Open Source Agricultural Carbon Dioxide Generator: Difference between revisions
Jump to navigation
Jump to search
m (Fixed some typos) |
m (Minor Text Formating Fix) |
||
(One intermediate revision by the same user not shown) | |||
Line 22: | Line 22: | ||
=Basic Design= | =Basic Design= | ||
* | *This could either be a standalone unit, that is essentially a very [[Clean Burning]] [[Blowtorch]] inside an insulated enclosure, with or without heat removal and/or utilization, with a standard [[Ventilation Fittings | Fittings]] at the end (and an Optional [[Diffuser]] "Plug" if a [[Tube Ventilation]] system is not in use) | ||
*It could also be (or be used in combination with) some sort of [[Gas Scrubbing | Scrubbing]] + Metering System from a [[Pellet Stove]] / [[Rocket Mass Heater]], [[Generator]] , [[CHP]] system, or even a [[Universal Burner Unit]] ! | |||
**Could this could utilize standard [[HVAC Ducting]] and [[HVAC Baffles]] at the end? | |||
=BOM= | =BOM= |
Latest revision as of 22:29, 15 June 2022
Basics
- A device that generates carbon dioxide for use in greenhouses etc
- Uses some sort of fuel (Such as Ethanol, Methane, Methanol, Dimethyl Ether, or Biodiesel)
Used For
- Increasing the Carbon Dioxide concentration of a Greenhouse's atmosphere which increases yield (assuming everything else is addressed before moving on to using this see Law of the Minimum
Industry Standards
Existing Open Source Designs
Minimum Viable Product
- Could be combustion or fuel cell based
- Metered Output
- Clean Output (Only Carbon Dioxide, Water Vapor in the exhaust (or at least as close to this as reasonably possible) )
- Uses Waste Heat For Something (Be it home/water heating, thermoelectric, or a heat engine (Like a Stirling Engine ) )
- Integrated CO2 Monitoring
- Integrated Control System
Basic Design
- This could either be a standalone unit, that is essentially a very Clean Burning Blowtorch inside an insulated enclosure, with or without heat removal and/or utilization, with a standard Fittings at the end (and an Optional Diffuser "Plug" if a Tube Ventilation system is not in use)
- It could also be (or be used in combination with) some sort of Scrubbing + Metering System from a Pellet Stove / Rocket Mass Heater, Generator , CHP system, or even a Universal Burner Unit !
- Could this could utilize standard HVAC Ducting and HVAC Baffles at the end?