A-Z Instructionals: Difference between revisions

Revision as of 02:36, 15 December 2011

Unless otherwise noted, all steps are independent and can be done in any order.

Still need to be added in MAKE:

You'll need to have finished all other components in Machine Core and Frame Preparation and 2 Leg Holders

Before beginning assembly, insure you have finished all of the components listed above in the fabrication step.

An Arduino is the microprocessor that controls the CEB Press's actions. It must be programmed with the CEB Press's unique program for making bricks.

Old code:

@@ Line 4: / Line 4: @@
 Unless otherwise noted, all steps are independent and can be done in any order.
 ==Fabrication==
-#[http://makeprojects.com/Project/Simple-Plates/1719/1 Make the Simple Plates]
+#[http://makeprojects.com/Project/Simple-Plates/1719/1 Simple Plates]
-#[http://makeprojects.com/Project/CEB-Support-System/1718/1 Make the frame structural support components]
+#[http://makeprojects.com/Project/CEB-Support-System/1718/1 Frame structural support components]
+#[http://makeprojects.com/Project/CEB-Shaker-Mount/1717/1 Shaker Mounts]
+#[http://makeprojects.com/Project/CEB-Hopper-Supports-and-Grate-Supports/1722/1 Hopper Supports and Grate Mounts]
 Still need to be added in MAKE:
-===Structural Supports===
-*[[CEB Press/Manufacturing Instructions/Grate mounts|Grate mounts]]-[[Image:check.png]]
-*[[CEB Press/Manufacturing Instructions/Hopper supports|Hopper supports]]-[[Image:check.png]]
-**Needs [[CEB Press/Manufacturing Instructions/Soil Shaker|Soil Shaker]] (this should be dis-assembled, although you can do it assembled, its just heavier and more difficult to maneuver.)
 ===Soil Loading System===