Latest revision as of 16:46, 23 December 2011

Overview

The arm rests acts as a hard stop that sets the level that the shaft and motor frame assembly can go down to.

TYPE	SIZE	QTY.
Square Tubing	2" x 2" x 0.25"Thick x 13.5"	2
Flat	0.5" x 2" x 4"	2

ITEM NO.	PART NAME	QTY.
1	Small Tube, Arm	2
2	Plate, Arm Rest	2

Assembly Name	QTY.
Arm Rest Welded Assembly	2

Cut piece parts are per drawings
Weld the plate onto the tube all around using the dimensions shown in the assembly drawing

@@ Line 10: / Line 10: @@
 =Materials Required=
+{| class="wikitable"
+|-
+! align="center" |'''TYPE'''
+! align="center" |'''SIZE'''
+! align="center" |'''QTY.'''
+|-
+| Square Tubing || 2" x 2" x 0.25"Thick x 13.5"|| align="center"|2
+|-
+| Flat || 0.5" x 2" x 4" || align="center"|2
+|}
-=Part Fabrication=
+=Parts List and Drawings=
+{| class="wikitable"
+|-
+! align="center" |'''ITEM NO.'''
+! align="center" |'''PART NAME'''
+! align="center" |'''QTY.'''
+|-
+| align="center" |1 || [[:file:100533.JPG| Small Tube, Arm]] || align="center"|2
+|-
+| align="center" |2 || [[:file:100534.JPG| Plate, Arm Rest]] || align="center"|2
+|}
-=Assembly=
+=Fabrication and Assembly Instructions=
+{| class="wikitable"
+|-
+! align="center" |'''Assembly Name'''
+! align="center" |'''QTY.'''
+|-
+| [[:file:100532.JPG| Arm Rest Welded Assembly]] || align="center"|2
+|}
+# Cut piece parts are per drawings
+# Weld the plate onto the tube all around using the dimensions shown in the assembly drawing