File:Seh2 wall 29.fcstd
Updated to 9' wall
The detailed file this was derived from is Seh2_9ft_panel.fcstd
Starting with that, switch FreeCAD to the Part menu, select all of the individual parts and click Create Compound, the select the compound and click Create Simple Copy. Finally, delete the Compound and all of the individual parts that were within the compound. This will leave the entire panel as a single component. You can rename this to module 29
The origin of the original panel was 0,0,0
If you click on the new component, you can change the placement angle and position.
For module 29, the angle should be 180 degrees, and the x ,y ,z positions should be 338, 192, and 121.125
Save as Seh_wall_29.fcstd to create this file.
This is now ready to merge into the master file.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 18:25, 7 August 2022 | (17 KB) | Laloeb (talk | contribs) | CAD File Type 2 - updates to match Master CAD |
| 18:25, 7 August 2022 | (9 KB) | Laloeb (talk | contribs) | CAD File Type 3 - updates to match Master CAD | |
| 03:33, 24 July 2022 | (9 KB) | Coderjeff (talk | contribs) | 9' wall in correct position | |
| 23:26, 13 July 2021 | (8 KB) | Coderjeff (talk | contribs) | set transparency | |
| 00:48, 12 July 2021 | (8 KB) | Coderjeff (talk | contribs) | z axis | |
| 20:53, 11 July 2021 | (7 KB) | Coderjeff (talk | contribs) | ||
| 20:15, 10 July 2021 | (7 KB) | Coderjeff (talk | contribs) | simple, xy positioned | |
| 19:15, 10 July 2021 | (12 KB) | Coderjeff (talk | contribs) |
- You cannot overwrite this file.
File usage
The following 3 pages link to this file:
