Rototiller/Manufacturing Instructions/Shaft and Motor Frame: Difference between revisions
Jump to navigation
Jump to search
| Line 46: | Line 46: | ||
! align="center" |'''QTY.''' | ! align="center" |'''QTY.''' | ||
|- | |- | ||
| [[ | | [[:file:100522.JPG| Front Holder Welded Assembly]] || align="center"|1 | ||
|} | |} | ||
Revision as of 06:02, 22 December 2011
| |||||||||||||||||||
Overview
|
The shaft and motor frame supports the main shaft with the tines and provides a mounting location for the motor. |
Tools Required
Materials Required
| TYPE | SIZE | QTY. |
|---|---|---|
| Flat | 0.5" x 2 x 4.25 | 2 |
| Flat | 0.5 x 8 x 12 | 3 |
| Rectangular Tubing | 2" x 4" x 1/4"Thick | 1 |
Parts List and Drawings
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | Cross Tube | 1 |
| 2 | End Plate, Cross Tube | 2 |
| 3 | Plate, Motor End | 1 |
| 4 | Plate, Bearing | 2 |
Fabrication and Assembly Instructions
| Assembly Name | QTY. |
|---|---|
| Front Holder Welded Assembly | 1 |
- Cut piece parts as per part drawings
- Weld end plates onto rectangular cross tube
- Weld motor end plate and two bearing plates as per assembly drawing. Ensure each is welded strongly all around and that they are all parallel to each other