SEH 2 Kitchen and Bathroom Part Library: Difference between revisions

From Open Source Ecology

Jump to navigation Jump to search

Revision as of 02:15, 12 April 2022

Utility Wall Part Library

Cabinets

Cabinets. - FreeCAD source - Rosebud-SeedA-v2.fcstd is at [1]. Iterations - File:Cabinets.fcstd.

Water

3/4" NPT to Sharkbite adapter.- FreeCAD -File:34npttoshark.fcstd.
1/2"-1/2"-3/4" Tee. Placeholder for push-fit of same size. - FreeCAD -File:1234tee.fcstd.
3/4" sharkbite elbow.. McMaster - [2] - FreeCAD -File:34sharkel.fcstd.
3/4" push to connect tee.. McMaster - [3] - FreeCAD -File:34sharktee.fcstd
1/2" 22 degree PVC elbow - FreeCAD -File:22degel.fcstd,
3/4" NPT to Socket PVC Adapter - FreeCAD -File:34npttosocket.fcstd,
3/4" PVC Elbow - FreeCAD -File:34"-pvc-elbow.fcstd,
3/4" Pressure Relief Valve for water. McMaster full CAD - [4] - FreeCAD simplification -File:1"-pvc-elbow.fcstd,
1" PVC Elbow - FreeCAD -File:1"-pvc-elbow.fcstd,
1" water heater drain pan adapter. FreeCAD -File:Drainpanadapter.fcstd
1" NPT to 3/4" sharkbite fitting. FreeCAD -File:1to34sharkbite.fcstd
1" cross. FreeCAD -File:1cross.fcstd
1" to 3/4" bushing. FreeCAD -File:134bush.fcstd
3/4" pressure reducer. Simplification in FreeCAD -File:34pessurereducer.fcstd
3/4" NPT male to female valve. Full size source [5]. Simplification in FreeCAD -File:34mfvalve.fcstd
Cold Water Lines. - FreeCAD -File:Coldlines.fcstd
Water heater. - FreeCAD -File:Waterheater.fcstd
Water supply manifold. - FreeCAD -File:Watersupply.fcstd
1/2" push to connect valve. McMaster - [6] - FreeCAD -File:12pushconnectvalve.fcstd
1/2" push to connect tee.. McMaster - [7] - FreeCAD -File:12sharktee.fcstd
2" to 1" wye.. McMaster - [8] - FreeCAD -File:21wye.fcstd

Plumbing

Utility Wall assembly. Taken to Gitlab 1.22MB - [9]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -File:Utewallassy.fcstd
Plumbing only. Not finished. See source at Gitlab. - FreeCAD -File:Plumminonly.fcstd
3" to 3" wye. Aka long offset tee. In our case, this goes from 3" to 4". McMaster - [10]. FreeCAD -File:3to3wye.fcstd
45 Degree Test. For sink connection. - File:45degtest.fcstd
Double Sink Drain. Double sink drain. - File:Doublesinkdrain.fcstd
Horizontal bath drain. - FreeCAD -File:Horizbathdrain.fcstd
Simple 2" trap. - FreeCAD -File:Simple2trap.fcstd
Second floor Toilet Drain. - FreeCAD -File:Toiletdrain.fcstd
First floor Toilet Drain. - FreeCAD -File:Firstfloortoiletdrain.fcstd
4" double cleanout. McMaster - [11]. FreeCAD -File:Doublecleanout.fcstd
Toiled flange with closet elbow. McMaster - [12]. FreeCAD -File:Toiletflange.fcstd
3" 45 Degree PVC Elbow. McMaster - [13]. FreeCAD -File:345elbow.fcstd
3" to 2" reducer bushing.. From McMaster [14]. - FreeCAD -File:3to2reducer.fcstd.
2" Combination Wye. From McMaster [15]. - FreeCAD -File:2combowye.fcstd.
3" street elbow, 22.5 degree. From McMaster [16]. - FreeCAD -File:3in225street.fcstd.
3" Sanitary Tee. From McMaster [17]. - FreeCAD -File:3santee.fcstd
3" PVC Elbow. Standard height of 4.75" as in [18]. - size:20kb - FreeCAD -File:3"-pvc-elbow.fcstd
3" to 1.5" reducer bushing - FreeCAD -File:3to15bushing.fcstd
3" double wye - size:80kb - FreeCAD -File:3wye.fcstd
3" 45 degree street elbow - size:80kb - FreeCAD -File:345streetbend.fcstd
1.5" 45 degree street elbow - size:80kb - FreeCAD -File:1545streetbend.fcstd
1.5" elbow - size:30kb - FreeCAD -File:15elbow.fcstd
Bath drain kit. - FreeCAD -File:Bathdrainkit.fcstd
Rough plumbing. - FreeCAD -File:Roughplummin.fcstd
Utility Wall with cutout. - FreeCAD -File:Utewallframeleft.fcstd
Utility Wall without cutout. - FreeCAD -File:Utewallframeright.fcstd
Partial frame. - FreeCAD -File:Utewallpartial.fcstd
10 foot wall, 2x4 lumber. - FreeCAD -File:10footwall.fcstd
8 foot wall frame, 2x4 lumber. - FreeCAD -File:8footwall.fcstd
8 foot wall frame, 2x4 lumber, 39" long. - FreeCAD -File:8foot39frame.fcstd
3.5 cubic foot dryer. - FreeCAD -File:Dryer.fcstd
3.5 cubic foot washer. - FreeCAD -File:Washer.fcstd
Shower Tub. - FreeCAD -File:Showertub.fcstd
Air Admittance Valve. - FreeCAD -File:Airadmittance.fcstd
Laundry standpipe. - FreeCAD -File:Laundrystandpipe.fcstd
Washer outlet box. - FreeCAD -File:Washeroutlet.fcstd

Working Doc

Includes

Pex for delivery
Water heating
Drain, Waste, Vent including dryer and shower
Water supply for kitchen and bath

Related

Utilities concept - Seed Home 2 Utility Panel Conceptual Design
Fab Tool Icons - mostly tools, and high pressure hydraulics
Biodigester Part Library - includes hydronics for heating and other fittings for gas collection. Includes sink blackwater.
Hydronics Part Library - focusing on hydronic heating components.
PVC Pipe and Fittings Library - all types of fittings, including FreeCAD generator.
See also Seed_Home_v2_3D_CAD#Plumbing_Rough-In and Seed_Home_v2_3D_CAD#Plumbing_Final

Retrieved from "https://wiki.opensourceecology.org/index.php?title=SEH_2_Kitchen_and_Bathroom_Part_Library&oldid=268974"