|The frame hinge links the bucket to the tool holder frame.
You will be making two of these as there is both a left and right side that are mirrors of eachother, but use the same sub-components
|Flat||0.75" x 4" x 6"||2|
|Square Tubing||2.5" x 2.5" x 3/16"Thick x 12"||2|
|Hex Nut, Steel||0.75"-10||2|
Parts List and Drawings
|ITEM NO.||PART NAME||QTY.|
|3||Steel Hex Nut 0.75"x10||2|
Fabrication and Assembly Instructions
|Pivot Weldment Left||1|
|Pivot Weldment Right||1|
- Cut piece parts as per part drawings
- Weld 3/4" nut onto square tubing centered on the 13/16" hole for both square tubings
- Weld square tubing to the Joint Plate as per the welded assembly drawings for the left and right side.