Seed Eco-Home 4 3D CAD: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(71 intermediate revisions by 2 users not shown)
Line 1: Line 1:
=Working Doc=
=Master Files=
<gallery perrow=6>
File:Cabinetsasbuilt.png|'''Cabinets as built.''' - [[File:Kitchencabbom.fcstd]].
 
 
File:masterelectrical.png|'''Master electrical + Electrical Boxes.''' - [[SH4_Electrical_Part_Library]].  Also '''Electrical Design.''' See [[SEH 4 Electrical]] with Maysville content in work doc.
 
File:seh2_plumbing.png|'''Seed Eco-Home Plumbing.''' Working doc is good - see [[SEH 4 Plumbing]] - CAD needs update. '''Subassemblies''' started at  [[Seed_Eco-Home_4_3D_CAD#Select_Details]]
File:seh2_watersystem.png|'''Seed Eco-Home Water Supply.''' Gitalb, almost positionally correct - [https://gitlab.com/marcin_ose/seh-2-water-system/-/tree/main/#modal-upload-blob]. File with 5 components but not fittings: [[File:seh2_watersystem.fcstd]].
 
File:seh4foundationplumbing.png|'''Seed Eco-Home Foundation Plumbing.''' FreeCAD- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/plumbing_rough-in_1.fcstd]
 
File:utewallassy.png|'''Utility Wall assembly.''' Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -[[File:utewallassy.fcstd]]
 
File:housewithpv.png|'''House with PV SH2 version.''' FreeCAD- [[File:housewithpv.fcstd]] - incomplete. Final submitted for engineering - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_15.fcstd]. IFC export - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/Seed_Eco-Home_082922.ifc]. '''Update with new PV panels and hybrid inverter system [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_16.fcstd]'''. No top trellis trim band. But, all above is 1000 sf. 1300 sf is [https://drive.google.com/file/d/144Nv-Esxe3_kN4BwLTOm7HYDOBJqvu0S/view].
 
File:pvpanelmounting.png|'''PV panel mounting.''' Seed Eco-Home 2 version. FreeCAD- [[File:pvpanelmounting.fcstd]]
 
File:taperedroof.png|'''Tapered roof.''' FreeCAD- [[File:taperedroof.fcstd]]
 
File:modularcarport.png|'''Modular Carport.''' FreeCAD- [[File:modularcarport.fcstd]]
 
File:Cabdsafsdf.png|'''Cabinets.''' - Not as built. Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Cabinets all - [[File:cabinets.fcstd]]. Cabinets pieces - [https://drive.google.com/drive/folders/19EANcq4E827mSh9vi0KCdMbK9KoncBlp]
 
File:Seh2.jpg|'''Catarina's FreeCAD 2022.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc].
 
File:bathlighting.png|'''Vanity lighting, fan, GFCI locations for bathroom.''' FreeCAD, see latest bathlighting file - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/tree/main]
 
File:Secondstoryframingl.png|'''Second Story Framing.''' This is just a simple copy of second floor. FreeCAD- [[File:secondstoryframing.fcstd]]
 
File:seh2_firstfloorbeadboard.png|'''First Floor Beadboard.''' FreeCAD- [[File:seh2_firstfloorbeadboard.fcstd]]
 
File:closet.png|'''Closet.''' FreeCAD- [[File:closet.fcstd]]
 
File:laundry.png|'''Laundry.''' FreeCAD- [[File:laundry.fcstd]]


<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQea1AP8qWGOztQH4MrYRqlFk3ryPco8IO6CMj_wk6FN3VDblY2ge429-bJMZyOQdeeSdb-rOFcY5h7/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>
File:houselocation.png|'''House Location Master File''' FreeCAD- [[File:houselocation.fcstd]]


[https://docs.google.com/presentation/d/196WsGOzcWs9zkkZrhZv8q9dE82_eVnWHhdphAez8GZU/edit#slide=id.g123f2be0d6c_0_3 edit]
File:masterinterface.png|'''Master interface design.''' FreeCAD- [[File:masterinterface.fcstd]]
</gallery>


=CM=
=CM=
*[[SEH Trellis]]
*[[SEH Trellis]]
*1300 + 2000 sf - [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Interior concept as to be built - 1.3k WHITE at [https://drive.google.com/drive/folders/1534QkF8WfZwMUOwwJ_Gp6S7zaT9K0Hf9]
*{{check}}1300 + 2000 sf - [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Interior concept as to be built - 1.3k WHITE at [https://drive.google.com/drive/folders/1534QkF8WfZwMUOwwJ_Gp6S7zaT9K0Hf9].
**Cabinets detail - It is found under OBI -> Designs -> Seed Home 2-> Rosebud 3 -> CAD ->  Technical -> Interior Assemblies -> Kitchen. [https://drive.google.com/drive/folders/1zPmdJvAnxawWzvSbX51Jj-0y96LjucdQ]
*1300 deco trellis technical [https://drive.google.com/drive/folders/1TPDGyB-GeoLM0HlHd1OCRSBeVAv7IePa]
*1300 deco trellis technical [https://drive.google.com/drive/folders/1TPDGyB-GeoLM0HlHd1OCRSBeVAv7IePa]
*The only place that shows the '''Trellis Top Band''' is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [https://drive.google.com/drive/folders/1ewZECHV3UEUlr1sZoUtx-AmjUFTM4s_1]
*The only place that shows the '''Trellis Top Band''' is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [https://drive.google.com/drive/folders/1ewZECHV3UEUlr1sZoUtx-AmjUFTM4s_1]
Line 67: Line 103:
</gallery>
</gallery>


=Master Files=
=Apertures=
<gallery perrow=6>
<gallery perrow=6>
File:electricalboxes.png |'''Electrical Boxes''' and other electrical detail. [[SH4_Electrical_Part_Library]]


File:seh4foundationplumbing.png|'''Seed Eco-Home Foundation Plumbing.''' FreeCAD- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/plumbing_rough-in_1.fcstd]


File:housewithpv.png|'''House with PV.''' FreeCAD- [[File:housewithpv.fcstd]] - incomplete. Final submitted for engineering - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_15.fcstd]. IFC export - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/Seed_Eco-Home_082922.ifc]. '''Update with new PV panels and hybrid inverter system [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_16.fcstd]'''. No top trellis trim band. But, all above is 1000 sf. 1300 sf is [https://drive.google.com/file/d/144Nv-Esxe3_kN4BwLTOm7HYDOBJqvu0S/view].
File:module48aperture.png|'''Module 48 main wire channel notch.''' FreeCAD -[[File:module48aperture.fcstd]].  


File:seh2_plumbing.png|'''Seed Eco-Home Plumbing.''' See [[SEH 4 Plumbing]]
</gallery>


File:seh2_watersystem.png|'''Seed Eco-Home Water Supply.''' FreeCAD with fittings - [https://gitlab.com/marcin_ose/seh-2-water-system/-/blob/main/seh2_water-system_4.fcstd] and one-item part tree - [https://gitlab.com/marcin_ose/seh-2-water-system/-/tree/main/#modal-upload-blob]. File with 5 components but not fittings: [[File:seh2_watersystem.fcstd]].  
=Quad Modules - Modules with Structure + MEP=
<gallery perrow=6>
File:quad37.png|'''Exterior Wall 37.''' With main stack vent and bath vent. [[File:Exteriorwall37.FCStd]].'''


File:electrical.png |'''Electrical Design.''' See [[SEH 4 Electrical]].
File:modulei2.png|'''Module i2.''' See also [[Water Heater Cabinet]]. FreeCAD -[[File:modulei2.fcstd]]


File:pvpanelmounting.png|'''PV panel mounting.''' FreeCAD- [[File:pvpanelmounting.fcstd]]
File:modulei1.png|'''Module i1.''' FreeCAD -[[File:modulei1.fcstd]].


File:taperedroof.png|'''Tapered roof.''' FreeCAD- [[File:taperedroof.fcstd]]
File:check.png|'''Module 14.'''FreeCAD -[[File:module14.fcstd]]. Master file at Gitlab - [https://wiki.opensourceecology.org/wiki/File:Module14.fcstd].


File:modularcarport.png|'''Modular Carport.''' FreeCAD- [[File:modularcarport.fcstd]]
File:subpanelinstall.png|'''Module 4 - Subpanel install.''' FreeCAD -[[File:subpanelinstall.fcstd]].


File:utewallassy.png|'''Utility Wall assembly.''' Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -[[File:utewallassy.fcstd]]  
File:module15.png|'''Module 15.'''FreeCAD -[[File:module15.fcstd]].
</gallery>


File:Cabdsafsdf.png|'''Cabinets.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Cabinets all - [[File:cabinets.fcstd]]. Cabinets pieces - [https://drive.google.com/drive/folders/19EANcq4E827mSh9vi0KCdMbK9KoncBlp]


File:Seh2.jpg|'''Catarina's FreeCAD 2022.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc].
=Select Details=


File:bathlighting.png|'''Vanity lighting, fan, GFCI locations for bathroom.''' FreeCAD, see latest bathlighting file - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/tree/main]
<gallery perrow=6 >


File:Secondstoryframingl.png|'''Second Story Framing.''' This is just a simple copy of second floor. FreeCAD- [[File:secondstoryframing.fcstd]]
File:tubframing.png|'''Tub framing.''' - [[File:tubframing.fcstd]]


File:seh2_firstfloorbeadboard.png|'''First Floor Beadboard.''' FreeCAD- [[File:seh2_firstfloorbeadboard.fcstd]]  
File:sh4stairs.png|'''Stair design for Seed Eco-Home 4''' - [[File:sh4stairs.fcstd]]


File:closet.png|'''Closet.''' FreeCAD- [[File:closet.fcstd]]
File:stackmount.png|'''Main vent stack mount blocking.''' - [[File:stackmount.fcstd]]


File:laundry.png|'''Laundry.''' FreeCAD- [[File:laundry.fcstd]]
File:escutcheon.png|'''Esutcheon for 2" IPS/PVC/Iron.''' - [[File:escutcheon.fcstd]]
File:stringer.png|'''Stair stringer.''' - [[File:stairstringer.fcstd]]
File:venthoodcab.png|'''Vent hood cabinet.''' - [[File:venthoodcab.fcstd]]
File:intwinassy.png|'''Interior Window Assembly.''' - [[File:intwinassy.fcstd]]
File:floor1sill.png|'''Floor 1 sills + apertures.''' - [[File:floor1sill.fcstd]]
File:floor2sill.png|'''Floor 2 sills + apertures.''' - [[File:floor2sill.fcstd]]
File:doublesinkplumbing.png|'''Double sink plumbing.''' - Gitlab- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/Double_Sink_Dim_Drawing.fcstd]


File:houselocation.png|'''House Location Master File''' FreeCAD- [[File:houselocation.fcstd]]
File:sinkplumbing.png|'''Sink plumbing.''' - [[File:sinkplumbing.fcstd]]


File:masterinterface.png|'''Master interface design.''' FreeCAD- [[File:masterinterface.fcstd]]
</gallery>


=Select Details=


<gallery perrow=6 >
File:toilet2plumbing.png|'''2nd Floor Toilet plumbing.''' - [[File:toilet2plumbing.FCStd]]


File:module67beadboard.png|'''Module 67 beadboard''' [[File:module67beadboard.fcstd]]
File:module67beadboard.png|'''Module 67 beadboard''' [[File:module67beadboard.fcstd]]


File:pvdcdiscoblocking.png|'''PV DC Disconnect Blocking''' [[File:pvdcdiscoblocking.fcstd]]


File:powercenterextblockinginside.png|'''Power Center Exterior Blocking -''' but looking from the inside. Has stud holes for PV LFMC. [[File:powercenterextblockinginside.fcstd]]
File:powercenterintblocking.png|'''Power Center Interior Blocking.''' Has stud holes for PV LFMC.[[File:powercenterintblocking.fcstd]]
File:powercenterextblocking.png|'''Power Center Exterior Blocking.''' Does not have stud holes for PV. [[File:powercenterextblocking.fcstd]]


File:sewertap.png|'''Sewer Ta[-''' 4" pipe onto 6" pipe. [[File:sewertap.fcstd]]
File:mainvent.png|'''Main vent.''' Near positionally correct. [[File:Mainvent.fcstd]]


File:heatpumpthru.png|'''Heat pump through-tube geometry.''' [[File:heatpumpthru.fcstd]]


File:powercenterextblockinginside.png|'''Power Center Exterior Blocking -''' but looking from the inside. Has stud holes for PV LFMC. [[File:powercenterextblockinginside.fcstd]]
File:heatpumpinterface.png|'''Heat pump interface plate.''' Includes tech drawing. [[File:heatpumpinterfaceplate.fcstd]]


File:powercenterintblocking.png|'''Power Center Interior Blocking.''' Has stud holes for PV LFMC.[[File:powercenterintblocking.fcstd]]
File:heatpumpdownspout.png|'''Heat pump downspout detail.''' [[File:heatpumpdownspout.fcstd]]


File:powercenterextblocking.png|'''Power Center Exterior Blocking.''' Does not have stud holes for PV. [[File:powercenterextblocking.fcstd]]
File:heatpump24000.png|'''Heat pump mounting for 24000 BTU Heat Pump.''' Also found in [[SH4 Electrical Part Library]]. - [[File:heatpump24000.fcstd]]


File:mainvent.png|'''Main vent.''' [[File:Mainvent.fcstd]]
File:deck.png|'''Front deck, floating.''' [https://drive.google.com/file/d/1s8XA6LmkRlaGqGlI9IY0wGp79pxVV2Lj/view]. Technical drawing: [[File:deck.fcstd]]




File:retainingwall.png|'''Retaining wall.''' [[File:retainingwall.fcstd]]
File:retainingwall.png|'''Retaining wall.''' [[File:retainingwall.fcstd]]
File:turningradius.png|'''Walkway + Driveway turning radius''' [[File:turningradius.fcstd]]
File:module4beadboard.png|'''Module 4 beadboard''' [[File:module4beadboard.fcstd]]
File:pvdcdiscoblocking.png|'''PV DC Disconnect Blocking''' [[File:pvdcdiscoblocking.fcstd]]
File:sewertap.png|'''Sewer Ta[-''' 4" pipe onto 6" pipe. [[File:sewertap.fcstd]]


File:gravelbox.png|'''Gravel box.''' [[File:gravelbox.fcstd]]
File:gravelbox.png|'''Gravel box.''' [[File:gravelbox.fcstd]]
Line 140: Line 196:




File:floor1sill.png|'''Floor 1 sills + apertures.''' - [[File:floor1sill.fcstd]]
 
File:floor2sill.png|'''Floor 2 sills + apertures.''' - [[File:floor2sill.fcstd]]
File:waterexpansiontank.png|'''Water expansion tank''' - [[File:waterexpansiontank.fcstd]]
File:waterexpansiontank.png|'''Water expansion tank''' - [[File:waterexpansiontank.fcstd]]


Line 147: Line 202:




File:wanxiang.png|'''Wanxiang 230W PV Panels  -28 panel array'''  Array, positionally correct X,Y - 1" off on Z. - [[File:wanxiang230.FCStd]]


File:doublesinkplumbing.png|'''Double sink plumbing.''' - Gitlab- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/Double_Sink_Dim_Drawing.fcstd]
File:panelmounting.png|'''Wanxiang 230W PV Panels.''' Single panel. Includes tech drawing of back mount - [[File:panelmounting.FCStd]]
 
File:sinkplumbing.png|'''Sink plumbing.''' - [[File:sinkplumbing.fcstd]]
 




File:toilet2plumbing.png|'''2nd Floor Toilet plumbing.''' - [[File:toilet2plumbing.FCStd]]
File:PVpanelmountingcad.png|'''PV Panel mounting CAD.''' Not positionally correct in Z direction, ok in X, Y - [[File:PVpanelmountingcad.FCStd]]


File:PVpanelmountingcad.png|'''PV Panel mounting CAD.''' - [[File:PVpanelmountingcad.FCStd]]
File:panelmounting.png|'''Wanxiang 230W PV Panels.''' Single panel. Includes tech drawing of back mount - [[File:panelmounting.FCStd]]


File:Powerladderangles.png|'''Power ladder angles.''' [[File:powerladderangles.fcstd]]. Source - [[File:28ladder.FCStd]]
File:Powerladderangles.png|'''Power ladder angles.''' [[File:powerladderangles.fcstd]]. Source - [[File:28ladder.FCStd]]
Line 182: Line 231:


File:foundationflashing.png|'''Foundation flashing geometry.''' - [[File:foundationflashing.FCStd]]
File:foundationflashing.png|'''Foundation flashing geometry.''' - [[File:foundationflashing.FCStd]]
File:wanxiang.png|'''Wanxiang 230W PV Panels  -28 panel array'''  Array. - [[File:wanxiang230.FCStd]]


File:railingprofile.png|'''Railing Profile.'''  [[File:railingprofile.fcstd]].  
File:railingprofile.png|'''Railing Profile.'''  [[File:railingprofile.fcstd]].  
Line 307: Line 354:
File:exteriorwall35.png|'''Exterior Wall 35.''' Build cheatsheet.  [[File:Exteriorwall35.FCStd]].'''[[File:SEH4Exteriorwall35.pdf]]'''
File:exteriorwall35.png|'''Exterior Wall 35.''' Build cheatsheet.  [[File:Exteriorwall35.FCStd]].'''[[File:SEH4Exteriorwall35.pdf]]'''
File:exteriorwall36.png|'''Exterior Wall 36.''' Build cheatsheet.  [[File:Exteriorwall36.FCStd]].'''[[File:SEH4Exteriorwall36.pdf]]'''
File:exteriorwall36.png|'''Exterior Wall 36.''' Build cheatsheet.  [[File:Exteriorwall36.FCStd]].'''[[File:SEH4Exteriorwall36.pdf]]'''
File:exteriorwall37.png|'''Exterior Wall 37.''' Build cheatsheet.  [[File:Exteriorwall37.FCStd]].'''[[File:SEH4Exteriorwall37.pdf]]'''
 
File:exteriorwall38.png|'''Exterior Wall 38.''' Build cheatsheet.  [[File:Exteriorwall38.FCStd]].'''[[File:SEH4Exteriorwall38.pdf]]'''
File:exteriorwall38.png|'''Exterior Wall 38.''' Build cheatsheet.  [[File:Exteriorwall38.FCStd]].'''[[File:SEH4Exteriorwall38.pdf]]'''
File:exteriorwall39.png|'''Exterior Wall 39.''' Build cheatsheet.  [[File:Exteriorwall39.FCStd]].'''[[File:SEH4Exteriorwall39.pdf]]'''
File:exteriorwall39.png|'''Exterior Wall 39.''' Build cheatsheet.  [[File:Exteriorwall39.FCStd]].'''[[File:SEH4Exteriorwall39.pdf]]'''
Line 490: Line 537:


</gallery>
</gallery>
=Foundation=
*From Catarina's folder - [https://drive.google.com/drive/folders/1xSnyMbsy6p_CJyLyHREWOhdzr2-UoSYv]
*More at [[Seed Eco-Home 4 3D CAD#Whole House Views]] and [[Seed Eco-Home 4 3D CAD#Select Details]]
[[Category: Seed Eco-Home]] [[Category: Seed Eco-Home 4]]

Latest revision as of 03:58, 25 February 2026

Master Files

CM

  • SEH Trellis
  • Check.png1300 + 2000 sf - [21]. Interior concept as to be built - 1.3k WHITE at [22].
    • Cabinets detail - It is found under OBI -> Designs -> Seed Home 2-> Rosebud 3 -> CAD -> Technical -> Interior Assemblies -> Kitchen. [23]
  • 1300 deco trellis technical [24]
  • The only place that shows the Trellis Top Band is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [25]

RH

SH4 Maysville Files

Tools

Module Generator

See FreeCAD Module Generator

Apertures

Quad Modules - Modules with Structure + MEP


Select Details

Second Floor Interior

First Floor Interior

HintLightbulb.png Hint: The first floor exterior walls sit on the sill so the interior walls start 1.5" lower. These panels have been designed to use 106.125" studs (1.5" longer than standard pre-cut studs) so they will be the same height as the exterior walls when they are in place. The utility channel spacers are also raised 1.5" to be at the same height as in the exterior walls

Build Cheatsheets

HintLightbulb.png Hint: Drawing Dimensioning Workbench is no longer maintained/updated by FreeCAD, though it is still fine to use. The supported workbench is called TechDraw.
FreeCAD Wiki

Protocol: Note that only single objects can be used in dimensional drawings with the Drawing Dimensioning workbench. For complex assemblies, simply collapse into simple copies of compounds - or compound STEP exports (to turn them into simple solids). As such - take master files - take the necessary selection - and turn into one dumb object. Then you can get nice dimensions. Save the file with teh pages included - pages with dimensions show up in another tab, though.


Whole House Views

(moved 1000 sf version to Savannah SH 5)

Exterior Walls

HintLightbulb.png Hint: Use PDF Files, not PNG Thumbnails for module drawings. Verify with crew leader that the drawing is correct before assembling

First Floor Interior

Second Floor Interior

(8' version is at Seed_Home_v2_3D_CAD#Build_Cheatsheets)

First Floor Exterior

Second Floor Exterior - 9' Version

See also - Computer Generated 2nd Floor Exterior Wall Modules by Coderjeff Master files for both 8' and 9' walls with detailed parts - Coderjeff 2nd Floor Exterior.

Plumbing Final

See more at SEH 4 Plumbing - latest work from March 2022 onwards, needs update for 9' walls.

Electrical

See SEH 4 Electrical

Stairs

https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules

Also - See Stairs

Stairs example.png


Foundation

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Seed_Eco-Home_4_3D_CAD&oldid=320451"