Rototiller/Manufacturing Instructions/Assembly: Difference between revisions
Jump to navigation
Jump to search
| (4 intermediate revisions by the same user not shown) | |||
| Line 95: | Line 95: | ||
| 37||Nut, Hex, Nylon Lock, 1"-8||2 | | 37||Nut, Hex, Nylon Lock, 1"-8||2 | ||
|} | |} | ||
==Hoses== | |||
*'''[2] 1/2"x12' hose - [https://www.surpluscenter.com/item.asp?item=905-12144&catname=hydraulic]''' | |||
*'''[1] 1/4"x12' hose - [https://www.surpluscenter.com/item.asp?item=916-14144&catname=hydraulic]''' | |||
==Quick Couplers== | |||
*'''[4] 30 gpm Quick Coupler, Body Size: 1/2, Thread Size: 3/4-14 NPT - [http://agandfarmsupply.com/shop/article_4000-5/COMPLETE-QUICK-COUPLING.html?] | |||
=Fabrication and Assembly Instructions= | =Fabrication and Assembly Instructions= | ||
| Line 102: | Line 108: | ||
! align="center" |'''QTY.''' | ! align="center" |'''QTY.''' | ||
|- | |- | ||
| Bucket Welded Assembly [[:file:100500-1.JPG| 1]] [[:file:100500-2.JPG| 2]] [[:file:100500-3.JPG| 3]]|| align="center"|1 | | Bucket Welded Assembly [[:file:100500-1.JPG| 1]] [[:file:100500-2.JPG| 2]] [[:file:100500-3.JPG| 3]] || align="center"|1 | ||
|} | |} | ||
[[file:100500-1.JPG| 500px]] | |||
[[file:100500-2.JPG| 500px]] | |||
[[file:100500-3.JPG| 500px]] | |||
Latest revision as of 07:33, 23 December 2011
| |||||||||||||||||||
Overview
|
This assembly combines all the welded assemblies and the additional piece parts fabricated into the final product. The only welding remaining is the top plate that covers the bucket with a hinge that is then welded to the bucket welded assembly.
Note: The hydraulic hoses and quick couplings are not shown in the fabrication drawings or pictures. |
Tools Required
Materials Required
Parts List and Drawings
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | BUCKET WELDMENT | 1 |
| 2 | PIVOT WELDMENT, LEFT | 1 |
| 3 | PIVOT WELDMENT, RIGHT | 1 |
| 4 | SMALL TUBE | 2 |
| 5 | FRONT HOLDER WELDMENT | 1 |
| 6 | PLATE, MOTOR MOUNT | 1 |
| 7 | SHAFT | 1 |
| 8 | TINE WELDMENT | 12 |
| 9 | ARM REST WELDMENT | 2 |
| 10 | COUPLER, WELDMENT | 1 |
| 11 | ROD, HINGE | 1 |
| 12 | ROD, PIN | 2 |
| 13 | HINGE PIPE | 8 |
| 14 | TOP PLATE | 1 |
| 15 | 7.63 CU IN PTO DRIVE MOTOR | 1 |
| 16 | BEARING, FS210 Frame, 1-7/8" | 2 |
| 17 | DOUBLE SPLIT SHAFT COLLAR- 1-7/8" | 1 |
| 18 | COTTER PIN, 1/8" X 2-1/2" | 6 |
| 19 | FITTING, SAE 10M TO 1/2"NPTF SWIVEL | 2 |
| 20 | FITTING, SAE 4M TO 1/4"NPTF SWIVEL | 1 |
| 21 | Bolt, HHCS, 0.3750-16x3x3 | 1 |
| 22 | Bolt, HHCS, 0.5000-13x2.5x2.5 | 2 |
| 23 | Bolt, HHCS, 0.6250-11x2x2 | 8 |
| 24 | Bolt, HHCS, 0.75-10x1.25x1.25 | 14 |
| 25 | Bolt, HHCS, 0.75"-10x1.5"x1.5" | 4 |
| 26 | Bolt, HHCS, 0.75"-10x2"x2" | 2 |
| 27 | Bolt, HHCS, 0.75"-10x5.5"x1.75" | 2 |
| 28 | Bolt, HHCS, 1.0"-8x3"x2.25" | 2 |
| 29 | Washer, Wide, 0.5" | 2 |
| 30 | Washer, Wide, 0.625" | 8 |
| 31 | Washer, Wide, 0.75" | 6 |
| 32 | Washer, Wide, 1.0" | 4 |
| 33 | Nut, Hex, 0.375"-16 | 1 |
| 34 | Nut, Hex, 0.5"-13 | 2 |
| 35 | Nut, Hex 0.6250"-11 | 8 |
| 36 | Nut, Hex, 0.75"-10 | 4 |
| 37 | Nut, Hex, Nylon Lock, 1"-8 | 2 |
Hoses
Quick Couplers
- [4] 30 gpm Quick Coupler, Body Size: 1/2, Thread Size: 3/4-14 NPT - [3]
Fabrication and Assembly Instructions
| Assembly Name | QTY. |
|---|---|
| Bucket Welded Assembly 1 2 3 | 1 |
