Seed Eco-Home 4 3D CAD: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(357 intermediate revisions by 5 users not shown)
Line 1: Line 1:
===Master Files===
=Working Doc=
<gallery perrow=6>


File:housewithpv.png|'''House with PV.''' FreeCAD- [[File:housewithpv.fcstd]] - incomplete. Final file 1.8MB CM- [https://drive.google.com/file/d/1v2gB28juvYIQVEguci2pwMEh03wzZs6G/view]. Final file with gutter, 5.5" taper, drip edge to engineer 7/28/22 [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/finished_SEH_3_for_Export.fcstd]. IFC export - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/Seed_Eco-Home_072922.ifc]. See Version Notes for export issue [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/wikis/Version-Notes]. '''Latest FreeCAD File 072922 - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/improved_export_clean_with_monolithic_1st_floor.FCStd]
<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQea1AP8qWGOztQH4MrYRqlFk3ryPco8IO6CMj_wk6FN3VDblY2ge429-bJMZyOQdeeSdb-rOFcY5h7/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>


File:pvpanelmounting.png|'''PV panel mounting.''' FreeCAD- [[File:pvpanelmounting.fcstd]]
[https://docs.google.com/presentation/d/196WsGOzcWs9zkkZrhZv8q9dE82_eVnWHhdphAez8GZU/edit#slide=id.g123f2be0d6c_0_3 edit]


File:taperedroof.png|'''Tapered roof.''' FreeCAD- [[File:taperedroof.fcstd]]
=CM=
*[[SEH Trellis]]
*{{check}}1300 + 2000 sf - [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Interior concept as to be built - 1.3k WHITE at [https://drive.google.com/drive/folders/1534QkF8WfZwMUOwwJ_Gp6S7zaT9K0Hf9].
**Cabinets detail - It is found under OBI -> Designs -> Seed Home 2-> Rosebud 3 -> CAD ->  Technical -> Interior Assemblies -> Kitchen. [https://drive.google.com/drive/folders/1zPmdJvAnxawWzvSbX51Jj-0y96LjucdQ]
*1300 deco trellis technical [https://drive.google.com/drive/folders/1TPDGyB-GeoLM0HlHd1OCRSBeVAv7IePa]
*The only place that shows the '''Trellis Top Band''' is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [https://drive.google.com/drive/folders/1ewZECHV3UEUlr1sZoUtx-AmjUFTM4s_1]


File:electrical.png |'''Electrical Design.''' FreeCAD -[[File:seh2electrical.fcstd]] start. Continued at Gitlab - [https://gitlab.com/opensourceecology.org/seh-2-electrical]. Latest - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/electrical_69.fcstd]. See also [[SEH 2 Electrical Design]] for part libraries and Design Doc [https://docs.google.com/presentation/d/1ryuVJO_YEAID97JgGmrzYeAFA_RrwwyLfWe0NdrobNc/edit#slide=id.g11ba6661126_0_15].
=RH=
*Google Drive - [https://drive.google.com/drive/folders/18afuCN4ttRhoXMgm-Bc2TD4N2Ndjmh2M]


File:verticalcrosssection.png|'''Vertical Cross Section.''' FreeCAD- [[File:verticalcrosssection.fcstd]]
=SH4 Maysville Files=
<gallery perrow=6>


File:modularcarport.png|'''Modular Carport.''' FreeCAD- [[File:modularcarport.fcstd]]
File:Shr.png|'''Seed Eco-Home 4 Maysville build.''' Catarina working file- [https://drive.google.com/file/d/144Nv-Esxe3_kN4BwLTOm7HYDOBJqvu0S/view]


File:masterinterface.png|'''Master interface design.''' FreeCAD- [[File:masterinterface.fcstd]]
File:interiormodules.png|'''Interior Modules.''' [[File:interiormodules.fcstd]]


File:houseassembly2.png|'''House Assembly - Master File'''. Started as whole house, but first floor was taken out and put into separate file. FreeCAD- [[File:houseassemblymaster.fcstd]]
File:moduleI1.png|'''Interior module I1.''' [[File:moduleI1.fcstd]]


File:seh2_firstfloor.png|'''House Assembly - First Floor Only'''. Includes carport. FreeCAD- [[File:seh2_firstfloor.fcstd]]  
File:module48.png|'''Wall module 48.''' Corner. [[File:module48.fcstd]]
</gallery>


File:utewallassy.png|'''Utility Wall assembly.''' Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -[[File:utewallassy.fcstd]]
=Tools=
<gallery perrow=6>


File:seh2_watersystem.png|'''Seed Eco-Home Water Supply.''' FreeCAD with fittings - [https://gitlab.com/marcin_ose/seh-2-water-system/-/blob/main/seh2_water-system_4.fcstd] and one-item part tree - [https://gitlab.com/marcin_ose/seh-2-water-system/-/tree/main/#modal-upload-blob]. File with 5 components but not fittings: [[File:seh2_watersystem.fcstd]].  
File:dewalt65cordlesscircular.png|'''Dewalt Cordless Circular Saw 6.5".''' Tool only.- FreeCAD -[[File:dewalt65circular.fcstd]].
File:interiorwalljig.png|'''Interior wall and door modules jig'''- FreeCAD -[[File:Sh4interiorwalljig.fcstd]].  


File:seh2_plumbing.png|'''Seed Eco-Home Plumbing.''' FreeCAD complete - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom#modal-upload-blob] and one-item part tree plumbing only - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/blob/main/One_Piece_Plumbing.fcstd]. See also '''[[SEH 2 Kitchen and Bathroom Part Library]]''' and Design Doc [https://docs.google.com/presentation/d/1fAUttuSxS-AJl8mnhjV0xwxMBkYRnjLqyuL0W04DwZM/edit#slide=id.gb328b2d63d_0_9]
</gallery>
 
File:Cabdsafsdf.png|'''Cabinets.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Cabinets all - [[File:cabinets.fcstd]]. Cabinets pieces - [https://drive.google.com/drive/folders/19EANcq4E827mSh9vi0KCdMbK9KoncBlp]


File:Seh2.jpg|'''Catarina's FreeCAD 2022.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc].
=Module Generator=


File:bathlighting.png|'''Vanity lighting, fan, GFCI locations for bathroom.''' FreeCAD, see latest bathlighting file - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/tree/main]
See [[FreeCAD Module Generator]]


File:2nd_interiorwalls.png|'''Second floor interior walls.'''. Includes risers. FreeCAD- [[File:2nd_interiorwalls.fcstd]]
<gallery perrow=6>


File:2nd_interiorwallrisers.png|'''Second floor interior wall risers.'''. FreeCAD- [[File:2nd_interiorwallrisers.fcstd]]  
File:beadboardgen.png|'''Interior sheathing generator.''' - FreeCAD -[[File:beadboardgen.fcstd]].


File:Secondstoryframingl.png|'''Second Story Framing.''' This is just a simple copy of second floor. FreeCAD- [[File:secondstoryframing.fcstd]]


File:seh2_firstfloorbeadboard.png|'''First Floor Beadboard.''' FreeCAD- [[File:seh2_firstfloorbeadboard.fcstd]]  
File:nailingboardgen.png|'''Nailing board.''' - FreeCAD -[[File:nailingboardgen.fcstd]].


File:trellis.png|'''Trellis.''' FreeCAD- [[File:trellis.fcstd]]


File:closet.png|'''Closet.''' FreeCAD- [[File:closet.fcstd]]
File:customblockinggen.png|'''Custom blocking.''' For mounting all types of devices. FreeCAD -[[File:customblockinggen.fcstd]].


File:laundry.png|'''Laundry.''' FreeCAD- [[File:laundry.fcstd]]


File:bathroomonly.png|'''Plumbing on slab''' FreeCAD- [[File:Plumbing_on_slab.fcstd]]
File:exteriorblockinggen.png|'''Exterior blocking.''' Creates first or second floor blocking. Corrects for 2nd floor window lowering. Allows corners. FreeCAD -[[File:exteriorblockinggen.fcstd]].


File:houselocation.png|'''House Location Master File''' FreeCAD- [[File:houselocation.fcstd]]


File:doorwindow2.png|'''Door and window module for adjustment''' FreeCAD- [[File:doorwindow.fcstd]]
File:ladderblockinggen.png|'''Ladder blocking Module generator.''' To use - toggle the folder you need in the part tree. FreeCAD -[[File:ladderblockinggen.fcstd]].


</gallery>


===Select Details===
File:doormodulegen.png|'''Interior Door Module generator.''' - FreeCAD -[[File:custominteriordoorgen.fcstd]].


<gallery perrow=6 >


File:pvracking.png|PV rack. FreeCAD- [[File:pvrack.fcstd]]  
File:utechanblocking.png|'''Utility channel blocking generator.''' Includes proper shortening of blocking- FreeCAD -[[File:utechanblockinggen.fcstd]]. 2x4 or other lumber selection for the wall type. Blocking itself is 2x4.


File:trellisv2.png|Second iteration trellis. Positioned for master file. <br/>FreeCAD- [[File:trellisv2.fcstd]]  
File:mainframinggen.png|'''Main framing generator.''' - FreeCAD -[[File:mainframinggenerator.fcstd]]. First, main structural submodule. Divided into submodules as in working doc [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g23da8acac2c_0_119]


File:carportfooterassy.png|Car port footer assembly. 22" and 28". Dug with 22" auger. <br/>FreeCAD- [[File:carportfooterassy.fcstd]]


File:carportfooter.png|Car port footer. 22" and 28". Dug with 22" auger. <br/>FreeCAD- [[File:carportfooter.fcstd]]  
File:check.png|'''Monolithic house design kernel - module generation''' - FreeCAD -[[File:Modulegenerator.fcstd]]. Took it as far as spreadsheet broke. Divided into submodules as in working doc [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g23da8acac2c_0_119]


File:2ndflbackwalldete.png|Second floor back wall detail. 9.5" height of cover. <br/>FreeCAD- [[File:2ndflbackwalldete.fcstd]]
</gallery>


File:2ndfloorutechan.png|'''Second floor utility channel.''' Still 10" cover, may want 9.5"- [[File:2ndfloorutechan.fcstd]]
=Apertures=
<gallery perrow=6>


File:Blockignstetch.png|'''Floor joist blocking.''' With sketch. [[File:blockingsketch.fcstd]]


File:Blockingcover.png|'''Floor joist cover.''' With sketch. [[File:blockingcover.fcstd]]
File:module48aperture.png|'''Module 48 main wire channel notch.''' FreeCAD -[[File:module48aperture.fcstd]].


File:roofdetail.png|Vertical cross section Detail <br/>FreeCAD- [[File:roofdetail.fcstd]]
</gallery>


File:blockingdetail2.png|First Floor Ceiling Detail <br/>FreeCAD- [[File:blockingdetail.fcstd]]  
=Quad Modules - Modules with Structure + MEP=
<gallery perrow=6>
File:quad37.png|'''Exterior Wall 37.''' With main stack vent and bath vent.  [[File:Exteriorwall37.FCStd]].'''


File:southwalldetail3.png|South wall Detail <br/>FreeCAD- [[File:southwalldetail.fcstd]]  
File:modulei2.png|'''Module i2.''' See also [[Water Heater Cabinet]]. FreeCAD -[[File:modulei2.fcstd]]


File:SEH2stairs.png|Stringerless stairs for SEH 2 <br/>FreeCAD- [[File:SEH2stairs.fcstd]]  
File:modulei1.png|'''Module i1.''' FreeCAD -[[File:modulei1.fcstd]].


File:stringerless.png|Stringerless stairs concept. '''See also [[Stairs]].''' <br/>FreeCAD- [[File:stringerless.fcstd]]  
File:check.png|'''Module 14.'''FreeCAD -[[File:module14.fcstd]]. Master file at Gitlab - [https://wiki.opensourceecology.org/wiki/File:Module14.fcstd].


File:toptrim5.png|Top wall trim <br/>FreeCAD- [[File:toptrim.fcstd]]  
File:subpanelinstall.png|'''Module 4 - Subpanel install.''' FreeCAD -[[File:subpanelinstall.fcstd]].


File:landing-box.png|Landing Box <br/>FreeCAD- [[File:Landing.fcstd]]
File:module15.png|'''Module 15.'''FreeCAD -[[File:module15.fcstd]].
</gallery>
</gallery>


===Build Cheatsheets===
=Master Files=
Protocol: Note that only single objects can be used in dimensional drawings with the Drawing Dimensioning workbench. For complex assemblies, simply collapse into simple copies of compounds - or compound STEP exports (to turn them into simple solids). As such - take master files - take the necessary selection - and turn into one dumb object. Then you can get nice dimensions. Save the file with teh pages included - pages with dimensions show up in another tab, though.
 
 
<gallery perrow=6>
<gallery perrow=6>
File:Cabinetsasbuilt.png|'''Cabinets as built.''' - [[File:Kitchencabbom.fcstd]].


File:foundationcheatsheet.png|'''Foundation cheatsheet.''' Extracted from electrtical_68 file -[[File:foundationcheatsheet.FCStd]].
File:interiorwall1.png|'''Interior Wall 1.''' Bath Tub 1 wall. Extracted from plumbing_32 file. - [[File:interiorwall1.FCStd]].
File:interiorwall2.png|'''Interior Wall 2.''' Next to tub. Extracted from plumbing_32 file. - [[File:interiorwall2.FCStd]].
File:interiorwall3.png|'''Interior Wall 3 - thin.'''Extracted from electrical_68 file and modified. - [[File:interiorwall3.FCStd]].
File:interiorwall4.png|'''Interior Wall 4 - bath door.''' And 6 is small module on top. Extracted from electrical_69 file and modified. - [[File:interiorwall4.FCStd]].
File:interiorwall5.png|'''Interior Wall 5 - behind washer.''' And 7 is small module on top - [[File:interiorwall5.FCStd]].
File:interiorwall17.png|'''Interior Wall 17 and 18. Laundry closet wall.''' - [[File:interiorwall17.FCStd]].
File:interiorwall19.png|'''Interior Wall 19. Laundry closet cap.''' - [[File:interiorwall19.FCStd]].
File:ventfanlocation.png|'''Vent Fan Location.''' - [[File:ventfanlocation.FCStd]].
</gallery>


File:masterelectrical.png|'''Master electrical + Electrical Boxes.''' - [[SH4_Electrical_Part_Library]].  Also '''Electrical Design.''' See [[SEH 4 Electrical]] with Maysville content in work doc.


====Exterior Walls====
File:seh2_plumbing.png|'''Seed Eco-Home Plumbing.''' Working doc is good - see [[SEH 4 Plumbing]] - CAD needs update. '''Subassemblies''' started at  [[Seed_Eco-Home_4_3D_CAD#Select_Details]]
<gallery perrow=6>
File:seh2_watersystem.png|'''Seed Eco-Home Water Supply.''' Gitalb, almost positionally correct - [https://gitlab.com/marcin_ose/seh-2-water-system/-/tree/main/#modal-upload-blob]. File with 5 components but not fittings: [[File:seh2_watersystem.fcstd]].


File:exteriorwall1.png|'''Exterior Wall 1.''' Build cheatsheet.  [[File:exteriorwall1.FCStd]].
File:seh4foundationplumbing.png|'''Seed Eco-Home Foundation Plumbing.''' FreeCAD- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/plumbing_rough-in_1.fcstd]
File:exteriorwall2.png|'''Exterior Wall 2.''' Build cheatsheet.  [[File:exteriorwall2.FCStd]].


File:utewallassy.png|'''Utility Wall assembly.''' Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -[[File:utewallassy.fcstd]]


</gallery>
File:housewithpv.png|'''House with PV SH2 version.''' FreeCAD- [[File:housewithpv.fcstd]] - incomplete. Final submitted for engineering - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_15.fcstd]. IFC export - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/Seed_Eco-Home_082922.ifc]. '''Update with new PV panels and hybrid inverter system [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_16.fcstd]'''. No top trellis trim band. But, all above is 1000 sf. 1300 sf is [https://drive.google.com/file/d/144Nv-Esxe3_kN4BwLTOm7HYDOBJqvu0S/view].


===First Floor Exterior===
File:pvpanelmounting.png|'''PV panel mounting.''' Seed Eco-Home 2 version. FreeCAD- [[File:pvpanelmounting.fcstd]]


<gallery perrow=6>
File:taperedroof.png|'''Tapered roof.''' FreeCAD- [[File:taperedroof.fcstd]]


File:positionallycorrectmod1.png|'''Wall Module 1''' SweetHome3D- [[File:seh2wall1.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_1.fcstd]]<br/>[[Build Cheatsheet for Wall Module 1|Build Cheatsheet]]  
File:modularcarport.png|'''Modular Carport.''' FreeCAD- [[File:modularcarport.fcstd]]


File:seh2wall2.png|'''Wall Module 2''' SweetHome3D- [[File:seh2wall2.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_2.fcstd]]<br/>[[Build Cheatsheet for Wall Module 2|Build Cheatsheet]]
File:Cabdsafsdf.png|'''Cabinets.''' - Not as built. Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Cabinets all - [[File:cabinets.fcstd]]. Cabinets pieces - [https://drive.google.com/drive/folders/19EANcq4E827mSh9vi0KCdMbK9KoncBlp]


File:seh2wall3rework4.png|'''Wall Module 3''' SweetHome3D- [[File:seh2_wall_3.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_3.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_3|Build Cheatsheet]]  
File:Seh2.jpg|'''Catarina's FreeCAD 2022.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc].


File:seh2wall4freecad.png|'''Wall Module 4''' SweetHome3D- [[File:seh2_wall_4.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_4.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_4|Build Cheatsheet]]  
File:bathlighting.png|'''Vanity lighting, fan, GFCI locations for bathroom.''' FreeCAD, see latest bathlighting file - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/tree/main]


File:seh2wall5.png|'''Wall Module 5''' SweetHome3D- [[File:seh2_wall_5.sh3d.zip]]<br/> [[Build_Cheatsheet_for_Wall_Module_5|Build Cheatsheet]]<br/> FreeCAD- [[File:seh2_wall_5.fcstd]] -  Same as Wall Module 17 (opposite long side left corner)
File:Secondstoryframingl.png|'''Second Story Framing.''' This is just a simple copy of second floor. FreeCAD- [[File:secondstoryframing.fcstd]]


File:seh2wall6.png|'''Wall Module 6''' SweetHome3D- [[File:seh2_wall_6.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_6.fcstd]] <br/>[[Build_Cheatsheet_for_Wall_Module_6|Build Cheatsheet]]  
File:seh2_firstfloorbeadboard.png|'''First Floor Beadboard.''' FreeCAD- [[File:seh2_firstfloorbeadboard.fcstd]]  


File:seh2wall7.png|'''Wall Module 7''' SweetHome3D- [[File:seh2_wall_7.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_7.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_7|Build Cheatsheet]]  
File:closet.png|'''Closet.''' FreeCAD- [[File:closet.fcstd]]


File:adjustmentmodule8.png|'''Wall Module 8''' SweetHome3D- [[File:seh2_wall_8.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_8.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_8|Build Cheatsheet]] Adjustment module.
File:laundry.png|'''Laundry.''' FreeCAD- [[File:laundry.fcstd]]


File:seh2wall9.png|'''Wall Module 9''' SweetHome3D- [[File:seh2_wall_9.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_9.fcstd]] <br/> [[Build_Cheatsheet_for_Wall_Module_9|Build Cheatsheet]]  
File:houselocation.png|'''House Location Master File''' FreeCAD- [[File:houselocation.fcstd]]


File:seh2_wall_10.png|'''Wall Module 10''' SweetHome3D- [[File:seh2_wall_10.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_10.fcstd]] <br/>[[Build_Cheatsheet_for_Wall_Module_10|Build Cheatsheet]]
File:masterinterface.png|'''Master interface design.''' FreeCAD- [[File:masterinterface.fcstd]]
</gallery>


File:Seh2 wall 11.png|'''Wall Module 11''' SweetHome3D- [[File:seh2_wall_11.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_11.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_11|Build Cheatsheet]]
=Select Details=


File:seh2wall12.png|'''Wall Module 12''' SweetHome3D- [[File:seh2_wall_12.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_12.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_12|Build Cheatsheet]]. Structure same as Module 23.
<gallery perrow=6 >


File:seh2wall1freecad.png|'''Wall Module 13''' SweetHome3D- [[File:seh2_wall_13.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_13.fcstd]] <br/>[[Build_Cheatsheet_for_Wall_Module_13|Build Cheatsheet]] Same as Wall 1 structure. But - Wall 1 has a hole for electrical.
File:tubframing.png|'''Tub framing.''' - [[File:tubframing.fcstd]]


File:seh2wall14.png|'''Wall Module 14''' SweetHome3D- [[File:seh2_wall_14.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_14.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_14|Build Cheatsheet]]  
File:sh4stairs.png|'''Stair design for Seed Eco-Home 4''' - [[File:sh4stairs.fcstd]]


File:seh2wall15.png|'''Wall Module 15''' SweetHome3D- [[File:seh2_wall_15.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_15.FCStd]]<br/> [[Build_Cheatsheet_for_Wall_Module_15|Build Cheatsheet]]  
File:stackmount.png|'''Main vent stack mount blocking.''' - [[File:stackmount.fcstd]]


File:Seh2wall16.png|'''Wall Module 16''' SweetHome3D- [[File:seh2_wall_16.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_16.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_16|Build Cheatsheet]] Same structure as Module 4.
File:escutcheon.png|'''Esutcheon for 2" IPS/PVC/Iron.''' - [[File:escutcheon.fcstd]]
File:stringer.png|'''Stair stringer.''' - [[File:stairstringer.fcstd]]
File:venthoodcab.png|'''Vent hood cabinet.''' - [[File:venthoodcab.fcstd]]
File:intwinassy.png|'''Interior Window Assembly.''' - [[File:intwinassy.fcstd]]
File:floor1sill.png|'''Floor 1 sills + apertures.''' - [[File:floor1sill.fcstd]]
File:floor2sill.png|'''Floor 2 sills + apertures.''' - [[File:floor2sill.fcstd]]
File:doublesinkplumbing.png|'''Double sink plumbing.''' - Gitlab- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/Double_Sink_Dim_Drawing.fcstd]


File:seh2wall17.png|'''Wall Module 17''' SweetHome3D- [[File:seh2_wall_17.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_17.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_17|Build Cheatsheet]]  
File:sinkplumbing.png|'''Sink plumbing.''' - [[File:sinkplumbing.fcstd]]


File:smallwindow3.png|'''Wall Module 18''' SweetHome3D- [[File:seh2_wall_18.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_18.fcstd]] <br/>[[B:uild_Cheatsheet_for_Wall_Module_18|Build Cheatsheet]] 1st story window module.


File:smallwindow3.png|'''Wall Module 19''' SweetHome3D- [[File:seh2_wall_19.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_19.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_19|Build Cheatsheet]] First story window module. Structure same as 18.


File:Seh2wall20.png|'''Wall Module 20''' SweetHome3D- [[File:seh2_wall_20.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_20.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_20|Build Cheatsheet]]
File:toilet2plumbing.png|'''2nd Floor Toilet plumbing.''' - [[File:toilet2plumbing.FCStd]]
File:seh2_wall_21.png|'''Wall Module 21''' SweetHome3D- [[File:seh2_wall_21.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_21.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_21|Build Cheatsheet]]  


File:frenchdoorexteriortrimdetail.png|'''Wall Module 22''' SweetHome3D- [[File:seh2_wall_22.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_22.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_22|Build Cheatsheet]] Note: FreeCAD file is updated, SH3D is older
File:module67beadboard.png|'''Module 67 beadboard''' [[File:module67beadboard.fcstd]]


File:seh2wall23.png|'''Wall Module 23''' FreeCAD- [[File:seh2_wall_23.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_23|Build Cheatsheet]]
</gallery>


===Second Floor Exterior===
File:powercenterextblockinginside.png|'''Power Center Exterior Blocking -''' but looking from the inside. Has stud holes for PV LFMC. [[File:powercenterextblockinginside.fcstd]]


'''See also - Computer Generated 2nd Floor Exterior Wall Modules by Coderjeff'''
File:powercenterintblocking.png|'''Power Center Interior Blocking.''' Has stud holes for PV LFMC.[[File:powercenterintblocking.fcstd]]
Master files for both 8' and 9' walls with detailed parts - [[Coderjeff 2nd Floor Exterior]].


<gallery perrow=6>
File:powercenterextblocking.png|'''Power Center Exterior Blocking.''' Does not have stud holes for PV. [[File:powercenterextblocking.fcstd]]


File:seh2_9ft_short_left_corner.png|'''Wall Module 24''' <br/>FreeCAD- [[File:seh2_wall_24.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_24|Build Cheatsheet]]
File:mainvent.png|'''Main vent.''' Near positionally correct. [[File:Mainvent.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 25''' <br/>FreeCAD- [[File:seh2_wall_25.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_25|Build Cheatsheet]]  
File:heatpumpthru.png|'''Heat pump through-tube geometry.''' [[File:heatpumpthru.fcstd]]


File:Upperdoorupdate.png|'''Wall Module 26 - second story door''' <br/>FreeCAD- [[File:seh2_wall_26.fcstd]] <br/> [[Build_Cheatsheet_for_Wall_Module_26|Build Cheatsheet]]  
File:heatpumpinterface.png|'''Heat pump interface plate.''' Includes tech drawing. [[File:heatpumpinterfaceplate.fcstd]]


File:seh2_9ft_short_right_corner.png|'''Wall Module 27''' <br/>FreeCAD- [[File:seh2_wall_27.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_27|Build Cheatsheet]]  
File:heatpumpdownspout.png|'''Heat pump downspout detail.''' [[File:heatpumpdownspout.fcstd]]


File:seh2_9ft_long_left_corner.png|'''Wall Module 28''' <br/>FreeCAD- [[File:seh2_wall_28.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_28|Build Cheatsheet]]  
File:heatpump24000.png|'''Heat pump mounting for 24000 BTU Heat Pump.''' Also found in [[SH4 Electrical Part Library]]. - [[File:heatpump24000.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 29''' <br/>FreeCAD- [[File:seh2_wall_29.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_29|Build Cheatsheet]]  
File:deck.png|'''Front deck, floating.''' [https://drive.google.com/file/d/1s8XA6LmkRlaGqGlI9IY0wGp79pxVV2Lj/view]. Technical drawing: [[File:deck.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 30''' <br/>FreeCAD- [[File:seh2_wall_30.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_30|Build Cheatsheet]]


File:seh2_9ft_panel.png|'''Wall Module 31''' <br/>FreeCAD- [[File:seh2_wall_31.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_31|Build Cheatsheet]]  
File:retainingwall.png|'''Retaining wall.''' [[File:retainingwall.fcstd]]


File:seh2wall32.png|'''Wall Module 32''' <br/>FreeCAD- [[File:seh2_wall_32.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_32|Build Cheatsheet]]  
File:turningradius.png|'''Walkway + Driveway turning radius''' [[File:turningradius.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 33''' <br/>FreeCAD- [[File:seh2_wall_33.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_33|Build Cheatsheet]]  
File:module4beadboard.png|'''Module 4 beadboard''' [[File:module4beadboard.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 34''' <br/>FreeCAD- [[File:seh2_wall_34.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_34|Build Cheatsheet]]
File:seh2_9ft_long_right_corner.png|'''Wall Module 35''' <br/>FreeCAD- [[File:seh2_wall_35.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_35|Build Cheatsheet]]


File:seh2_9ft_short_left_corner.png|'''Wall Module 36''' <br/>FreeCAD- [[File:seh2_wall_36.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_36|Build Cheatsheet]]  
File:pvdcdiscoblocking.png|'''PV DC Disconnect Blocking''' [[File:pvdcdiscoblocking.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 37''' <br/>FreeCAD- [[File:seh2_wall_37.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_37|Build Cheatsheet]]


File:seh2_9ft_panel.png|'''Wall Module 38''' <br/>FreeCAD- [[File:seh2_wall_38.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_38|Build Cheatsheet]]  
File:sewertap.png|'''Sewer Ta[-''' 4" pipe onto 6" pipe. [[File:sewertap.fcstd]]


File:seh2_9ft_short_right_corner.png|'''Wall Module 39''' <br/>FreeCAD- [[File:seh2_wall_39.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_39|Build Cheatsheet]]


File:seh2_9ft_long_left_corner.png|'''Wall Module 40'''<br/>FreeCAD- [[File:seh2_wall_40.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_40|Build Cheatsheet]]


File:seh2wall41.png|'''Wall Module 41''' <br/>FreeCAD- [[File:seh2_wall_41.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_41|Build Cheatsheet]]  
File:gravelbox.png|'''Gravel box.''' [[File:gravelbox.fcstd]]


File:seh2wall42.png|'''Wall Module 42''' <br/>FreeCAD- [[File:seh2_wall_42.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_42|Build Cheatsheet]]  
File:windowboxes.png|'''Window boxes.''' [[File:windowboxes.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 43''' <br/>FreeCAD- [[File:seh2_wall_43.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_43|Build Cheatsheet]]  
File:windowtrim.png|'''Window trim.''' Next step is to add stained pieces around. [[File:windowtrim.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 44''' <br/>FreeCAD- [[File:seh2_wall_44.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_44|Build Cheatsheet]]
File:wallmodule67.png|'''[[Electrical part library]].'''  
File:seh2wall45.png|'''Wall Module 45''' <br/>FreeCAD- [[File:seh2_wall_45.fcstd]]<br/>  [[Build_Chatsheet_for_Wall_Module_45|Build Cheatsheet]]


File:seh2wall46.png|'''Wall Module 46''' <br/>FreeCAD- [[File:seh2_wall_46.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_46|Build Cheatsheet]]
File:seh2_9ft_long_right_corner.png|'''Wall Module 47'''<br/>FreeCAD- [[File:seh2_wall_47.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_47|Build Cheatsheet]]


</gallery>


===First Floor Interior===
File:waterexpansiontank.png|'''Water expansion tank''' - [[File:waterexpansiontank.fcstd]]


{{Hint|The first floor exterior walls sit on the sill so the interior walls start 1.5" lower.  These panels have been designed to use 106.125" studs (1.5" longer than standard pre-cut studs) so they will be the same height as the exterior walls when they are in place.  The utility channel spacers are also raised 1.5" to be at the same height as in the exterior walls}}


<gallery perrow=6>


File:seh2_9ft_interior.png|'''Full 2x4 interior panel''' FreeCAD Detail- [[File:seh2_9ft_interior.fcstd]]<br/>Modules 58 & 59


File:seh2_9ft_2x6_interior.png|'''Full 2x6 interior panel''' FreeCAD Detail- [[File:seh2_9ft_2x6_interior.fcstd]]<br/>Modules 48 & 49
File:wanxiang.png|'''Wanxiang 230W PV Panels  -28 panel array''' Array, positionally correct X,Y - 1" off on Z. - [[File:wanxiang230.FCStd]]


File:seh2_9ft_2x6_interior.png|'''Wall Module 48''' SweetHome3D- [[File:seh2_wall_48.sh3d.zip]] <br/>[[File:seh2_wall_48.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_48|Build Cheatsheet]]  
File:panelmounting.png|'''Wanxiang 230W PV Panels.''' Single panel. Includes tech drawing of back mount - [[File:panelmounting.FCStd]]


File:seh2_9ft_2x6_interior.png|'''Wall Module 49''' FreeCAD- [[File:seh2_wall_49.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_49|Build Cheatsheet]]


File:seh2_wall_50.png|'''Wall Module 50''' FreeCAD- [[File:seh2_wall_50.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_50|Build Cheatsheet]]  
File:PVpanelmountingcad.png|'''PV Panel mounting CAD.''' Not positionally correct in Z direction, ok in X, Y - [[File:PVpanelmountingcad.FCStd]]


File:seh2wall51.png|'''Wall Module 51-First Floor Bathroom Door''' SweetHome3D- [[File:seh2_wall_51.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_51.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_51|Build Cheatsheet]]


File:seh2wall52.png|'''Wall Module 52-First Floor Bathroom Wall''' SweetHome3D- [[File:seh2_wall_52.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_52.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_52|Build Cheatsheet]]  
File:Powerladderangles.png|'''Power ladder angles.''' [[File:powerladderangles.fcstd]]. Source - [[File:28ladder.FCStd]]


File:laundry.png|'''Wall Module 55 (Laundry)''' <br/>FreeCAD- [[File:Laundry.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_55|Build Cheatsheet]]<br/> modules 53, 54 & 55 combined
File:gravellock.png|'''Gravel lock.''' Merge with main Maysville 2023 file. [[File:gravellock.fcstd]]


File:seh2wall56.png|'''[[Wall Module 56]]'''[https://drive.google.com/file/d/16dmPzyMUUcRUyOfgH4Kv7yQOHTJ2IEDz/view?usp=sharing]<br/>FreeCAD- [[File:seh2_wall_56.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_56|Build Cheatsheet]]
File:trellisbandgeo.png|'''Trellis band geometry.''' - [[File:trellisbandgeo.fcstd]]
File:seh2wall57.png|'''Wall Module 57''' FreeCAD- [[File:seh2_wall_57.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_57|Build Cheatsheet]]
File:seh2_9ft_interior.png|'''Wall Module 58''' FreeCAD- [[File:seh2_wall_58.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_58|Build Cheatsheet]]  


File:seh2_9ft_interior.png|'''Wall Module 59''' FreeCAD- [[File:seh2_wall_59.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_59|Build Cheatsheet]]  
File:fronttrellisassy.png|'''Front Trellis Assembly.''' Includes production drawing.- [[File:fronttrellisassy.fcstd]]


</gallery>
File:trellisinstall.png|'''Front Trellis inatallation geometry.''' - [[File:trellisinstall.fcstd]]


===Second Floor Interior===
File:lefttrellisassy.png|'''Left Trellis Assembly.''' - [[File:lefttrellisassy.fcstd]]


<gallery perrow=6>
File:vinylaiding.png|'''Vinyl siding.''' - [[File:vinylsiding.fcstd]]
File:2ndfloorutechan.png|'''Second floor utility channel.''' FreeCAD Detail- [[File:2ndfloorutechan.fcstd]]


File:seh2_bathroomwalls.png|'''SEH 2 Bathroom Walls.''' FreeCAD Detail- [[File:seh2_bathroomwalls.fcstd]]
File:integratedwindowtrim.png|'''Window trim integrated with J-Channel.''' For 2nd floor windows. - [https://drive.google.com/u/1/uc?id=1OwYPNDRCBJZCHfnyurYE55M9WS42CH9s&export=download]. Each layer is in separate files: [[File:topwindowinnertrimframe.fcstd]]  


File:seh2_8ft_interior.png|'''Full interior panel''' FreeCAD Detail- [[File:seh2_8ft_interior.fcstd]]
File:windowboxes.png|'''Trim with window boxes.''' - [[File:windowboxes.fcstd]]


File:seh2_8ft_interior_door.png|'''Interior door''' FreeCAD Detail- [[File:seh2_8ft_interior_door.fcstd]]<br/> (38x83 rough opening)
File:correctiontrim.png|'''French door plumb correction trim.''' - [https://drive.google.com/file/d/17FYxVrwIPDoYF_tbtTAPnVDkDhFQmUP4/view?ts=63f415d8]


File:seh2wall60.png|'''Wall Module 60''' SweetHome3D-[[File:seh2_wall_60.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_60.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_60|Build Cheatsheet]]  
File:foundationflashing.png|'''Foundation flashing geometry.''' - [[File:foundationflashing.FCStd]]


File:seh2wall61.png|'''Wall Module 61''' SweetHome3D-[[File:seh2_wall_61.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_61.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_61|Build Cheatsheet]]
File:railingprofile.png|'''Railing Profile.''' [[File:railingprofile.fcstd]].  


File:seh2wall62.png|'''[[Wall Module 62]]''' SweetHome3D-[[File:seh2_wall_62.sh3d.zip]]<br/> [[File:seh2_wall_62.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_62|Build Cheatsheet]]
File:garageheader.png|'''Garage Header.''' [[File:garageheader.fcstd]].  
File:seh2wall63-4.png|'''Wall Module 63''' SweetHome3D-[[File:seh2_wall_63.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_63.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_63|Build Cheatsheet]]


File:seh2wall64.png|'''Wall Module 64''' SweetHome3D-[[File:seh2_wall_64.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_64.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_64|Build Cheatsheet]]
File:exteriortrim.png|'''Exterior trim.''' [[File:exteriortrim.fcstd]].  


File:seh2_8ft_interior_door.png|'''Wall Module 65''' SweetHome3D-[[File:seh2_wall_65.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_65.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_65|Build Cheatsheet]]
File:hurricanetiesongarage.png|'''Hurricane ties on garage.''' Detail for 2 next to each other. See [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g1c4d1fcf8a6_0_95 work doc]. [[File:hurricanetiesongarage.fcstd]].  
File:seh2wall66.png|'''Wall Module 66''' SweetHome3D-[[File:seh2_wall_66.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_66.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_66|Build Cheatsheet]]
File:seh2_8ft_interior.png|'''Wall Module 67''' SweetHome3D-[[File:seh2_wall_67.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_67.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_67|Build Cheatsheet]]


File:Seh2wall68.png|'''Wall Module 68''' SweetHome3D- [[File:seh2_wall_68.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_68.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_68|Build Cheatsheet]]<br/>[https://github.com/cryptogoth/freecad-python/blob/main/Panel-Workbench/PanelsGui.py#L80 Python Workbench Code]
File:livingroomcircuit.png|'''Living room circuit.''' [[File:livingroomcircuit.fcstd]].  


File:seh2wall69.png|'''Wall Module 69''' SweetHome3D- [[File:seh2_wall_69.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_69.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_69|Build Cheatsheet]]
File:workginlandingdetail.png|'''Working landing utility channel detail.''' [[File:workginlandingdetail.fcstd]].  
</gallery>


===Second Story Platform===
File:frontdoorwithchannel.png|'''Front door with utility channel.''' Modified for 5" trim prototyped on Seed Eco-Home 1.  [[File:frontdoorwithchannel.fcstd]].


[[File:secondstoryfloor4.png|100px]][[File:secondstoryfloor3.png|100px]][[File:secondstoryfloor2.png|100px]][[File:secondstoryfloor.png|100px]]
File:staires.png|'''Stairs.''' [[File:seh2stairs.fcstd]]. See [https://docs.google.com/presentation/d/1N1lS8RBMy0Y0JnR_h1tz23CYFoR5zespNG4T5m4nnZE/edit#slide=id.gd0d0ba6c1a_0_0] for Stair Design Guide - with stringers.


<gallery>
File:seh4landing.png|'''Landing.''' [[File:seh4landing.fcstd]]. SEH 2 version at [[File:Landing.fcstd]]


File:secondstoryfloor3.png|'''[[Second Story Floor Platform]]''' - FreeCAD - [[File:secondstoryfloor.fcstd]].
File:verticalcrosssection.png|'''Vertical Cross Section.''' FreeCAD- [[File:verticalcrosssection.fcstd]]


</gallery>
File:pvracking.png|PV rack. FreeCAD- [[File:pvrack.fcstd]]


===Roof Assembly===
File:toproofband.png|Top roof band. FreeCAD- [[File:toproofband.fcstd]]


<gallery>
File:EPDM+termination.png|EPDM roof + termination bar. FreeCAD- [[File:epdm+term.fcstd]]


File:rigidinsulpattern.png|'''Insulation pattern.''' Not rotated or positioned. - [[File:roofinsulpattern.fcstd]].
File:pvledgerbrackets.png|PV ledgerbrackets. FreeCAD- [[File:pvledgerbrackets.fcstd]]  


File:check.png|'''Second Story Roof Assembly.''' Includes joists only. - [[File:SecondStoryRoof.fcstd]].
File:tophouseOSB.png|'''Top of the house OSB.''' FreeCAD- [[File:tophouseOSB.fcstd]]  


File:roofjoists.png|'''Roof Joists.''' - FreeCAD - [[File:roofjoists.fcstd]].
File:trellisv2.png|Second iteration trellis. Positioned for master file. <br/>FreeCAD- [[File:trellisv2.fcstd]]  


File:epdm.png|'''EPDM.''' - FreeCAD - [[File:epdm.fcstd]].
File:carportfooterassy.png|Car port footer assembly. 22" and 28". Dug with 22" auger. <br/>FreeCAD- [[File:carportfooterassy.fcstd]]  


File:roofangle.png|'''Roof angle for roof is 1.2 Degrees.''' - FreeCAD - [[File:Roofangle.fcstd]].
File:carportfooter.png|Car port footer. 22" and 28". Dug with 22" auger. <br/>FreeCAD- [[File:carportfooter.fcstd]]  


File:RoofRiserAssembly.png|'''Roof Riser Assembly''' - FreeCAD - [[File:RoofRiserAssembly.fcstd]].
File:2ndflbackwalldete.png|Second floor back wall detail. 9.5" height of cover. <br/>FreeCAD- [[File:2ndflbackwalldete.fcstd]]  


File:RoofInsulationBox.png|"Roof Insulation Box. "- FreeCAD - [[File:RoofInsulationBox.FCStd]].
File:2ndfloorutechan.png|'''Second floor utility channel.''' Still 10" cover, may want 9.5"- [[File:2ndfloorutechan.fcstd]]


File:RoofInsulationBox_0.5inch.png|"Roof Insulation Box - 0.5-inch. "- FreeCAD - [[File:RoofInsulationBox_0.5inch.FCStd]].
File:Blockignstetch.png|'''Floor joist blocking.''' With sketch. [[File:blockingsketch.fcstd]]


File:Roof_OSB.png|"Roof OSB"- FreeCAD - [[File:Roof_OSB.FCStd]].
File:Blockingcover.png|'''Floor joist cover.''' With sketch. [[File:blockingcover.fcstd]]


File:SecondStoryRoofComplete.png|"Second Story Roof Assembly"- FreeCAD - [[File:SecondStoryRoofComplete.FCStd]].
File:blockingdetail2.png|First Floor Ceiling Detail <br/>FreeCAD- [[File:blockingdetail.fcstd]]  


</gallery>
</gallery>


===Carport===
=Second Floor Interior=
See [[Seed Eco-Home 2 Carport]]
<gallery perrow=6>


File:Carportassembly.png|'''Carport assembly.''' - FreeCAD -[[File:Carportassembly.fcstd]]


File:carportposts.png|'''Carport posts.''' - FreeCAD -[[File:Carport_posts.fcstd]]
<gallery perrow=6>
File:secondfloorinterior.png|'''Second floor interior walls.''' Not. [[File:secondfloorinterior.FCStd]].


File:carportheight.png|'''Carport height.''' - FreeCAD -[[File:Carport_height.fcstd]]
File:carportdeck.png|'''Carport Deck.''' - FreeCAD -[[File:Carport_deck.fcstd]]


</gallery>
</gallery>


===Plumbing Rough-In===
=First Floor Interior=


Note: due to local variations - the actual CAD must reconcile against materials used ([https://photos.app.goo.gl/6Mu2gsXhC9jhsi82A]) and the data collection from annotated PVC pictures at [https://photos.app.goo.gl/8Jqt4scFkxHnM8d59]. This is proper CAD-BOM-Reality reconciliation required for a full digital model.
{{Hint|The first floor exterior walls sit on the sill so the interior walls start 1.5" lower. These panels have been designed to use 106.125" studs (1.5" longer than standard pre-cut studs) so they will be the same height as the exterior walls when they are in place. The utility channel spacers are also raised 1.5" to be at the same height as in the exterior walls}}
 
[[File:secondfloortoilet.png|100px]][[File:bathroomonly2.png|100px]][[File:bathroomonly.png|100px]][[File:foundationonly.png|100px]][[File:wallstarting.png|100px]][[File:finishingplumbing.png|100px]][[File:3sweepelbow.png|100px]][[File:continuinghouse.png|100px]][[File:grading.png|100px]][[File:sinkdrain.png|100px]][[File:tuscany.png|100px]][[File:toilet.png|100px]][[File:drain.png|100px]][[File:cuttrapbottom.png|100px]][[File:cuttraptop.png|100px]][[File:15trap.png|100px]][[File:house3.png|100px]][[File:house2.png|100px]][[File:house.png|100px]][[File:bathroomonslab.png|100px]][[File:drainkit4.png|100px]][[File:drainkit3.png|100px]][[File:drainkit2.png|100px]][[File:drainkit.png|100px]][[File:15elbow.png|100px]]


<gallery perrow=6>
<gallery perrow=6>


File:bathroomonly.png|'''Plumbing on slab.''' This can be merged with foundation. FreeCAD -[[File:Plumbing_on_slab.fcstd]]
File:laundry.png|'''Wall Module 55 (Laundry)'''. FreeCAD- [[File:Laundry.fcstd]]. Modules 53, 54 & 55 combined
</gallery>


File:secondfloortoilet.png|'''Second Floor Toilet Beginning.'''. FreeCAD -[[File:secondfloortoilet.fcstd]]
=Build Cheatsheets=
{{Hint|Drawing Dimensioning Workbench is no longer maintained/updated by FreeCAD, though it is still fine to use. The supported workbench is called TechDraw. <br/> [https://wiki.freecad.org/Drawing_Dimensioning_Addon FreeCAD Wiki]}}
Protocol: Note that only single objects can be used in dimensional drawings with the Drawing Dimensioning workbench. For complex assemblies, simply collapse into simple copies of compounds - or compound STEP exports (to turn them into simple solids). As such - take master files - take the necessary selection - and turn into one dumb object. Then you can get nice dimensions. Save the file with teh pages included - pages with dimensions show up in another tab, though.


File:3sweepelbow.png |'''3" sweep elbow for toilet.''' - FreeCAD -[[File:3sweepelbow.fcstd]]


File:grading.png |'''House drainage slope.''' Codes say 6" over 10'. - FreeCAD -[[File:grading.fcstd]]
==Whole House Views==


File:tuscany.png |'''Tuscany toilet.''' - FreeCAD -[[File:tuscany.fcstd]]
(moved 1000 sf version to Savannah SH 5)
<gallery perrow=6>
File:sh4sillplate.png|'''Sill plate and top plate.''' SH 4 sill plate and top plate are identical. [[File:sh4sillplate.fcstd]]. Garage sill plate - [[file:garagesillplate.fcstd]]


File:cuttraptop.png |'''Cut trap bottom, 1.5".''' - FreeCAD -[[File:cuutrapbottom.fcstd]]


File:cuttrapbottom.png |'''Cut trap top, 1.5".''' - FreeCAD -[[File:cuutraptop.fcstd]]


File:15trap.png |'''1.5" PVC Trap.''' - FreeCAD -[[File:15trap.fcstd]]
File:SEH4FirstFloorInteriorModulesLayout.png|'''Top View of First Floor Interior Modules Layout''' -  
</gallery>


File:bathroomonslab.png |'''Bathroom on slab.''' - FreeCAD -[[File:bathroomonslab.fcstd]]
==Exterior Walls==
{{Hint|Use PDF Files, not PNG Thumbnails for module drawings. Verify with crew leader that the drawing is correct before assembling}}
<gallery perrow=6>
File:exteriorwall1.png|'''Exterior Wall 1.''' Build cheatsheet.  [[File:exteriorwall1.FCStd]] '''[[File:SEH4exteriorwall1.pdf]]'''.
File:check.png|'''Exterior Wall 2.''' Build cheatsheet.  [[File:SEH4exteriorwall2.pdf]].
File:x.png|'''Exterior Wall 3.''' Build cheatsheet.  [[File:SEH4exteriorwall3.pdf]].
File:check.png|'''Exterior Wall 4.''' Build cheatsheet.  [[File:SEH4exteriorwall4.pdf]].
File:check.png|'''Exterior Wall 5.''' Build cheatsheet.  [[File:SEH4exteriorwall5.pdf]].
File:exteriorwall6.png|'''Exterior Wall 6.''' Build cheatsheet.  [[File:exteriorwall6.FCStd]].
File:check.png|'''Exterior Wall 7.''' Build cheatsheet (same as 11).  [[File:seh4exteriorwall11.pdf]].
File:check.png|'''Exterior Wall 8.''' Build cheatsheet (same as 11).  [[File:seh4exteriorwall11.pdf]].
File:exteriorwall9.png|'''Exterior Wall 9. Single Door''' Build cheatsheet.  [[File:seh4exteriorwall9.pdf]].
File:check.png|'''Exterior Wall 10.''' Build cheatsheet.(same as 11). [[File:seh4exteriorwall11.pdf]]..
File:exteriorwall11.png|'''Exterior Wall 11.''' Build cheatsheet.  [[File:seh4exteriorwall11.pdf]].
File:check.png|'''Exterior Wall 12.''' Build cheatsheet.  [[File:seh4exteriorwall12.pdf]].
File:exteriorwall13.png|'''Exterior Wall 13.''' Build cheatsheet.  [[File:exteriorwall13.FCStd]].
File:check.png|'''Exterior Wall 14.''' Build cheatsheet. (same as 11).  [[File:seh4exteriorwall11.pdf]].
File:exteriorwall15.png|'''Exterior Wall 15.''' Build cheatsheet.  [[File:SEH4Exteriorwall15.pdf]].
File:exteriorwall16.png|'''Exterior Wall 16.''' Build cheatsheet.  [[File:SEH4Exteriorwall1.pdf]].
File:Exteriorwall17.png|'''Exterior Wall 17.''' Build cheatsheet.  [[File:SEH4Exteriorwall17.pdf]].
File:exteriorwall18.png|'''Exterior Wall 18.''' Build cheatsheet.  [[File:exteriorwall18.FCStd]].
File:exteriorwall19.png|'''Exterior Wall 19.''' Build cheatsheet.  [[File:exteriorwall19.FCStd]].
File:exteriorwall20.png|'''Exterior Wall 20.''' Build cheatsheet.  [[File:SEH4Exteriorwall20.pdf]].
File:exteriorwall21.png|'''Exterior Wall 21.''' Build cheatsheet.  [[File:SEH4exteriorwall21.pdf]].
File:exteriorwall22.png|'''Exterior Wall 22. Double Door''' Build cheatsheet.  [[File:seh4exteriorwall22.pdf]].
File:exteriorwall23.png|'''Exterior Wall 23.''' Build cheatsheet.  [[File:exteriorwall23.pdf]].
File:exteriorwall24.png|'''Exterior Wall 24.''' Build cheatsheet.  [[File:Exteriorwall24.FCStd]].'''[[File:SEH4Exteriorwall24.pdf]]'''
File:exteriorwall25.png|'''Exterior Wall 25.''' Build cheatsheet.  [[File:Exteriorwall25.FCStd]].'''[[File:SEH4Exteriorwall25.pdf]]'''
File:exteriorwall26.png|'''Exterior Wall 26.''' Build cheatsheet.  [[File:Exteriorwall26.FCStd]].'''[[File:SEH4Exteriorwall26.pdf]]'''
File:exteriorwall27.png|'''Exterior Wall 27.''' Build cheatsheet.  [[File:Exteriorwall27.FCStd]].'''[[File:SEH4Exteriorwall27.pdf]]'''
File:exteriorwall28.png|'''Exterior Wall 28.''' Build cheatsheet.  [[File:Exteriorwall28.FCStd]].'''[[File:SEH4Exteriorwall28.pdf]]'''
File:exteriorwall29.png|'''Exterior Wall 29.''' Build cheatsheet.  [[File:Exteriorwall29.FCStd]].'''[[File:SEH4Exteriorwall29.pdf]]'''
File:exteriorwall30.png|'''Exterior Wall 30.''' Build cheatsheet.  [[File:Exteriorwall30.FCStd]].'''[[File:SEH4Exteriorwall30.pdf]]'''
File:exteriorwall31.png|'''Exterior Wall 31.''' Build cheatsheet.  [[File:Exteriorwall31.FCStd]].'''[[File:SEH4Exteriorwall31.pdf]]'''
File:exteriorwall32.png|'''Exterior Wall 32.''' Build cheatsheet.  [[File:Exteriorwall32.FCStd]].'''[[File:SEH4Exteriorwall32.pdf]]'''
File:exteriorwall33.png|'''Exterior Wall 33.''' Build cheatsheet.  [[File:Exteriorwall33.FCStd]].'''[[File:SEH4Exteriorwall33.pdf]]'''
File:exteriorwall34.png|'''Exterior Wall 34.''' Build cheatsheet.  [[File:Exteriorwall34.FCStd]].'''[[File:SEH4Exteriorwall34.pdf]]'''
File:exteriorwall35.png|'''Exterior Wall 35.''' Build cheatsheet.  [[File:Exteriorwall35.FCStd]].'''[[File:SEH4Exteriorwall35.pdf]]'''
File:exteriorwall36.png|'''Exterior Wall 36.''' Build cheatsheet.  [[File:Exteriorwall36.FCStd]].'''[[File:SEH4Exteriorwall36.pdf]]'''


File:drainkit4.png |'''Tub drain kit''' - FreeCAD -[[File:tubdrainkit.fcstd]]
File:exteriorwall38.png|'''Exterior Wall 38.''' Build cheatsheet.  [[File:Exteriorwall38.FCStd]].'''[[File:SEH4Exteriorwall38.pdf]]'''
 
File:exteriorwall39.png|'''Exterior Wall 39.''' Build cheatsheet.  [[File:Exteriorwall39.FCStd]].'''[[File:SEH4Exteriorwall39.pdf]]'''
File:15elbow.png |'''1.5" elbow''' - FreeCAD -[[File:15elbow.fcstd]]
File:exteriorwall40.png|'''Exterior Wall 40.''' Build cheatsheet.  [[File:Exteriorwall40.FCStd]].'''[[File:SEH4Exteriorwall40.pdf]]'''
File:exteriorwall41.png|'''Exterior Wall 41.''' Build cheatsheet.  [[File:Exteriorwall41.FCStd]].'''[[File:SEH4Exteriorwall41.pdf]]'''
File:exteriorwall42.png|'''Exterior Wall 42.''' Build cheatsheet.  [[File:Exteriorwall42.FCStd]].'''[[File:SEH4Exteriorwall42.pdf]]'''
File:exteriorwall43.png|'''Exterior Wall 43.''' Build cheatsheet.  [[File:Exteriorwall43.FCStd]].'''[[File:SEH4Exteriorwall43.pdf]]'''
File:exteriorwall44.png|'''Exterior Wall 44.''' Build cheatsheet.  [[File:Exteriorwall44.FCStd]].'''[[File:SEH4Exteriorwall44.pdf]]'''
File:exteriorwall45.png|'''Exterior Wall 45.''' Build cheatsheet.  [[File:Exteriorwall45.FCStd]].'''[[File:SEH4Exteriorwall45.pdf]]'''
File:exteriorwall46.png|'''Exterior Wall 46.''' Build cheatsheet.  [[File:Exteriorwall46.FCStd]].'''[[File:SEH4Exteriorwall46.pdf]]'''
File:exteriorwall47.png|'''Exterior Wall 47.''' Build cheatsheet.  [[File:Exteriorwall47.FCStd]].'''[[File:SEH4Exteriorwall47.pdf]]'''
</gallery>
</gallery>


===Plumbing Final===
==First Floor Interior==
'''See more at [[SEH 2 KItchen and Bathroom Part Library]] - latest work from March 2022'''
 
[[File:plumbingfinal.png|200px]]


<gallery perrow=6>
<gallery perrow=6>


File:finishplumbing.png |'''2 Story Plumbing.''' From 2021 - FreeCAD -[[File:2storyplumbing.fcstd]]
File:foundationcheatsheet.png|'''Foundation cheatsheet.''' Extracted from electrtical_68 file -[[File:foundationcheatsheet.FCStd]].
File:interiorwall1.png|{{x}}'''Interior Wall 1.''' Naming convention: I1 for Interior 1. Bath Tub 1 wall. Extracted from plumbing_32 file. - [[File:interiorwall1.FCStd]].
File:interiorwall2.png|'''Interior Wall 2.''' Next to tub. Extracted from plumbing_32 file. - [[File:interiorwall2.FCStd]].
File:interiorwall3.png|'''Interior Wall 3 - thin.'''Extracted from electrical_68 file and modified. - [[File:interiorwall3.FCStd]].
File:interiorwall4.png|'''Interior Wall 4 - bath door.''' And 6 is small module on top. Extracted from electrical_69 file and modified. - [[File:interiorwall4.FCStd]].
File:interiorwall5.png|'''Interior Wall 5 - behind washer.''' And 7 is small module on top - [[File:interiorwall5.FCStd]].
File:interiorwall11.png|'''Interior Wall 11 - Kitchen Corner''' PDF Cheatsheet - [[File:seh4interiorwall11cheatsheet.pdf]].
File:interiorwall12.png|'''Interior Wall 12 - Kitchen middle.''' PDF Cheatsheet - [[File:seh4interiorwall12.pdf]].
File:check.png|'''Interior Wall 13 - .''' - [[File:seh4interiorwall13.pdf]].
File:interiorwall16.png|'''Interior Wall 16 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall16.FCStd]].
File:interiorwall17.png|'''Interior Wall 17 and 18. Laundry closet wall.''' - [[File:interiorwall17.FCStd]].
File:interiorwall19.png|'''Interior Wall 19. Laundry closet cap.''' - [[File:interiorwall19.FCStd]].
File:interiorwall20.png|'''Interior Wall 20 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall20.FCStd]].
File:interiorwall21.png|'''Interior Wall 21 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall21.FCStd]].
File:interiorwall22.png|'''Interior Wall 22 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall22.FCStd]].
File:interiorwall23.png|'''Interior Wall 23 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall23.FCStd]].
File:interiorwall24.png|'''Interior Wall 24 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall24.FCStd]].
File:ventfanlocation.png|'''Vent Fan Location.''' - [[File:ventfanlocation.FCStd]].
</gallery>
</gallery>


===Electrical===
==Second Floor Interior==
(8' version is at [[Seed_Home_v2_3D_CAD#Build_Cheatsheets]])
<gallery perrow=6>


See [[SEH 2 Electrical Design]] for files from May 2022.
File:Standardwall.png|'''Standard interior wall.'''  [[File:standardinteriorwall.FCStd]].


==BOM==
File:walli8_10.png|'''Interior walls 8-10.''' 2nd floor bathroom. - [[File:walli8_10.FCStd]].
*4x3 closet bend is recommended [https://terrylove.com/forums/index.php?threads/4x3-inch-closet-bend-or-3-inch-closet-bend.2826/] - so get one at [https://www.menards.com/main/plumbing/rough-plumbing/pipe-tubing-hoses-fittings-accessories/fittings/pvc-fittings/pvc-dwv-fittings/nibco-reg-4x3-closet-elbow-pvc-dwv/p-1444449182622-c-9383.htm]


=Catarina's Source Google Drive, Sweet Home 3D Files=
</gallery>


*Laundry module - [https://drive.google.com/file/d/1zjWbmlwpjXy4DUW1xlzSzDnDrqDglsUs/view?usp=sharing]
=First Floor Exterior=
*Drive, OBI Models - [https://drive.google.com/drive/folders/0B0NG-lv1ELQvdE9xSGZEeWR3Mm8]
**'''CAD, Rosebud, Working Model as of 5/14/21''' [https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view?usp=sharing]
**'''CAD, Supporting Rosebud Model Files''' - [https://drive.google.com/drive/folders/1ELOrXeIenMNjfYwr6g5HUqoNjGqA38DF]
*Building Book - [Technical designs are found in the Building Book - [https://drive.google.com/drive/folders/1SZrTCkX9S_L8JSD_Dq_xeLDM53MP2vZq]
*Shower drain kit - dimensions - [https://images.homedepot-static.com/catalog/pdfImages/cd/cd10c1ce-fd8e-4efc-8415-60dc104f5090.pdf]


'''Visual History:'''
<gallery perrow=6>


[[File:staironly.png|100px]][[File:floorandroof.png|100px]][[File:stairs2.png|100px]][[File:stairs.png|100px]][[File:staircase.png|100px]][[File:rooflayers.png|100px]]
File:positionallycorrectmod1.png|'''Wall Module 1''' SweetHome3D- [[File:seh2wall1.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_1.fcstd]]<br/>[[Build Cheatsheet for Wall Module 1|Build Cheatsheet]]  


'''Gallery:'''
File:seh2wall2.png|'''Wall Module 2''' SweetHome3D- [[File:seh2wall2.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_2.fcstd]]<br/>[[Build Cheatsheet for Wall Module 2|Build Cheatsheet]]


<gallery perrow=6>
File:seh2wall3rework4.png|'''Wall Module 3''' SweetHome3D- [[File:seh2_wall_3.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_3.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_3|Build Cheatsheet]]


File:staironly.png|'''Stairs only, 1/10 scale.''' - FreeCAD - [[File:staironly.fcstd]].
File:seh2wall4freecad.png|'''Wall Module 4''' SweetHome3D- [[File:seh2_wall_4.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_4.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_4|Build Cheatsheet]]


File:rooflayers.png|'''Roof layers.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].
File:seh2wall5.png|'''Wall Module 5''' SweetHome3D- [[File:seh2_wall_5.sh3d.zip]]<br/> [[Build_Cheatsheet_for_Wall_Module_5|Build Cheatsheet]]<br/> FreeCAD- [[File:seh2_wall_5.fcstd]] -  Same as Wall Module 17 (opposite long side left corner)


File:staircase.png|'''Staircase. Technical detail.''' - SweetHome3D -[https://drive.google.com/file/d/1t9PQIM0JRXRPsQ6aqhsMETB53VRYnqgL/view?usp=sharing].
File:seh2wall6.png|'''Wall Module 6''' SweetHome3D- [[File:seh2_wall_6.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_6.fcstd]] <br/>


File:stairs.png|'''Stairs. Early concept detail.''' - SweetHome3D -[https://drive.google.com/file/d/1HFNCDa2t4rpEKunZowZ8d9cRtb9EF2li/view?usp=sharing].
File:seh2wall7.png|'''Wall Module 7''' SweetHome3D- [[File:seh2_wall_7.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_7.fcstd]]<br/>


File:stairs2.png|'''Stairs. Correct for Aspen.''' - SweetHome3D -[https://drive.google.com/file/d/1-X9sJiHt2KS7ZrOPAeNj0VC2UQlKELNT/view?usp=sharing].  
File:adjustmentmodule8.png|'''Wall Module 8''' SweetHome3D- [[File:seh2_wall_8.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_8.fcstd]]<br/>  Adjustment module.


File:floorandroof.png|'''Technical of floor and roof.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].
File:seh2wall9.png|'''Wall Module 9''' SweetHome3D- [[File:seh2_wall_9.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_9.fcstd]] <br/>


</gallery>
File:seh2_wall_10.png|'''Wall Module 10''' SweetHome3D- [[File:seh2_wall_10.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_10.fcstd]] <br/>


=Concept Modules=
File:Seh2 wall 11.png|'''Wall Module 11''' SweetHome3D- [[File:seh2_wall_11.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_11.fcstd]]<br/>


==Part Library==
File:seh2wall12.png|'''Wall Module 12''' SweetHome3D- [[File:seh2_wall_12.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_12.fcstd]]<br/> . Structure same as Module 23.


'''Visual History:'''  
File:seh2wall1freecad.png|'''Wall Module 13''' SweetHome3D- [[File:seh2_wall_13.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_13.fcstd]] <br/> Same as Wall 1 structure. But - Wall 1 has a hole for electrical.


File:seh2wall14.png|'''Wall Module 14''' SweetHome3D- [[File:seh2_wall_14.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_14.fcstd]]<br/>


[[File:2ndfloorwithbands.png|100px]][[File:trellisonly.png|100px]][[File:bandconcept.png|100px]][[File:overhangrework2.png|100px]][[File:overhangrework.png|100px]][[File:overhang.png|100px]][[File:2ndfloorwithband.png|100px]][[File:firstfloorconcept.png|100px]][[File:secondfloorconcept.png|100px]]
File:seh2wall15.png|'''Wall Module 15''' SweetHome3D- [[File:seh2_wall_15.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_15.FCStd]]<br/>


File:Seh2wall16.png|'''Wall Module 16''' SweetHome3D- [[File:seh2_wall_16.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_16.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_16|Build Cheatsheet]] Same structure as Module 4.


'''Gallery:'''
File:seh2wall17.png|'''Wall Module 17''' SweetHome3D- [[File:seh2_wall_17.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_17.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_17|Build Cheatsheet]]


<gallery perrow=6>
File:smallwindow3.png|'''Wall Module 18''' SweetHome3D- [[File:seh2_wall_18.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_18.fcstd]] <br/>[[B:uild_Cheatsheet_for_Wall_Module_18|Build Cheatsheet]] 1st story window module.
File:2ndfloorwithbands.png|'''Second floor concept with bands.''' - FreeCAD -[[File:2ndfloorwithbands.fcstd]].  


File:overhangrework2.png|'''Overhang band - rework from rough underlying shape..''' - FreeCAD -[[File:overhangrework.fcstd]].  
File:smallwindow3.png|'''Wall Module 19''' SweetHome3D- [[File:seh2_wall_19.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_19.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_19|Build Cheatsheet]] First story window module. Structure same as 18.


File:trellisonly.png|'''Overhang band - detail, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:trellisonly.fcstd]].
File:Seh2wall20.png|'''Wall Module 20''' SweetHome3D- [[File:seh2_wall_20.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_20.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_20|Build Cheatsheet]]
 
File:2ndfloorwithband.png|'''Second floor with band concept, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[[File:2ndfloorwithband.fcstd]].
File:seh2_wall_21.png|'''Wall Module 21''' SweetHome3D- [[File:seh2_wall_21.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_21.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_21|Build Cheatsheet]]


File:firstfloorconcept.png|'''First floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/first_floor.fcstd].
File:frenchdoorexteriortrimdetail.png|'''Wall Module 22''' SweetHome3D- [[File:seh2_wall_22.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_22.fcstd]]<br/>  Note: FreeCAD file is updated, SH3D is older


File:secondfloorconcept.png|'''Second floor of Rosebud, obj export from SweetHome3D at 1/10 scale.''' - FreeCAD -[https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/2nd.fcstd].
File:seh2wall23.png|'''Wall Module 23''' FreeCAD- [[File:seh2_wall_23.fcstd]]<br/>


</gallery>
</gallery>


=Technical Modules=
=Second Floor Exterior - 9' Version=
==Stair Design==
#Please download SweetHome3D to view this file - https://drive.google.com/file/d/1X7H-kKLtFZrs0y3Qwq7GYdgxnL4wskm5/view?usp=sharing
#Determine the correct stair height, and then the landing is like in this concept model - https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view
#Then do the staircase in FreeCAD, which I started here - https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules
 
[[File:stairstringer2.png|100px]][[File:stairstringer.png|100px]]
 
'''Gallery:'''


'''See also - Computer Generated 2nd Floor Exterior Wall Modules by Coderjeff'''
Master files for both 8' and 9' walls with detailed parts - [[Coderjeff 2nd Floor Exterior]].
<gallery perrow=6>
<gallery perrow=6>


File:stairstringer2.png|'''Stair stringer with steps, no nosing.''' Generate technical drawing with TechDraw. FreeCAD -[[File:stairstringer.fcstd]].
File:seh2_9ft_short_left_corner.png|'''Wall Module 24''' <br/>FreeCAD- [[File:seh2_wall_24.fcstd]]<br/> 


</gallery>
File:seh2_9ft_panel.png|'''Wall Module 25''' <br/>FreeCAD- [[File:seh2_wall_25.fcstd]]<br/> 


File:Upperdoorupdate.png|'''Wall Module 26 - second story door''' <br/>FreeCAD- [[File:seh2_wall_26.fcstd]] <br/>


File:seh2_9ft_short_right_corner.png|'''Wall Module 27''' <br/>FreeCAD- [[File:seh2_wall_27.fcstd]]<br/> 


Also - See [[Stairs]]
File:seh2_9ft_long_left_corner.png|'''Wall Module 28''' <br/>FreeCAD- [[File:seh2_wall_28.fcstd]]<br/> 


[[File:stairs_example.png|100px]]
File:seh2_9ft_panel.png|'''Wall Module 29''' <br/>FreeCAD- [[File:seh2_wall_29.fcstd]]<br/> 


=House Build=
File:seh2_9ft_panel.png|'''Wall Module 30''' <br/>FreeCAD- [[File:seh2_wall_30.fcstd]]<br/> 


Starting with foundation, to bathroom, walls.
File:seh2_9ft_panel.png|'''Wall Module 31''' <br/>FreeCAD- [[File:seh2_wall_31.fcstd]]<br/>  File:seh2wall32.png|'''Wall Module 32''' <br/>FreeCAD- [[File:seh2_wall_32.fcstd]]<br/> 


[[File:rosebudplumbing2.png|100px]][[File:addedbathtofound.png|100px]][[File:addedholetofound.png|100px]][[File:sillplate7.png|100px]][[File:mudsillanchor2.png|100px]][[File:mudsillanchor.png|100px]][[File:sillplate6.png|100px]][[File:sillplate5.png|100px]][[File:sillplate4.png|100px]][[File:sillplate3.png|100px]][[File:sillplate.png|100px]][[File:2inchinsulation.png|100px]][[File:Baseslab.png|100px]]
File:seh2_9ft_panel.png|'''Wall Module 33''' <br/>FreeCAD- [[File:seh2_wall_33.fcstd]]<br/> 


<gallery perrow=6>
File:seh2_9ft_panel.png|'''Wall Module 34''' <br/>FreeCAD- [[File:seh2_wall_34.fcstd]]<br/> 
File:seh2_9ft_long_right_corner.png|'''Wall Module 35''' <br/>FreeCAD- [[File:seh2_wall_35.fcstd]]<br/> 


File:rosebudplumbing.png|'''Rosebud plumbing.''' - FreeCAD - [[File:rosebudplumbing.fcstd]]
File:seh2_9ft_short_left_corner.png|'''Wall Module 36''' <br/>FreeCAD- [[File:seh2_wall_36.fcstd]]<br/> 
File:sillplate7.png|'''Foundation only.''' Note this file has entire sill detail including cement board, flexible vinyl flashing, sill gasket, and ramset boards under doors. Next file continues with the plumbing detail. FreeCAD -[[File:foundationonly.fcstd]]
File:mudsillanchor2.png|'''Mudsill anchor.''' - FreeCAD -[[File:mudsillanchor.fcstd]]


</gallery>
File:seh2_9ft_panel.png|'''Wall Module 37''' <br/>FreeCAD- [[File:seh2_wall_37.fcstd]]<br/> 


=Top Plate, Ceiling, Roof=
File:seh2_9ft_panel.png|'''Wall Module 38''' <br/>FreeCAD- [[File:seh2_wall_38.fcstd]]<br/> 


<gallery perrow=6>
File:seh2_9ft_short_right_corner.png|'''Wall Module 39''' <br/>FreeCAD- [[File:seh2_wall_39.fcstd]]<br/> 


File:roof.png |'''Rosebud roof.''' All individual parts. Correct shape, stair location not present. - FreeCAD -[[File:roof.FCStd]].
File:seh2_9ft_long_left_corner.png|'''Wall Module 40'''<br/>FreeCAD- [[File:seh2_wall_40.fcstd]]<br/> 


File:ceiling.png|'''Rosebud ceiling.''' - FreeCAD -[[File:ceiling.FCStd]]. '''Deprecated. Newer above.'''
File:seh2wall41.png|'''Wall Module 41''' <br/>FreeCAD- [[File:seh2_wall_41.fcstd]]<br/> 


File:rosebudtopplate.png|'''Rosebud top plate.''' - FreeCAD -[[File:rosebudtoplate.FCStd]].
File:seh2wall42.png|'''Wall Module 42''' <br/>FreeCAD- [[File:seh2_wall_42.fcstd]]<br/> 


</gallery>
File:seh2_9ft_panel.png|'''Wall Module 43''' <br/>FreeCAD- [[File:seh2_wall_43.fcstd]]<br/> 


=Wall Modules - LOD 400-500=
File:seh2_9ft_panel.png|'''Wall Module 44''' <br/>FreeCAD- [[File:seh2_wall_44.fcstd]]<br/> 
Note: for BOM-ready files, Master Module file includes clones for memory management and simplified view within Part Tree. Sample BOM file - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]. '''Missing from BOM file''' - R38 roof insulation, roof ceiling, interior framing, interior insulation. See BOM spreadsheet - [https://docs.google.com/spreadsheets/d/1mxd28_UTffkYQDfi8vPDwGrSyvsTUFg2UACXwgo7wGc/edit#gid=0] generated from FreeCAD BOM test file for first and second floor of house - not including garage - [https://gitlab.com/marcin_ose/seed-home-2/-/blob/master/sample_rosebud_bom.fcstd]
File:seh2wall45.png|'''Wall Module 45''' <br/>FreeCAD- [[File:seh2_wall_45.fcstd]]<br/> 




[[File:8footwindow5.png|100px]][[File:8footwindow4.png|100px]][[File:ddfinal.png|100px]][[File:ddplaceholder.png|100px]][[File:8footwall2.png|100px]][[File:8footwall.png|100px]][[File:9footmediumwindow4.png|100px]][[File:singledoormaster9.png|100px]][[File:SAWP.png|100px]][[File:doorsilltape.png|100px]][[File:dripcaptape.png|100px]][[File:dripcap.png|100px]][[File:9footdoorframe4.png.png|100px]][[File:9footdoorframe3.png.png|100px]][[File:9footdoubledoorplaceholder.png|100px]][[File:9footdoubledoor2.png|100px]][[File:9footdoubledooronly.png|100px]][[File:9footdoubledoor.png|100px]][[File:9footmediumwindow3.png|100px]][[File:9footmediumwindow2.png|100px]][[File:9footmediumwindowonly.png|100px]][[File:9footmediumwindow.png|100px]][[File:firstfloorwithdoor.png|100px]][[File:9footdoorframe2.png|100px]][[File:9footdoorframe.png|100px]][[File:9footdoor.png|100px]][[File:9footwalls132.png|100px]][[File:9footwalls13.png|100px]][[File:9footwall12panels.png|100px]][[File:9footwall2.png|100px]][[File:9footwall.png|100px]]
File:seh2wall46.png|'''Wall Module 46''' <br/>FreeCAD- [[File:seh2_wall_46.fcstd]]<br/> 
File:seh2_9ft_long_right_corner.png|'''Wall Module 47'''<br/>FreeCAD- [[File:seh2_wall_47.fcstd]]<br/> 


<gallery perrow=6>
</gallery>


File:8footwall2.png|'''8 Foot Wall Panel.''' - FreeCAD -[[File:8footwall.FCStd]].
=Plumbing Final=
'''See more at [[SEH 4 Plumbing]] - latest work from March 2022 onwards, needs update for 9' walls.'''


File:8footwindow4.png|'''8 Foot Large Window Panel. Pseudo, with med window and 9' studs.''' - FreeCAD -[[File:8footwindow.FCStd]].
=Electrical=


File:9footwall2.png|'''9 Foot Wall''' - FreeCAD -[[File:9footwall.FCStd]].
See [[SEH 4 Electrical]]


File:singledoormaster9.png|'''9 Foot Single Door Master.''' - FreeCAD -[[File:9footdoorpanel.FCStd]].
=Stairs=


File:ddfinal.png|'''9 Foot Double Door.''' - FreeCAD -[[File:9footdoubledoor.FCStd]].
https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules


File:ddplaceholder.png|'''9 Foot Double Door placeholder.''' - FreeCAD -[[File:9footdoubledoorplaceholder.FCStd]].
File:9footmediumwindow4.png|'''9 Foot Medium Window Panel.''' - FreeCAD -[[File:9footmediumwindow.FCStd]].
</gallery>
==Assemblies==
<gallery perrow=6>
<gallery perrow=6>


File:firstfloorwithdoor.png|'''9 Foot Walls'''. - FreeCAD -[[File:9footwalls.FCStd]].  
File:stairstringer2.png|'''Stair stringer with steps, no nosing.''' . FreeCAD -[[File:stairstringer.fcstd]]<br/> '''[[File:SEH4StringerCheatsheet.pdf]]'''.  


</gallery>
</gallery>


==Wall Parts==
Also - See [[Stairs]]
<gallery perrow=6>


File:largewindow.png|'''Large window.''' - FreeCAD -[[File:largewindowonly.FCStd]].
[[File:stairs_example.png|100px]]


File:9footdoubledooronly.png|'''9 Foot Double Door only.''' - FreeCAD -[[File:9footdoubledooronly.FCStd]].


File:9footmediumwindowonly.png|'''9 Foot Medium Window pane.''' - FreeCAD -[[File:9footmediumwindowonly.FCStd]].
<gallery perrow=6>


File:9footdoor.png|'''9 Foot Door, door only, single.''' - FreeCAD -[[File:9footdoor.FCStd]]. Source SweetHome folder - [https://drive.google.com/drive/folders/180KINsLnK6vUlcnhCgAyzDThc-vlaV1G].  
File:mudsillanchor2.png|'''Mudsill anchor.''' - FreeCAD -[[File:mudsillanchor.fcstd]]
File:rigidinsulpattern.png|'''Insulation pattern.''' Not rotated or positioned. - [[File:roofinsulpattern.fcstd]].


</gallery>
</gallery>


=Part Library=
=Foundation=
[[File:rosebudwalls.png|100px]][[File:spipe.png|100px]][[File:rosebudcore.png|100px]]
*From Catarina's folder - [https://drive.google.com/drive/folders/1xSnyMbsy6p_CJyLyHREWOhdzr2-UoSYv]
[[File:rosebudexp.png|100px]]
*More at [[Seed Eco-Home 4 3D CAD#Whole House Views]] and [[Seed Eco-Home 4 3D CAD#Select Details]]
[[File:rosebudfound.png|100px]]
[[Category: Seed Eco-Home]] [[Category: Seed Eco-Home 4]]
 
Aspen 1 has corridor in front, Aspen 2 in the back. Rosebud is the simplehut.
=Links=
*[[Seed Home 2]]

Latest revision as of 01:36, 20 May 2025

Working Doc

edit

CM

  • SEH Trellis
  • Check.png1300 + 2000 sf - [21]. Interior concept as to be built - 1.3k WHITE at [22].
    • Cabinets detail - It is found under OBI -> Designs -> Seed Home 2-> Rosebud 3 -> CAD -> Technical -> Interior Assemblies -> Kitchen. [23]
  • 1300 deco trellis technical [24]
  • The only place that shows the Trellis Top Band is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [25]

RH

SH4 Maysville Files

Tools

Module Generator

See FreeCAD Module Generator

Apertures

Quad Modules - Modules with Structure + MEP

Master Files

Select Details

Second Floor Interior

First Floor Interior

HintLightbulb.png Hint: The first floor exterior walls sit on the sill so the interior walls start 1.5" lower. These panels have been designed to use 106.125" studs (1.5" longer than standard pre-cut studs) so they will be the same height as the exterior walls when they are in place. The utility channel spacers are also raised 1.5" to be at the same height as in the exterior walls

Build Cheatsheets

HintLightbulb.png Hint: Drawing Dimensioning Workbench is no longer maintained/updated by FreeCAD, though it is still fine to use. The supported workbench is called TechDraw.
FreeCAD Wiki

Protocol: Note that only single objects can be used in dimensional drawings with the Drawing Dimensioning workbench. For complex assemblies, simply collapse into simple copies of compounds - or compound STEP exports (to turn them into simple solids). As such - take master files - take the necessary selection - and turn into one dumb object. Then you can get nice dimensions. Save the file with teh pages included - pages with dimensions show up in another tab, though.


Whole House Views

(moved 1000 sf version to Savannah SH 5)

Exterior Walls

HintLightbulb.png Hint: Use PDF Files, not PNG Thumbnails for module drawings. Verify with crew leader that the drawing is correct before assembling

First Floor Interior

Second Floor Interior

(8' version is at Seed_Home_v2_3D_CAD#Build_Cheatsheets)

First Floor Exterior

Second Floor Exterior - 9' Version

See also - Computer Generated 2nd Floor Exterior Wall Modules by Coderjeff Master files for both 8' and 9' walls with detailed parts - Coderjeff 2nd Floor Exterior.

Plumbing Final

See more at SEH 4 Plumbing - latest work from March 2022 onwards, needs update for 9' walls.

Electrical

See SEH 4 Electrical

Stairs

https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules

Also - See Stairs

Stairs example.png


Foundation

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Seed_Eco-Home_4_3D_CAD&oldid=307306"