -File:21wye.fcstd

Plumbing

• 

  Utility Wall assembly. Taken to Gitlab 1.22MB - [7]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -File:Utewallassy.fcstd

• 

  Plumbing only. Not finished. See source at Gitlab. - FreeCAD -File:Plumminonly.fcstd

• 

  3" to 3" wye. Aka long offset tee. In our case, this goes from 3" to 4". McMaster - [8]. FreeCAD -File:3to3wye.fcstd

• 

  45 Degree Test. For sink connection. - File:45degtest.fcstd

• 

  Double Sink Drain. Double sink drain. - File:Doublesinkdrain.fcstd

• 

  Horizontal bath drain. - FreeCAD -File:Horizbathdrain.fcstd

• 

  Simple 2" trap. - FreeCAD -File:Simple2trap.fcstd

• 

  Second floor Toilet Drain. - FreeCAD -File:Toiletdrain.fcstd

• 

  First floor Toilet Drain. - FreeCAD -File:Firstfloortoiletdrain.fcstd

• 

  4" double cleanout. McMaster - [9]. FreeCAD -File:Doublecleanout.fcstd

• 

  Toiled flange with closet elbow. McMaster - [10]. FreeCAD -File:Toiletflange.fcstd

• 

  3" 45 Degree PVC Elbow. McMaster - [11]. FreeCAD -File:345elbow.fcstd

• 

  3" to 2" reducer bushing.. From McMaster [12]. - FreeCAD -File:3to2reducer.fcstd.

• 

  2" Combination Wye. From McMaster [13]. - FreeCAD -File:2combowye.fcstd.

• 

  3" street elbow, 22.5 degree. From McMaster [14]. - FreeCAD -File:3in225street.fcstd.

• 

  3" Sanitary Tee. From McMaster [15]. - FreeCAD -File:3santee.fcstd

• 

  3" PVC Elbow. Standard height of 4.75" as in [16]. - size:20kb - FreeCAD -File:3"-pvc-elbow.fcstd

• 

  3" to 1.5" reducer bushing - FreeCAD -File:3to15bushing.fcstd

• 

  3" double wye - size:80kb - FreeCAD -File:3wye.fcstd

• 

  3" 45 degree street elbow - size:80kb - FreeCAD -File:345streetbend.fcstd

• 

  1.5" 45 degree street elbow - size:80kb - FreeCAD -File:1545streetbend.fcstd

• 

  1.5" elbow - size:30kb - FreeCAD -File:15elbow.fcstd

• 

  Bath drain kit. - FreeCAD -File:Bathdrainkit.fcstd

• 

  Rough plumbing. - FreeCAD -File:Roughplummin.fcstd

• 

  Utility Wall with cutout. - FreeCAD -File:Utewallframeleft.fcstd

• 

  Utility Wall without cutout. - FreeCAD -File:Utewallframeright.fcstd

• 

  Partial frame. - FreeCAD -File:Utewallpartial.fcstd

• 

  10 foot wall, 2x4 lumber. - FreeCAD -File:10footwall.fcstd

• 

  8 foot wall frame, 2x4 lumber. - FreeCAD -File:8footwall.fcstd

• 

  8 foot wall frame, 2x4 lumber, 39" long. - FreeCAD -File:8foot39frame.fcstd

• 

  3.5 cubic foot dryer. - FreeCAD -File:Dryer.fcstd

• 

  3.5 cubic foot washer. - FreeCAD -File:Washer.fcstd

• 

  Shower Tub. - FreeCAD -File:Showertub.fcstd

• 

  Air Admittance Valve. - FreeCAD -File:Airadmittance.fcstd

• 

  Laundry standpipe. - FreeCAD -File:Laundrystandpipe.fcstd

• 

  Washer outlet box. - FreeCAD -File:Washeroutlet.fcstd

Working Doc

edit

Includes

• Pex for delivery
• Water heating
• Drain, Waste, Vent including dryer and shower
• Water supply for kitchen and bath

Related

• Utilities concept - Seed Home 2 Utility Panel Conceptual Design
• Fab Tool Icons - mostly tools, and high pressure hydraulics
• Biodigester Part Library - includes hydronics for heating and other fittings for gas collection. Includes sink blackwater.
• Hydronics Part Library - focusing on hydronic heating components.
• PVC Pipe and Fittings Library - all types of fittings, including FreeCAD generator.
• See also Seed_Home_v2_3D_CAD#Plumbing_Rough-In and Seed_Home_v2_3D_CAD#Plumbing_Final