Rototiller/Manufacturing Instructions/Piece Parts: Difference between revisions
Jump to navigation
Jump to search
| Line 40: | Line 40: | ||
| [[:file:100541.JPG| Top Plate]] || Large plate to cover the bucket || align="center"|1 | | [[:file:100541.JPG| Top Plate]] || Large plate to cover the bucket || align="center"|1 | ||
|- | |- | ||
| | | [[:file:100540| Hinge Pipe]] || Small pipe used to create hinge between top plate and bucket || align="center"| 8 | ||
|} | |} | ||
=Fabrication and Assembly Instructions= | =Fabrication and Assembly Instructions= | ||
# Cut pieces as per piece part drawings. | # Cut pieces as per piece part drawings. | ||
Revision as of 21:23, 23 December 2011
| |||||||||||||||||||
Overview
Here are the additional piece parts are required to be fabricated to complete the final assembly.
Tools Required
Materials Required
| TYPE | SIZE | LENGTH. |
|---|---|---|
| TUBING | 2" X 2" X 0.25"THK | 48" |
| FLAT | 0.5" X 6" | 8" |
| ROUND | ø1.875" | 52" |
| ROUND | ø0.5" | 58" |
Parts List and Drawings
| PART NAME | DESCRIPTION | QTY. |
|---|---|---|
| Small Tube | Connects bucket welded assembly to front frame | 2 |
| Plate, Motor Mount | Additional mounting plate for motor | 1 |
| Shaft | Main spinning shaft | 1 |
| Rod, Hinge | Long rod for cover plate hinge | 1 |
| Rod, Pin | Pins for locking in the tube between the bucket and front frame at a set distance | 2 |
| Top Plate | Large plate to cover the bucket | 1 |
| Hinge Pipe | Small pipe used to create hinge between top plate and bucket | 8 |
Fabrication and Assembly Instructions
- Cut pieces as per piece part drawings.