Seed Eco-Home 4 3D CAD: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(352 intermediate revisions by 5 users not shown)
Line 1: Line 1:
===Master Files===
=Master Files=
<gallery perrow=6>
<gallery perrow=6>
File:Cabinetsasbuilt.png|'''Cabinets as built.''' - [[File:Kitchencabbom.fcstd]].


File:housewithpv.png|'''House with PV.''' FreeCAD- [[File:housewithpv.fcstd]] - incomplete. Final file 1.8MB CM- [https://drive.google.com/file/d/1v2gB28juvYIQVEguci2pwMEh03wzZs6G/view]. Final file with gutter, 5.5" taper, drip edge to engineer 7/28/22 [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/finished_SEH_3_for_Export.fcstd]. IFC export - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/Seed_Eco-Home_072922.ifc]. See Version Notes for export issue [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/wikis/Version-Notes]. '''Latest FreeCAD File 072922 - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/improved_export_clean_with_monolithic_1st_floor.FCStd]


File:pvpanelmounting.png|'''PV panel mounting.''' FreeCAD- [[File:pvpanelmounting.fcstd]]
File:masterelectrical.png|'''Master electrical + Electrical Boxes.''' - [[SH4_Electrical_Part_Library]].  Also '''Electrical Design.''' See [[SEH 4 Electrical]] with Maysville content in work doc.


File:taperedroof.png|'''Tapered roof.''' FreeCAD- [[File:taperedroof.fcstd]]
File:seh2_plumbing.png|'''Seed Eco-Home Plumbing.''' Working doc is good - see [[SEH 4 Plumbing]] - CAD needs update. '''Subassemblies''' started at  [[Seed_Eco-Home_4_3D_CAD#Select_Details]]
File:seh2_watersystem.png|'''Seed Eco-Home Water Supply.''' Gitalb, almost positionally correct - [https://gitlab.com/marcin_ose/seh-2-water-system/-/tree/main/#modal-upload-blob]. File with 5 components but not fittings: [[File:seh2_watersystem.fcstd]].
 
File:seh4foundationplumbing.png|'''Seed Eco-Home Foundation Plumbing.''' FreeCAD- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/plumbing_rough-in_1.fcstd]
 
File:utewallassy.png|'''Utility Wall assembly.''' Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -[[File:utewallassy.fcstd]]
 
File:housewithpv.png|'''House with PV SH2 version.''' FreeCAD- [[File:housewithpv.fcstd]] - incomplete. Final submitted for engineering - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_15.fcstd]. IFC export - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/Seed_Eco-Home_082922.ifc]. '''Update with new PV panels and hybrid inverter system [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_16.fcstd]'''. No top trellis trim band. But, all above is 1000 sf. 1300 sf is [https://drive.google.com/file/d/144Nv-Esxe3_kN4BwLTOm7HYDOBJqvu0S/view].


File:electrical.png |'''Electrical Design.''' FreeCAD -[[File:seh2electrical.fcstd]] start. Continued at Gitlab - [https://gitlab.com/opensourceecology.org/seh-2-electrical]. Latest - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/electrical_69.fcstd]. See also [[SEH 2 Electrical Design]] for part libraries and Design Doc [https://docs.google.com/presentation/d/1ryuVJO_YEAID97JgGmrzYeAFA_RrwwyLfWe0NdrobNc/edit#slide=id.g11ba6661126_0_15].
File:pvpanelmounting.png|'''PV panel mounting.''' Seed Eco-Home 2 version. FreeCAD- [[File:pvpanelmounting.fcstd]]


File:verticalcrosssection.png|'''Vertical Cross Section.''' FreeCAD- [[File:verticalcrosssection.fcstd]]
File:taperedroof.png|'''Tapered roof.''' FreeCAD- [[File:taperedroof.fcstd]]


File:modularcarport.png|'''Modular Carport.''' FreeCAD- [[File:modularcarport.fcstd]]
File:modularcarport.png|'''Modular Carport.''' FreeCAD- [[File:modularcarport.fcstd]]


File:masterinterface.png|'''Master interface design.''' FreeCAD- [[File:masterinterface.fcstd]]
File:Cabdsafsdf.png|'''Cabinets.''' - Not as built. Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Cabinets all - [[File:cabinets.fcstd]]. Cabinets pieces - [https://drive.google.com/drive/folders/19EANcq4E827mSh9vi0KCdMbK9KoncBlp]
 
File:Seh2.jpg|'''Catarina's FreeCAD 2022.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc].


File:houseassembly2.png|'''House Assembly - Master File'''. Started as whole house, but first floor was taken out and put into separate file. FreeCAD- [[File:houseassemblymaster.fcstd]]
File:bathlighting.png|'''Vanity lighting, fan, GFCI locations for bathroom.''' FreeCAD, see latest bathlighting file - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/tree/main]


File:seh2_firstfloor.png|'''House Assembly - First Floor Only'''. Includes carport. FreeCAD- [[File:seh2_firstfloor.fcstd]]  
File:Secondstoryframingl.png|'''Second Story Framing.''' This is just a simple copy of second floor. FreeCAD- [[File:secondstoryframing.fcstd]]


File:utewallassy.png|'''Utility Wall assembly.''' Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -[[File:utewallassy.fcstd]]  
File:seh2_firstfloorbeadboard.png|'''First Floor Beadboard.''' FreeCAD- [[File:seh2_firstfloorbeadboard.fcstd]]  


File:seh2_watersystem.png|'''Seed Eco-Home Water Supply.''' FreeCAD with fittings - [https://gitlab.com/marcin_ose/seh-2-water-system/-/blob/main/seh2_water-system_4.fcstd] and one-item part tree - [https://gitlab.com/marcin_ose/seh-2-water-system/-/tree/main/#modal-upload-blob]. File with 5 components but not fittings: [[File:seh2_watersystem.fcstd]].
File:closet.png|'''Closet.''' FreeCAD- [[File:closet.fcstd]]


File:seh2_plumbing.png|'''Seed Eco-Home Plumbing.''' FreeCAD complete - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom#modal-upload-blob] and one-item part tree plumbing only - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/blob/main/One_Piece_Plumbing.fcstd]. See also '''[[SEH 2 Kitchen and Bathroom Part Library]]''' and Design Doc [https://docs.google.com/presentation/d/1fAUttuSxS-AJl8mnhjV0xwxMBkYRnjLqyuL0W04DwZM/edit#slide=id.gb328b2d63d_0_9]
File:laundry.png|'''Laundry.''' FreeCAD- [[File:laundry.fcstd]]


File:Cabdsafsdf.png|'''Cabinets.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Cabinets all - [[File:cabinets.fcstd]]. Cabinets pieces - [https://drive.google.com/drive/folders/19EANcq4E827mSh9vi0KCdMbK9KoncBlp]
File:houselocation.png|'''House Location Master File''' FreeCAD- [[File:houselocation.fcstd]]


File:Seh2.jpg|'''Catarina's FreeCAD 2022.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc].
File:masterinterface.png|'''Master interface design.''' FreeCAD- [[File:masterinterface.fcstd]]
</gallery>
 
=CM=
*[[SEH Trellis]]
*{{check}}1300 + 2000 sf - [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Interior concept as to be built - 1.3k WHITE at [https://drive.google.com/drive/folders/1534QkF8WfZwMUOwwJ_Gp6S7zaT9K0Hf9].
**Cabinets detail - It is found under OBI -> Designs -> Seed Home 2-> Rosebud 3 -> CAD ->  Technical -> Interior Assemblies -> Kitchen. [https://drive.google.com/drive/folders/1zPmdJvAnxawWzvSbX51Jj-0y96LjucdQ]
*1300 deco trellis technical [https://drive.google.com/drive/folders/1TPDGyB-GeoLM0HlHd1OCRSBeVAv7IePa]
*The only place that shows the '''Trellis Top Band''' is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [https://drive.google.com/drive/folders/1ewZECHV3UEUlr1sZoUtx-AmjUFTM4s_1]


File:bathlighting.png|'''Vanity lighting, fan, GFCI locations for bathroom.''' FreeCAD, see latest bathlighting file - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/tree/main]
=RH=
*Google Drive - [https://drive.google.com/drive/folders/18afuCN4ttRhoXMgm-Bc2TD4N2Ndjmh2M]


File:2nd_interiorwalls.png|'''Second floor interior walls.'''. Includes risers. FreeCAD- [[File:2nd_interiorwalls.fcstd]]
=SH4 Maysville Files=
<gallery perrow=6>


File:2nd_interiorwallrisers.png|'''Second floor interior wall risers.'''. FreeCAD- [[File:2nd_interiorwallrisers.fcstd]]  
File:Shr.png|'''Seed Eco-Home 4 Maysville build.''' Catarina working file- [https://drive.google.com/file/d/144Nv-Esxe3_kN4BwLTOm7HYDOBJqvu0S/view]


File:Secondstoryframingl.png|'''Second Story Framing.''' This is just a simple copy of second floor. FreeCAD- [[File:secondstoryframing.fcstd]]
File:interiormodules.png|'''Interior Modules.''' [[File:interiormodules.fcstd]]


File:seh2_firstfloorbeadboard.png|'''First Floor Beadboard.''' FreeCAD- [[File:seh2_firstfloorbeadboard.fcstd]]  
File:moduleI1.png|'''Interior module I1.''' [[File:moduleI1.fcstd]]


File:trellis.png|'''Trellis.''' FreeCAD- [[File:trellis.fcstd]]
File:module48.png|'''Wall module 48.''' Corner. [[File:module48.fcstd]]
</gallery>


File:closet.png|'''Closet.''' FreeCAD- [[File:closet.fcstd]]
=Tools=
<gallery perrow=6>


File:laundry.png|'''Laundry.''' FreeCAD- [[File:laundry.fcstd]]
File:dewalt65cordlesscircular.png|'''Dewalt Cordless Circular Saw 6.5".''' Tool only.- FreeCAD -[[File:dewalt65circular.fcstd]].
File:interiorwalljig.png|'''Interior wall and door modules jig'''- FreeCAD -[[File:Sh4interiorwalljig.fcstd]].


File:bathroomonly.png|'''Plumbing on slab''' FreeCAD- [[File:Plumbing_on_slab.fcstd]]
</gallery>


File:houselocation.png|'''House Location Master File''' FreeCAD- [[File:houselocation.fcstd]]
=Module Generator=


File:doorwindow2.png|'''Door and window module for adjustment''' FreeCAD- [[File:doorwindow.fcstd]]
See [[FreeCAD Module Generator]]


</gallery>
<gallery perrow=6>


===Select Details===
File:beadboardgen.png|'''Interior sheathing generator.''' - FreeCAD -[[File:beadboardgen.fcstd]].


<gallery perrow=6 >


File:pvracking.png|PV rack. FreeCAD- [[File:pvrack.fcstd]]  
File:nailingboardgen.png|'''Nailing board.''' - FreeCAD -[[File:nailingboardgen.fcstd]].


File:trellisv2.png|Second iteration trellis. Positioned for master file. <br/>FreeCAD- [[File:trellisv2.fcstd]]


File:carportfooterassy.png|Car port footer assembly. 22" and 28". Dug with 22" auger. <br/>FreeCAD- [[File:carportfooterassy.fcstd]]  
File:customblockinggen.png|'''Custom blocking.''' For mounting all types of devices. FreeCAD -[[File:customblockinggen.fcstd]].


File:carportfooter.png|Car port footer. 22" and 28". Dug with 22" auger. <br/>FreeCAD- [[File:carportfooter.fcstd]]


File:2ndflbackwalldete.png|Second floor back wall detail. 9.5" height of cover. <br/>FreeCAD- [[File:2ndflbackwalldete.fcstd]]  
File:exteriorblockinggen.png|'''Exterior blocking.''' Creates first or second floor blocking. Corrects for 2nd floor window lowering. Allows corners. FreeCAD -[[File:exteriorblockinggen.fcstd]].


File:2ndfloorutechan.png|'''Second floor utility channel.''' Still 10" cover, may want 9.5"- [[File:2ndfloorutechan.fcstd]]


File:Blockignstetch.png|'''Floor joist blocking.''' With sketch. [[File:blockingsketch.fcstd]]
File:ladderblockinggen.png|'''Ladder blocking Module generator.''' To use - toggle the folder you need in the part tree. FreeCAD -[[File:ladderblockinggen.fcstd]].


File:Blockingcover.png|'''Floor joist cover.''' With sketch. [[File:blockingcover.fcstd]]


File:roofdetail.png|Vertical cross section Detail <br/>FreeCAD- [[File:roofdetail.fcstd]]
File:doormodulegen.png|'''Interior Door Module generator.''' - FreeCAD -[[File:custominteriordoorgen.fcstd]].


File:blockingdetail2.png|First Floor Ceiling Detail <br/>FreeCAD- [[File:blockingdetail.fcstd]]


File:southwalldetail3.png|South wall Detail <br/>FreeCAD- [[File:southwalldetail.fcstd]]  
File:utechanblocking.png|'''Utility channel blocking generator.''' Includes proper shortening of blocking- FreeCAD -[[File:utechanblockinggen.fcstd]]. 2x4 or other lumber selection for the wall type. Blocking itself is 2x4.


File:SEH2stairs.png|Stringerless stairs for SEH 2 <br/>FreeCAD- [[File:SEH2stairs.fcstd]]  
File:mainframinggen.png|'''Main framing generator.''' - FreeCAD -[[File:mainframinggenerator.fcstd]]. First, main structural submodule. Divided into submodules as in working doc [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g23da8acac2c_0_119]


File:stringerless.png|Stringerless stairs concept. '''See also [[Stairs]].''' <br/>FreeCAD- [[File:stringerless.fcstd]]


File:toptrim5.png|Top wall trim <br/>FreeCAD- [[File:toptrim.fcstd]]  
File:check.png|'''Monolithic house design kernel - module generation''' - FreeCAD -[[File:Modulegenerator.fcstd]]. Took it as far as spreadsheet broke. Divided into submodules as in working doc [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g23da8acac2c_0_119]


File:landing-box.png|Landing Box <br/>FreeCAD- [[File:Landing.fcstd]]
</gallery>
</gallery>


===Build Cheatsheets===
=Apertures=
Protocol: Note that only single objects can be used in dimensional drawings with the Drawing Dimensioning workbench. For complex assemblies, simply collapse into simple copies of compounds - or compound STEP exports (to turn them into simple solids). As such - take master files - take the necessary selection - and turn into one dumb object. Then you can get nice dimensions. Save the file with teh pages included - pages with dimensions show up in another tab, though.
<gallery perrow=6>
 
 
File:module48aperture.png|'''Module 48 main wire channel notch.''' FreeCAD -[[File:module48aperture.fcstd]].  


</gallery>


=Quad Modules - Modules with Structure + MEP=
<gallery perrow=6>
<gallery perrow=6>
File:quad37.png|'''Exterior Wall 37.''' With main stack vent and bath vent.  [[File:Exteriorwall37.FCStd]].'''
File:modulei2.png|'''Module i2.''' See also [[Water Heater Cabinet]]. FreeCAD -[[File:modulei2.fcstd]]
File:modulei1.png|'''Module i1.''' FreeCAD -[[File:modulei1.fcstd]].
File:check.png|'''Module 14.'''FreeCAD -[[File:module14.fcstd]]. Master file at Gitlab - [https://wiki.opensourceecology.org/wiki/File:Module14.fcstd].
File:subpanelinstall.png|'''Module 4 - Subpanel install.''' FreeCAD -[[File:subpanelinstall.fcstd]].


File:foundationcheatsheet.png|'''Foundation cheatsheet.''' Extracted from electrtical_68 file -[[File:foundationcheatsheet.FCStd]].
File:module15.png|'''Module 15.'''FreeCAD -[[File:module15.fcstd]].  
File:interiorwall1.png|'''Interior Wall 1.''' Bath Tub 1 wall. Extracted from plumbing_32 file. - [[File:interiorwall1.FCStd]].
File:interiorwall2.png|'''Interior Wall 2.''' Next to tub. Extracted from plumbing_32 file. - [[File:interiorwall2.FCStd]].
File:interiorwall3.png|'''Interior Wall 3 - thin.'''Extracted from electrical_68 file and modified. - [[File:interiorwall3.FCStd]].
File:interiorwall4.png|'''Interior Wall 4 - bath door.''' And 6 is small module on top. Extracted from electrical_69 file and modified. - [[File:interiorwall4.FCStd]].
File:interiorwall5.png|'''Interior Wall 5 - behind washer.''' And 7 is small module on top - [[File:interiorwall5.FCStd]].
File:interiorwall17.png|'''Interior Wall 17 and 18. Laundry closet wall.''' - [[File:interiorwall17.FCStd]].
File:interiorwall19.png|'''Interior Wall 19. Laundry closet cap.''' - [[File:interiorwall19.FCStd]].
File:ventfanlocation.png|'''Vent Fan Location.''' - [[File:ventfanlocation.FCStd]].
</gallery>
</gallery>




====Exterior Walls====
=Select Details=
<gallery perrow=6>
 
<gallery perrow=6 >
 
File:tubframing.png|'''Tub framing.''' - [[File:tubframing.fcstd]]
 
File:sh4stairs.png|'''Stair design for Seed Eco-Home 4''' - [[File:sh4stairs.fcstd]]
 
File:stackmount.png|'''Main vent stack mount blocking.''' - [[File:stackmount.fcstd]]
 
File:escutcheon.png|'''Esutcheon for 2" IPS/PVC/Iron.''' - [[File:escutcheon.fcstd]]
File:stringer.png|'''Stair stringer.''' - [[File:stairstringer.fcstd]]
File:venthoodcab.png|'''Vent hood cabinet.''' - [[File:venthoodcab.fcstd]]
File:intwinassy.png|'''Interior Window Assembly.''' - [[File:intwinassy.fcstd]]
File:floor1sill.png|'''Floor 1 sills + apertures.''' - [[File:floor1sill.fcstd]]
File:floor2sill.png|'''Floor 2 sills + apertures.''' - [[File:floor2sill.fcstd]]
File:doublesinkplumbing.png|'''Double sink plumbing.''' - Gitlab- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/Double_Sink_Dim_Drawing.fcstd]
 
File:sinkplumbing.png|'''Sink plumbing.''' - [[File:sinkplumbing.fcstd]]
 
 
 
File:toilet2plumbing.png|'''2nd Floor Toilet plumbing.''' - [[File:toilet2plumbing.FCStd]]
 
File:module67beadboard.png|'''Module 67 beadboard''' [[File:module67beadboard.fcstd]]
 
 
File:powercenterextblockinginside.png|'''Power Center Exterior Blocking -''' but looking from the inside. Has stud holes for PV LFMC. [[File:powercenterextblockinginside.fcstd]]
 
File:powercenterintblocking.png|'''Power Center Interior Blocking.''' Has stud holes for PV LFMC.[[File:powercenterintblocking.fcstd]]
 
File:powercenterextblocking.png|'''Power Center Exterior Blocking.''' Does not have stud holes for PV. [[File:powercenterextblocking.fcstd]]


File:exteriorwall1.png|'''Exterior Wall 1.''' Build cheatsheet. [[File:exteriorwall1.FCStd]].
File:mainvent.png|'''Main vent.''' Near positionally correct. [[File:Mainvent.fcstd]]
File:exteriorwall2.png|'''Exterior Wall 2.''' Build cheatsheet.  [[File:exteriorwall2.FCStd]].


File:heatpumpthru.png|'''Heat pump through-tube geometry.''' [[File:heatpumpthru.fcstd]]


</gallery>
File:heatpumpinterface.png|'''Heat pump interface plate.''' Includes tech drawing. [[File:heatpumpinterfaceplate.fcstd]]


===First Floor Exterior===
File:heatpumpdownspout.png|'''Heat pump downspout detail.''' [[File:heatpumpdownspout.fcstd]]


<gallery perrow=6>
File:heatpump24000.png|'''Heat pump mounting for 24000 BTU Heat Pump.''' Also found in [[SH4 Electrical Part Library]]. - [[File:heatpump24000.fcstd]]


File:positionallycorrectmod1.png|'''Wall Module 1''' SweetHome3D- [[File:seh2wall1.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_1.fcstd]]<br/>[[Build Cheatsheet for Wall Module 1|Build Cheatsheet]]  
File:deck.png|'''Front deck, floating.''' [https://drive.google.com/file/d/1s8XA6LmkRlaGqGlI9IY0wGp79pxVV2Lj/view]. Technical drawing: [[File:deck.fcstd]]


File:seh2wall2.png|'''Wall Module 2''' SweetHome3D- [[File:seh2wall2.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_2.fcstd]]<br/>[[Build Cheatsheet for Wall Module 2|Build Cheatsheet]]


File:seh2wall3rework4.png|'''Wall Module 3''' SweetHome3D- [[File:seh2_wall_3.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_3.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_3|Build Cheatsheet]]  
File:retainingwall.png|'''Retaining wall.''' [[File:retainingwall.fcstd]]


File:seh2wall4freecad.png|'''Wall Module 4''' SweetHome3D- [[File:seh2_wall_4.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_4.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_4|Build Cheatsheet]]  
File:turningradius.png|'''Walkway + Driveway turning radius''' [[File:turningradius.fcstd]]


File:seh2wall5.png|'''Wall Module 5''' SweetHome3D- [[File:seh2_wall_5.sh3d.zip]]<br/> [[Build_Cheatsheet_for_Wall_Module_5|Build Cheatsheet]]<br/> FreeCAD- [[File:seh2_wall_5.fcstd]] -  Same as Wall Module 17 (opposite long side left corner)
File:module4beadboard.png|'''Module 4 beadboard''' [[File:module4beadboard.fcstd]]


File:seh2wall6.png|'''Wall Module 6''' SweetHome3D- [[File:seh2_wall_6.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_6.fcstd]] <br/>[[Build_Cheatsheet_for_Wall_Module_6|Build Cheatsheet]]


File:seh2wall7.png|'''Wall Module 7''' SweetHome3D- [[File:seh2_wall_7.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_7.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_7|Build Cheatsheet]]  
File:pvdcdiscoblocking.png|'''PV DC Disconnect Blocking''' [[File:pvdcdiscoblocking.fcstd]]


File:adjustmentmodule8.png|'''Wall Module 8''' SweetHome3D- [[File:seh2_wall_8.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_8.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_8|Build Cheatsheet]] Adjustment module.


File:seh2wall9.png|'''Wall Module 9''' SweetHome3D- [[File:seh2_wall_9.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_9.fcstd]] <br/> [[Build_Cheatsheet_for_Wall_Module_9|Build Cheatsheet]]  
File:sewertap.png|'''Sewer Ta[-''' 4" pipe onto 6" pipe. [[File:sewertap.fcstd]]


File:seh2_wall_10.png|'''Wall Module 10''' SweetHome3D- [[File:seh2_wall_10.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_10.fcstd]] <br/>[[Build_Cheatsheet_for_Wall_Module_10|Build Cheatsheet]]


File:Seh2 wall 11.png|'''Wall Module 11''' SweetHome3D- [[File:seh2_wall_11.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_11.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_11|Build Cheatsheet]]


File:seh2wall12.png|'''Wall Module 12''' SweetHome3D- [[File:seh2_wall_12.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_12.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_12|Build Cheatsheet]]. Structure same as Module 23.
File:gravelbox.png|'''Gravel box.''' [[File:gravelbox.fcstd]]


File:seh2wall1freecad.png|'''Wall Module 13''' SweetHome3D- [[File:seh2_wall_13.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_13.fcstd]] <br/>[[Build_Cheatsheet_for_Wall_Module_13|Build Cheatsheet]] Same as Wall 1 structure. But - Wall 1 has a hole for electrical.
File:windowboxes.png|'''Window boxes.''' [[File:windowboxes.fcstd]]


File:seh2wall14.png|'''Wall Module 14''' SweetHome3D- [[File:seh2_wall_14.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_14.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_14|Build Cheatsheet]]  
File:windowtrim.png|'''Window trim.''' Next step is to add stained pieces around. [[File:windowtrim.fcstd]]


File:seh2wall15.png|'''Wall Module 15''' SweetHome3D- [[File:seh2_wall_15.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_15.FCStd]]<br/> [[Build_Cheatsheet_for_Wall_Module_15|Build Cheatsheet]]
File:wallmodule67.png|'''[[Electrical part library]].'''


File:Seh2wall16.png|'''Wall Module 16''' SweetHome3D- [[File:seh2_wall_16.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_16.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_16|Build Cheatsheet]] Same structure as Module 4.


File:seh2wall17.png|'''Wall Module 17''' SweetHome3D- [[File:seh2_wall_17.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_17.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_17|Build Cheatsheet]]


File:smallwindow3.png|'''Wall Module 18''' SweetHome3D- [[File:seh2_wall_18.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_18.fcstd]] <br/>[[B:uild_Cheatsheet_for_Wall_Module_18|Build Cheatsheet]] 1st story window module.
File:waterexpansiontank.png|'''Water expansion tank''' - [[File:waterexpansiontank.fcstd]]


File:smallwindow3.png|'''Wall Module 19''' SweetHome3D- [[File:seh2_wall_19.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_19.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_19|Build Cheatsheet]] First story window module. Structure same as 18.


File:Seh2wall20.png|'''Wall Module 20''' SweetHome3D- [[File:seh2_wall_20.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_20.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_20|Build Cheatsheet]]
File:seh2_wall_21.png|'''Wall Module 21''' SweetHome3D- [[File:seh2_wall_21.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_21.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_21|Build Cheatsheet]]


File:frenchdoorexteriortrimdetail.png|'''Wall Module 22''' SweetHome3D- [[File:seh2_wall_22.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_22.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_22|Build Cheatsheet]] Note: FreeCAD file is updated, SH3D is older


File:seh2wall23.png|'''Wall Module 23''' FreeCAD- [[File:seh2_wall_23.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_23|Build Cheatsheet]]
File:wanxiang.png|'''Wanxiang 230W PV Panels  -28 panel array''' Array, positionally correct X,Y - 1" off on Z. - [[File:wanxiang230.FCStd]]
</gallery>


===Second Floor Exterior===
File:panelmounting.png|'''Wanxiang 230W PV Panels.''' Single panel. Includes tech drawing of back mount - [[File:panelmounting.FCStd]]


'''See also - Computer Generated 2nd Floor Exterior Wall Modules by Coderjeff'''
Master files for both 8' and 9' walls with detailed parts - [[Coderjeff 2nd Floor Exterior]].


<gallery perrow=6>
File:PVpanelmountingcad.png|'''PV Panel mounting CAD.''' Not positionally correct in Z direction, ok in X, Y - [[File:PVpanelmountingcad.FCStd]]


File:seh2_9ft_short_left_corner.png|'''Wall Module 24''' <br/>FreeCAD- [[File:seh2_wall_24.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_24|Build Cheatsheet]]


File:seh2_9ft_panel.png|'''Wall Module 25''' <br/>FreeCAD- [[File:seh2_wall_25.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_25|Build Cheatsheet]]  
File:Powerladderangles.png|'''Power ladder angles.''' [[File:powerladderangles.fcstd]]. Source - [[File:28ladder.FCStd]]


File:Upperdoorupdate.png|'''Wall Module 26 - second story door''' <br/>FreeCAD- [[File:seh2_wall_26.fcstd]] <br/> [[Build_Cheatsheet_for_Wall_Module_26|Build Cheatsheet]]  
File:gravellock.png|'''Gravel lock.''' Merge with main Maysville 2023 file. [[File:gravellock.fcstd]]


File:seh2_9ft_short_right_corner.png|'''Wall Module 27''' <br/>FreeCAD- [[File:seh2_wall_27.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_27|Build Cheatsheet]]  
File:trellisbandgeo.png|'''Trellis band geometry.''' - [[File:trellisbandgeo.fcstd]]


File:seh2_9ft_long_left_corner.png|'''Wall Module 28''' <br/>FreeCAD- [[File:seh2_wall_28.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_28|Build Cheatsheet]]  
File:fronttrellisassy.png|'''Front Trellis Assembly.''' Includes production drawing.- [[File:fronttrellisassy.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 29''' <br/>FreeCAD- [[File:seh2_wall_29.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_29|Build Cheatsheet]]  
File:trellisinstall.png|'''Front Trellis inatallation geometry.''' - [[File:trellisinstall.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 30''' <br/>FreeCAD- [[File:seh2_wall_30.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_30|Build Cheatsheet]]  
File:lefttrellisassy.png|'''Left Trellis Assembly.''' - [[File:lefttrellisassy.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 31''' <br/>FreeCAD- [[File:seh2_wall_31.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_31|Build Cheatsheet]]  
File:vinylaiding.png|'''Vinyl siding.''' - [[File:vinylsiding.fcstd]]


File:seh2wall32.png|'''Wall Module 32''' <br/>FreeCAD- [[File:seh2_wall_32.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_32|Build Cheatsheet]]  
File:integratedwindowtrim.png|'''Window trim integrated with J-Channel.''' For 2nd floor windows. - [https://drive.google.com/u/1/uc?id=1OwYPNDRCBJZCHfnyurYE55M9WS42CH9s&export=download]. Each layer is in separate files: [[File:topwindowinnertrimframe.fcstd]]  


File:seh2_9ft_panel.png|'''Wall Module 33''' <br/>FreeCAD- [[File:seh2_wall_33.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_33|Build Cheatsheet]]  
File:windowboxes.png|'''Trim with window boxes.''' - [[File:windowboxes.fcstd]]


File:seh2_9ft_panel.png|'''Wall Module 34''' <br/>FreeCAD- [[File:seh2_wall_34.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_34|Build Cheatsheet]]
File:correctiontrim.png|'''French door plumb correction trim.''' - [https://drive.google.com/file/d/17FYxVrwIPDoYF_tbtTAPnVDkDhFQmUP4/view?ts=63f415d8]
File:seh2_9ft_long_right_corner.png|'''Wall Module 35''' <br/>FreeCAD- [[File:seh2_wall_35.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_35|Build Cheatsheet]]  


File:seh2_9ft_short_left_corner.png|'''Wall Module 36''' <br/>FreeCAD- [[File:seh2_wall_36.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_36|Build Cheatsheet]]  
File:foundationflashing.png|'''Foundation flashing geometry.''' - [[File:foundationflashing.FCStd]]


File:seh2_9ft_panel.png|'''Wall Module 37''' <br/>FreeCAD- [[File:seh2_wall_37.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_37|Build Cheatsheet]]
File:railingprofile.png|'''Railing Profile.''' [[File:railingprofile.fcstd]].


File:seh2_9ft_panel.png|'''Wall Module 38''' <br/>FreeCAD- [[File:seh2_wall_38.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_38|Build Cheatsheet]]
File:garageheader.png|'''Garage Header.''' [[File:garageheader.fcstd]].


File:seh2_9ft_short_right_corner.png|'''Wall Module 39''' <br/>FreeCAD- [[File:seh2_wall_39.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_39|Build Cheatsheet]]
File:exteriortrim.png|'''Exterior trim.''' [[File:exteriortrim.fcstd]].


File:seh2_9ft_long_left_corner.png|'''Wall Module 40'''<br/>FreeCAD- [[File:seh2_wall_40.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_40|Build Cheatsheet]]
File:hurricanetiesongarage.png|'''Hurricane ties on garage.''' Detail for 2 next to each other. See [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g1c4d1fcf8a6_0_95 work doc]. [[File:hurricanetiesongarage.fcstd]].


File:seh2wall41.png|'''Wall Module 41''' <br/>FreeCAD- [[File:seh2_wall_41.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_41|Build Cheatsheet]]
File:livingroomcircuit.png|'''Living room circuit.''' [[File:livingroomcircuit.fcstd]].


File:seh2wall42.png|'''Wall Module 42''' <br/>FreeCAD- [[File:seh2_wall_42.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_42|Build Cheatsheet]]
File:workginlandingdetail.png|'''Working landing utility channel detail.''' [[File:workginlandingdetail.fcstd]].


File:seh2_9ft_panel.png|'''Wall Module 43''' <br/>FreeCAD- [[File:seh2_wall_43.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_43|Build Cheatsheet]]
File:frontdoorwithchannel.png|'''Front door with utility channel.''' Modified for 5" trim prototyped on Seed Eco-Home 1.  [[File:frontdoorwithchannel.fcstd]].


File:seh2_9ft_panel.png|'''Wall Module 44''' <br/>FreeCAD- [[File:seh2_wall_44.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_44|Build Cheatsheet]]
File:staires.png|'''Stairs.''' [[File:seh2stairs.fcstd]]. See [https://docs.google.com/presentation/d/1N1lS8RBMy0Y0JnR_h1tz23CYFoR5zespNG4T5m4nnZE/edit#slide=id.gd0d0ba6c1a_0_0] for Stair Design Guide - with stringers.
File:seh2wall45.png|'''Wall Module 45''' <br/>FreeCAD- [[File:seh2_wall_45.fcstd]]<br/>  [[Build_Chatsheet_for_Wall_Module_45|Build Cheatsheet]]


File:seh2wall46.png|'''Wall Module 46''' <br/>FreeCAD- [[File:seh2_wall_46.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_46|Build Cheatsheet]]
File:seh4landing.png|'''Landing.''' [[File:seh4landing.fcstd]]. SEH 2 version at [[File:Landing.fcstd]]  
File:seh2_9ft_long_right_corner.png|'''Wall Module 47'''<br/>FreeCAD- [[File:seh2_wall_47.fcstd]]<br/>  [[Build_Cheatsheet_for_Wall_Module_47|Build Cheatsheet]]  


</gallery>
File:verticalcrosssection.png|'''Vertical Cross Section.''' FreeCAD- [[File:verticalcrosssection.fcstd]]


===First Floor Interior===
File:pvracking.png|PV rack. FreeCAD- [[File:pvrack.fcstd]]


{{Hint|The first floor exterior walls sit on the sill so the interior walls start 1.5" lower.  These panels have been designed to use 106.125" studs (1.5" longer than standard pre-cut studs) so they will be the same height as the exterior walls when they are in place.  The utility channel spacers are also raised 1.5" to be at the same height as in the exterior walls}}
File:toproofband.png|Top roof band. FreeCAD- [[File:toproofband.fcstd]]


<gallery perrow=6>
File:EPDM+termination.png|EPDM roof + termination bar. FreeCAD- [[File:epdm+term.fcstd]]


File:seh2_9ft_interior.png|'''Full 2x4 interior panel''' FreeCAD Detail- [[File:seh2_9ft_interior.fcstd]]<br/>Modules 58 & 59
File:pvledgerbrackets.png|PV ledgerbrackets. FreeCAD- [[File:pvledgerbrackets.fcstd]]  


File:seh2_9ft_2x6_interior.png|'''Full 2x6 interior panel''' FreeCAD Detail- [[File:seh2_9ft_2x6_interior.fcstd]]<br/>Modules 48 & 49
File:tophouseOSB.png|'''Top of the house OSB.''' FreeCAD- [[File:tophouseOSB.fcstd]]  


File:seh2_9ft_2x6_interior.png|'''Wall Module 48''' SweetHome3D- [[File:seh2_wall_48.sh3d.zip]] <br/>[[File:seh2_wall_48.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_48|Build Cheatsheet]]  
File:trellisv2.png|Second iteration trellis. Positioned for master file. <br/>FreeCAD- [[File:trellisv2.fcstd]]  


File:seh2_9ft_2x6_interior.png|'''Wall Module 49''' FreeCAD- [[File:seh2_wall_49.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_49|Build Cheatsheet]]  
File:carportfooterassy.png|Car port footer assembly. 22" and 28". Dug with 22" auger. <br/>FreeCAD- [[File:carportfooterassy.fcstd]]  


File:seh2_wall_50.png|'''Wall Module 50''' FreeCAD- [[File:seh2_wall_50.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_50|Build Cheatsheet]]  
File:carportfooter.png|Car port footer. 22" and 28". Dug with 22" auger. <br/>FreeCAD- [[File:carportfooter.fcstd]]  


File:seh2wall51.png|'''Wall Module 51-First Floor Bathroom Door''' SweetHome3D- [[File:seh2_wall_51.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_51.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_51|Build Cheatsheet]]  
File:2ndflbackwalldete.png|Second floor back wall detail. 9.5" height of cover. <br/>FreeCAD- [[File:2ndflbackwalldete.fcstd]]  


File:seh2wall52.png|'''Wall Module 52-First Floor Bathroom Wall''' SweetHome3D- [[File:seh2_wall_52.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_52.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_52|Build Cheatsheet]]  
File:2ndfloorutechan.png|'''Second floor utility channel.''' Still 10" cover, may want 9.5"- [[File:2ndfloorutechan.fcstd]]


File:laundry.png|'''Wall Module 55 (Laundry)''' <br/>FreeCAD- [[File:Laundry.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_55|Build Cheatsheet]]<br/> modules 53, 54 & 55 combined
File:Blockignstetch.png|'''Floor joist blocking.''' With sketch. [[File:blockingsketch.fcstd]]


File:seh2wall56.png|'''[[Wall Module 56]]'''[https://drive.google.com/file/d/16dmPzyMUUcRUyOfgH4Kv7yQOHTJ2IEDz/view?usp=sharing]<br/>FreeCAD- [[File:seh2_wall_56.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_56|Build Cheatsheet]]
File:Blockingcover.png|'''Floor joist cover.''' With sketch. [[File:blockingcover.fcstd]]
File:seh2wall57.png|'''Wall Module 57''' FreeCAD- [[File:seh2_wall_57.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_57|Build Cheatsheet]]
File:seh2_9ft_interior.png|'''Wall Module 58''' FreeCAD- [[File:seh2_wall_58.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_58|Build Cheatsheet]]  


File:seh2_9ft_interior.png|'''Wall Module 59''' FreeCAD- [[File:seh2_wall_59.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_59|Build Cheatsheet]]  
File:blockingdetail2.png|First Floor Ceiling Detail <br/>FreeCAD- [[File:blockingdetail.fcstd]]  


</gallery>
</gallery>


===Second Floor Interior===
=Second Floor Interior=
 


<gallery perrow=6>
<gallery perrow=6>
File:2ndfloorutechan.png|'''Second floor utility channel.''' FreeCAD Detail- [[File:2ndfloorutechan.fcstd]]
File:secondfloorinterior.png|'''Second floor interior walls.''' Not. [[File:secondfloorinterior.FCStd]].


File:seh2_bathroomwalls.png|'''SEH 2 Bathroom Walls.''' FreeCAD Detail- [[File:seh2_bathroomwalls.fcstd]]


File:seh2_8ft_interior.png|'''Full interior panel''' FreeCAD Detail- [[File:seh2_8ft_interior.fcstd]]
</gallery>


File:seh2_8ft_interior_door.png|'''Interior door''' FreeCAD Detail- [[File:seh2_8ft_interior_door.fcstd]]<br/> (38x83 rough opening)
=First Floor Interior=


File:seh2wall60.png|'''Wall Module 60''' SweetHome3D-[[File:seh2_wall_60.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_60.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_60|Build Cheatsheet]]
{{Hint|The first floor exterior walls sit on the sill so the interior walls start 1.5" lower.  These panels have been designed to use 106.125" studs (1.5" longer than standard pre-cut studs) so they will be the same height as the exterior walls when they are in place. The utility channel spacers are also raised 1.5" to be at the same height as in the exterior walls}}


File:seh2wall61.png|'''Wall Module 61''' SweetHome3D-[[File:seh2_wall_61.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_61.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_61|Build Cheatsheet]]
<gallery perrow=6>


File:seh2wall62.png|'''[[Wall Module 62]]''' SweetHome3D-[[File:seh2_wall_62.sh3d.zip]]<br/> [[File:seh2_wall_62.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_62|Build Cheatsheet]]
File:laundry.png|'''Wall Module 55 (Laundry)'''. FreeCAD- [[File:Laundry.fcstd]]. Modules 53, 54 & 55 combined
   
   
File:seh2wall63-4.png|'''Wall Module 63''' SweetHome3D-[[File:seh2_wall_63.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_63.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_63|Build Cheatsheet]]
</gallery>


File:seh2wall64.png|'''Wall Module 64''' SweetHome3D-[[File:seh2_wall_64.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_64.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_64|Build Cheatsheet]]  
=Build Cheatsheets=
{{Hint|Drawing Dimensioning Workbench is no longer maintained/updated by FreeCAD, though it is still fine to use. The supported workbench is called TechDraw. <br/> [https://wiki.freecad.org/Drawing_Dimensioning_Addon FreeCAD Wiki]}}
Protocol: Note that only single objects can be used in dimensional drawings with the Drawing Dimensioning workbench. For complex assemblies, simply collapse into simple copies of compounds - or compound STEP exports (to turn them into simple solids). As such - take master files - take the necessary selection - and turn into one dumb object. Then you can get nice dimensions. Save the file with teh pages included - pages with dimensions show up in another tab, though.
 
 
==Whole House Views==
 
(moved 1000 sf version to Savannah SH 5)
<gallery perrow=6>
File:sh4sillplate.png|'''Sill plate and top plate.''' SH 4 sill plate and top plate are identical. [[File:sh4sillplate.fcstd]]. Garage sill plate - [[file:garagesillplate.fcstd]]


File:seh2_8ft_interior_door.png|'''Wall Module 65''' SweetHome3D-[[File:seh2_wall_65.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_65.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_65|Build Cheatsheet]]
File:seh2wall66.png|'''Wall Module 66''' SweetHome3D-[[File:seh2_wall_66.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_66.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_66|Build Cheatsheet]]
File:seh2_8ft_interior.png|'''Wall Module 67''' SweetHome3D-[[File:seh2_wall_67.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_67.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_67|Build Cheatsheet]]


File:Seh2wall68.png|'''Wall Module 68''' SweetHome3D- [[File:seh2_wall_68.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_68.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_68|Build Cheatsheet]]<br/>[https://github.com/cryptogoth/freecad-python/blob/main/Panel-Workbench/PanelsGui.py#L80 Python Workbench Code]


File:seh2wall69.png|'''Wall Module 69''' SweetHome3D- [[File:seh2_wall_69.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_69.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_69|Build Cheatsheet]]
File:SEH4FirstFloorInteriorModulesLayout.png|'''Top View of First Floor Interior Modules Layout''' -  
</gallery>
</gallery>


===Second Story Platform===
==Exterior Walls==
{{Hint|Use PDF Files, not PNG Thumbnails for module drawings. Verify with crew leader that the drawing is correct before assembling}}
<gallery perrow=6>
File:exteriorwall1.png|'''Exterior Wall 1.''' Build cheatsheet.  [[File:exteriorwall1.FCStd]] '''[[File:SEH4exteriorwall1.pdf]]'''.
File:check.png|'''Exterior Wall 2.''' Build cheatsheet.  [[File:SEH4exteriorwall2.pdf]].
File:x.png|'''Exterior Wall 3.''' Build cheatsheet.  [[File:SEH4exteriorwall3.pdf]].
File:check.png|'''Exterior Wall 4.''' Build cheatsheet.  [[File:SEH4exteriorwall4.pdf]].
File:check.png|'''Exterior Wall 5.''' Build cheatsheet.  [[File:SEH4exteriorwall5.pdf]].
File:exteriorwall6.png|'''Exterior Wall 6.''' Build cheatsheet.  [[File:exteriorwall6.FCStd]].
File:check.png|'''Exterior Wall 7.''' Build cheatsheet (same as 11).  [[File:seh4exteriorwall11.pdf]].
File:check.png|'''Exterior Wall 8.''' Build cheatsheet (same as 11).  [[File:seh4exteriorwall11.pdf]].
File:exteriorwall9.png|'''Exterior Wall 9. Single Door''' Build cheatsheet.  [[File:seh4exteriorwall9.pdf]].
File:check.png|'''Exterior Wall 10.''' Build cheatsheet.(same as 11). [[File:seh4exteriorwall11.pdf]]..
File:exteriorwall11.png|'''Exterior Wall 11.''' Build cheatsheet.  [[File:seh4exteriorwall11.pdf]].
File:check.png|'''Exterior Wall 12.''' Build cheatsheet.  [[File:seh4exteriorwall12.pdf]].
File:exteriorwall13.png|'''Exterior Wall 13.''' Build cheatsheet.  [[File:exteriorwall13.FCStd]].
File:check.png|'''Exterior Wall 14.''' Build cheatsheet. (same as 11).  [[File:seh4exteriorwall11.pdf]].
File:exteriorwall15.png|'''Exterior Wall 15.''' Build cheatsheet.  [[File:SEH4Exteriorwall15.pdf]].
File:exteriorwall16.png|'''Exterior Wall 16.''' Build cheatsheet.  [[File:SEH4Exteriorwall1.pdf]].
File:Exteriorwall17.png|'''Exterior Wall 17.''' Build cheatsheet.  [[File:SEH4Exteriorwall17.pdf]].
File:exteriorwall18.png|'''Exterior Wall 18.''' Build cheatsheet.  [[File:exteriorwall18.FCStd]].
File:exteriorwall19.png|'''Exterior Wall 19.''' Build cheatsheet.  [[File:exteriorwall19.FCStd]].
File:exteriorwall20.png|'''Exterior Wall 20.''' Build cheatsheet.  [[File:SEH4Exteriorwall20.pdf]].
File:exteriorwall21.png|'''Exterior Wall 21.''' Build cheatsheet.  [[File:SEH4exteriorwall21.pdf]].
File:exteriorwall22.png|'''Exterior Wall 22. Double Door''' Build cheatsheet.  [[File:seh4exteriorwall22.pdf]].
File:exteriorwall23.png|'''Exterior Wall 23.''' Build cheatsheet.  [[File:exteriorwall23.pdf]].
File:exteriorwall24.png|'''Exterior Wall 24.''' Build cheatsheet.  [[File:Exteriorwall24.FCStd]].'''[[File:SEH4Exteriorwall24.pdf]]'''
File:exteriorwall25.png|'''Exterior Wall 25.''' Build cheatsheet.  [[File:Exteriorwall25.FCStd]].'''[[File:SEH4Exteriorwall25.pdf]]'''
File:exteriorwall26.png|'''Exterior Wall 26.''' Build cheatsheet.  [[File:Exteriorwall26.FCStd]].'''[[File:SEH4Exteriorwall26.pdf]]'''
File:exteriorwall27.png|'''Exterior Wall 27.''' Build cheatsheet.  [[File:Exteriorwall27.FCStd]].'''[[File:SEH4Exteriorwall27.pdf]]'''
File:exteriorwall28.png|'''Exterior Wall 28.''' Build cheatsheet.  [[File:Exteriorwall28.FCStd]].'''[[File:SEH4Exteriorwall28.pdf]]'''
File:exteriorwall29.png|'''Exterior Wall 29.''' Build cheatsheet.  [[File:Exteriorwall29.FCStd]].'''[[File:SEH4Exteriorwall29.pdf]]'''
File:exteriorwall30.png|'''Exterior Wall 30.''' Build cheatsheet.  [[File:Exteriorwall30.FCStd]].'''[[File:SEH4Exteriorwall30.pdf]]'''
File:exteriorwall31.png|'''Exterior Wall 31.''' Build cheatsheet.  [[File:Exteriorwall31.FCStd]].'''[[File:SEH4Exteriorwall31.pdf]]'''
File:exteriorwall32.png|'''Exterior Wall 32.''' Build cheatsheet.  [[File:Exteriorwall32.FCStd]].'''[[File:SEH4Exteriorwall32.pdf]]'''
File:exteriorwall33.png|'''Exterior Wall 33.''' Build cheatsheet.  [[File:Exteriorwall33.FCStd]].'''[[File:SEH4Exteriorwall33.pdf]]'''
File:exteriorwall34.png|'''Exterior Wall 34.''' Build cheatsheet.  [[File:Exteriorwall34.FCStd]].'''[[File:SEH4Exteriorwall34.pdf]]'''
File:exteriorwall35.png|'''Exterior Wall 35.''' Build cheatsheet.  [[File:Exteriorwall35.FCStd]].'''[[File:SEH4Exteriorwall35.pdf]]'''
File:exteriorwall36.png|'''Exterior Wall 36.''' Build cheatsheet.  [[File:Exteriorwall36.FCStd]].'''[[File:SEH4Exteriorwall36.pdf]]'''


[[File:secondstoryfloor4.png|100px]][[File:secondstoryfloor3.png|100px]][[File:secondstoryfloor2.png|100px]][[File:secondstoryfloor.png|100px]]
File:exteriorwall38.png|'''Exterior Wall 38.''' Build cheatsheet.  [[File:Exteriorwall38.FCStd]].'''[[File:SEH4Exteriorwall38.pdf]]'''
File:exteriorwall39.png|'''Exterior Wall 39.''' Build cheatsheet.  [[File:Exteriorwall39.FCStd]].'''[[File:SEH4Exteriorwall39.pdf]]'''
File:exteriorwall40.png|'''Exterior Wall 40.''' Build cheatsheet.  [[File:Exteriorwall40.FCStd]].'''[[File:SEH4Exteriorwall40.pdf]]'''
File:exteriorwall41.png|'''Exterior Wall 41.''' Build cheatsheet.  [[File:Exteriorwall41.FCStd]].'''[[File:SEH4Exteriorwall41.pdf]]'''
File:exteriorwall42.png|'''Exterior Wall 42.''' Build cheatsheet.  [[File:Exteriorwall42.FCStd]].'''[[File:SEH4Exteriorwall42.pdf]]'''
File:exteriorwall43.png|'''Exterior Wall 43.''' Build cheatsheet.  [[File:Exteriorwall43.FCStd]].'''[[File:SEH4Exteriorwall43.pdf]]'''
File:exteriorwall44.png|'''Exterior Wall 44.''' Build cheatsheet.  [[File:Exteriorwall44.FCStd]].'''[[File:SEH4Exteriorwall44.pdf]]'''
File:exteriorwall45.png|'''Exterior Wall 45.''' Build cheatsheet.  [[File:Exteriorwall45.FCStd]].'''[[File:SEH4Exteriorwall45.pdf]]'''
File:exteriorwall46.png|'''Exterior Wall 46.''' Build cheatsheet.  [[File:Exteriorwall46.FCStd]].'''[[File:SEH4Exteriorwall46.pdf]]'''
File:exteriorwall47.png|'''Exterior Wall 47.''' Build cheatsheet.  [[File:Exteriorwall47.FCStd]].'''[[File:SEH4Exteriorwall47.pdf]]'''
</gallery>


<gallery>
==First Floor Interior==


File:secondstoryfloor3.png|'''[[Second Story Floor Platform]]''' - FreeCAD - [[File:secondstoryfloor.fcstd]].
<gallery perrow=6>


File:foundationcheatsheet.png|'''Foundation cheatsheet.''' Extracted from electrtical_68 file -[[File:foundationcheatsheet.FCStd]].
File:interiorwall1.png|{{x}}'''Interior Wall 1.''' Naming convention: I1 for Interior 1. Bath Tub 1 wall. Extracted from plumbing_32 file. - [[File:interiorwall1.FCStd]].
File:interiorwall2.png|'''Interior Wall 2.''' Next to tub. Extracted from plumbing_32 file. - [[File:interiorwall2.FCStd]].
File:interiorwall3.png|'''Interior Wall 3 - thin.'''Extracted from electrical_68 file and modified. - [[File:interiorwall3.FCStd]].
File:interiorwall4.png|'''Interior Wall 4 - bath door.''' And 6 is small module on top. Extracted from electrical_69 file and modified. - [[File:interiorwall4.FCStd]].
File:interiorwall5.png|'''Interior Wall 5 - behind washer.''' And 7 is small module on top - [[File:interiorwall5.FCStd]].
File:interiorwall11.png|'''Interior Wall 11 - Kitchen Corner''' PDF Cheatsheet - [[File:seh4interiorwall11cheatsheet.pdf]].
File:interiorwall12.png|'''Interior Wall 12 - Kitchen middle.''' PDF Cheatsheet - [[File:seh4interiorwall12.pdf]].
File:check.png|'''Interior Wall 13 - .''' - [[File:seh4interiorwall13.pdf]].
File:interiorwall16.png|'''Interior Wall 16 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall16.FCStd]].
File:interiorwall17.png|'''Interior Wall 17 and 18. Laundry closet wall.''' - [[File:interiorwall17.FCStd]].
File:interiorwall19.png|'''Interior Wall 19. Laundry closet cap.''' - [[File:interiorwall19.FCStd]].
File:interiorwall20.png|'''Interior Wall 20 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall20.FCStd]].
File:interiorwall21.png|'''Interior Wall 21 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall21.FCStd]].
File:interiorwall22.png|'''Interior Wall 22 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall22.FCStd]].
File:interiorwall23.png|'''Interior Wall 23 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall23.FCStd]].
File:interiorwall24.png|'''Interior Wall 24 - FILL IN DATA.''' FILL IN DATA - [[File:interiorwall24.FCStd]].
File:ventfanlocation.png|'''Vent Fan Location.''' - [[File:ventfanlocation.FCStd]].
</gallery>
</gallery>


===Carport===
==Second Floor Interior==
See [[Seed Eco-Home 2 Carport]]
(8' version is at [[Seed_Home_v2_3D_CAD#Build_Cheatsheets]])
<gallery perrow=6>
<gallery perrow=6>


File:Carportassembly.png|'''Carport assembly.''' - FreeCAD -[[File:Carportassembly.fcstd]]
File:Standardwall.png|'''Standard interior wall.'''   [[File:standardinteriorwall.FCStd]].
 
File:walli8_10.png|'''Interior walls 8-10.''' 2nd floor bathroom. - [[File:walli8_10.FCStd]].
 
</gallery>
 
=First Floor Exterior=
 
<gallery perrow=6>
 
File:positionallycorrectmod1.png|'''Wall Module 1''' SweetHome3D- [[File:seh2wall1.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_1.fcstd]]<br/>[[Build Cheatsheet for Wall Module 1|Build Cheatsheet]]
 
File:seh2wall2.png|'''Wall Module 2''' SweetHome3D- [[File:seh2wall2.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_2.fcstd]]<br/>[[Build Cheatsheet for Wall Module 2|Build Cheatsheet]]
 
File:seh2wall3rework4.png|'''Wall Module 3''' SweetHome3D- [[File:seh2_wall_3.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_3.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_3|Build Cheatsheet]]
 
File:seh2wall4freecad.png|'''Wall Module 4''' SweetHome3D- [[File:seh2_wall_4.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_4.fcstd]]<br/>[[Build_Cheatsheet_for_Wall_Module_4|Build Cheatsheet]]  


File:carportposts.png|'''Carport posts.''' - FreeCAD -[[File:Carport_posts.fcstd]]
File:seh2wall5.png|'''Wall Module 5''' SweetHome3D- [[File:seh2_wall_5.sh3d.zip]]<br/> [[Build_Cheatsheet_for_Wall_Module_5|Build Cheatsheet]]<br/> FreeCAD- [[File:seh2_wall_5.fcstd]] -  Same as Wall Module 17 (opposite long side left corner)


File:carportheight.png|'''Carport height.''' - FreeCAD -[[File:Carport_height.fcstd]]
File:seh2wall6.png|'''Wall Module 6''' SweetHome3D- [[File:seh2_wall_6.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_6.fcstd]] <br/>


File:carportdeck.png|'''Carport Deck.''' - FreeCAD -[[File:Carport_deck.fcstd]]
File:seh2wall7.png|'''Wall Module 7''' SweetHome3D- [[File:seh2_wall_7.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_7.fcstd]]<br/>


</gallery>
File:adjustmentmodule8.png|'''Wall Module 8''' SweetHome3D- [[File:seh2_wall_8.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_8.fcstd]]<br/>  Adjustment module.


===Plumbing Rough-In===
File:seh2wall9.png|'''Wall Module 9''' SweetHome3D- [[File:seh2_wall_9.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_9.fcstd]] <br/>


Note: due to local variations - the actual CAD must reconcile against materials used ([https://photos.app.goo.gl/6Mu2gsXhC9jhsi82A]) and the data collection from annotated PVC pictures at [https://photos.app.goo.gl/8Jqt4scFkxHnM8d59]. This is proper CAD-BOM-Reality reconciliation required for a full digital model.
File:seh2_wall_10.png|'''Wall Module 10''' SweetHome3D- [[File:seh2_wall_10.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_10.fcstd]] <br/>


[[File:secondfloortoilet.png|100px]][[File:bathroomonly2.png|100px]][[File:bathroomonly.png|100px]][[File:foundationonly.png|100px]][[File:wallstarting.png|100px]][[File:finishingplumbing.png|100px]][[File:3sweepelbow.png|100px]][[File:continuinghouse.png|100px]][[File:grading.png|100px]][[File:sinkdrain.png|100px]][[File:tuscany.png|100px]][[File:toilet.png|100px]][[File:drain.png|100px]][[File:cuttrapbottom.png|100px]][[File:cuttraptop.png|100px]][[File:15trap.png|100px]][[File:house3.png|100px]][[File:house2.png|100px]][[File:house.png|100px]][[File:bathroomonslab.png|100px]][[File:drainkit4.png|100px]][[File:drainkit3.png|100px]][[File:drainkit2.png|100px]][[File:drainkit.png|100px]][[File:15elbow.png|100px]]
File:Seh2 wall 11.png|'''Wall Module 11''' SweetHome3D- [[File:seh2_wall_11.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_11.fcstd]]<br/>


<gallery perrow=6>
File:seh2wall12.png|'''Wall Module 12''' SweetHome3D- [[File:seh2_wall_12.sh3d.zip]] <br/>FreeCAD- [[File:seh2_wall_12.fcstd]]<br/> . Structure same as Module 23.


File:bathroomonly.png|'''Plumbing on slab.''' This can be merged with foundation. FreeCAD -[[File:Plumbing_on_slab.fcstd]]
File:seh2wall1freecad.png|'''Wall Module 13''' SweetHome3D- [[File:seh2_wall_13.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_13.fcstd]] <br/> Same as Wall 1 structure. But - Wall 1 has a hole for electrical.


File:secondfloortoilet.png|'''Second Floor Toilet Beginning.'''. FreeCAD -[[File:secondfloortoilet.fcstd]]
File:seh2wall14.png|'''Wall Module 14''' SweetHome3D- [[File:seh2_wall_14.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_14.fcstd]]<br/>


File:3sweepelbow.png |'''3" sweep elbow for toilet.''' - FreeCAD -[[File:3sweepelbow.fcstd]]
File:seh2wall15.png|'''Wall Module 15''' SweetHome3D- [[File:seh2_wall_15.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_15.FCStd]]<br/>


File:grading.png |'''House drainage slope.''' Codes say 6" over 10'. - FreeCAD -[[File:grading.fcstd]]
File:Seh2wall16.png|'''Wall Module 16''' SweetHome3D- [[File:seh2_wall_16.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_16.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_16|Build Cheatsheet]] Same structure as Module 4.


File:tuscany.png |'''Tuscany toilet.''' - FreeCAD -[[File:tuscany.fcstd]]
File:seh2wall17.png|'''Wall Module 17''' SweetHome3D- [[File:seh2_wall_17.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_17.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_17|Build Cheatsheet]]  


File:cuttraptop.png |'''Cut trap bottom, 1.5".''' - FreeCAD -[[File:cuutrapbottom.fcstd]]
File:smallwindow3.png|'''Wall Module 18''' SweetHome3D- [[File:seh2_wall_18.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_18.fcstd]] <br/>[[B:uild_Cheatsheet_for_Wall_Module_18|Build Cheatsheet]] 1st story window module.


File:cuttrapbottom.png |'''Cut trap top, 1.5".''' - FreeCAD -[[File:cuutraptop.fcstd]]
File:smallwindow3.png|'''Wall Module 19''' SweetHome3D- [[File:seh2_wall_19.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_19.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_19|Build Cheatsheet]] First story window module. Structure same as 18.


File:15trap.png |'''1.5" PVC Trap.''' - FreeCAD -[[File:15trap.fcstd]]
File:Seh2wall20.png|'''Wall Module 20''' SweetHome3D- [[File:seh2_wall_20.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_20.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_20|Build Cheatsheet]]
File:seh2_wall_21.png|'''Wall Module 21''' SweetHome3D- [[File:seh2_wall_21.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_21.fcstd]]<br/> [[Build_Cheatsheet_for_Wall_Module_21|Build Cheatsheet]]  


File:bathroomonslab.png |'''Bathroom on slab.''' - FreeCAD -[[File:bathroomonslab.fcstd]]
File:frenchdoorexteriortrimdetail.png|'''Wall Module 22''' SweetHome3D- [[File:seh2_wall_22.sh3d.zip]]<br/>FreeCAD- [[File:seh2_wall_22.fcstd]]<br/>  Note: FreeCAD file is updated, SH3D is older


File:drainkit4.png |'''Tub drain kit''' - FreeCAD -[[File:tubdrainkit.fcstd]]
File:seh2wall23.png|'''Wall Module 23''' FreeCAD- [[File:seh2_wall_23.fcstd]]<br/>


File:15elbow.png |'''1.5" elbow''' - FreeCAD -[[File:15elbow.fcstd]]
</gallery>
</gallery>


===Plumbing Final===
=Second Floor Exterior - 9' Version=
'''See more at [[SEH 2 KItchen and Bathroom Part Library]] - latest work from March 2022'''
 
'''See also - Computer Generated 2nd Floor Exterior Wall Modules by Coderjeff'''
Master files for both 8' and 9' walls with detailed parts - [[Coderjeff 2nd Floor Exterior]].
<gallery perrow=6>
 
File:seh2_9ft_short_left_corner.png|'''Wall Module 24''' <br/>FreeCAD- [[File:seh2_wall_24.fcstd]]<br/> 
 
File:seh2_9ft_panel.png|'''Wall Module 25''' <br/>FreeCAD- [[File:seh2_wall_25.fcstd]]<br/> 
 
File:Upperdoorupdate.png|'''Wall Module 26 - second story door''' <br/>FreeCAD- [[File:seh2_wall_26.fcstd]] <br/>


[[File:plumbingfinal.png|200px]]
File:seh2_9ft_short_right_corner.png|'''Wall Module 27''' <br/>FreeCAD- [[File:seh2_wall_27.fcstd]]<br/> 


<gallery perrow=6>
File:seh2_9ft_long_left_corner.png|'''Wall Module 28''' <br/>FreeCAD- [[File:seh2_wall_28.fcstd]]<br/> 


File:finishplumbing.png |'''2 Story Plumbing.''' From 2021 - FreeCAD -[[File:2storyplumbing.fcstd]]
File:seh2_9ft_panel.png|'''Wall Module 29''' <br/>FreeCAD- [[File:seh2_wall_29.fcstd]]<br/>
</gallery>


===Electrical===
File:seh2_9ft_panel.png|'''Wall Module 30''' <br/>FreeCAD- [[File:seh2_wall_30.fcstd]]<br/> 


See [[SEH 2 Electrical Design]] for files from May 2022.
File:seh2_9ft_panel.png|'''Wall Module 31''' <br/>FreeCAD- [[File:seh2_wall_31.fcstd]]<br/>  File:seh2wall32.png|'''Wall Module 32''' <br/>FreeCAD- [[File:seh2_wall_32.fcstd]]<br/> 


==BOM==
File:seh2_9ft_panel.png|'''Wall Module 33''' <br/>FreeCAD- [[File:seh2_wall_33.fcstd]]<br/> 
*4x3 closet bend is recommended [https://terrylove.com/forums/index.php?threads/4x3-inch-closet-bend-or-3-inch-closet-bend.2826/] - so get one at [https://www.menards.com/main/plumbing/rough-plumbing/pipe-tubing-hoses-fittings-accessories/fittings/pvc-fittings/pvc-dwv-fittings/nibco-reg-4x3-closet-elbow-pvc-dwv/p-1444449182622-c-9383.htm]


=Catarina's Source Google Drive, Sweet Home 3D Files=
File:seh2_9ft_panel.png|'''Wall Module 34''' <br/>FreeCAD- [[File:seh2_wall_34.fcstd]]<br/> 
File:seh2_9ft_long_right_corner.png|'''Wall Module 35''' <br/>FreeCAD- [[File:seh2_wall_35.fcstd]]<br/> 


*Laundry module - [https://drive.google.com/file/d/1zjWbmlwpjXy4DUW1xlzSzDnDrqDglsUs/view?usp=sharing]
File:seh2_9ft_short_left_corner.png|'''Wall Module 36''' <br/>FreeCAD- [[File:seh2_wall_36.fcstd]]<br/> 
*Drive, OBI Models - [https://drive.google.com/drive/folders/0B0NG-lv1ELQvdE9xSGZEeWR3Mm8]
**'''CAD, Rosebud, Working Model as of 5/14/21''' [https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view?usp=sharing]
**'''CAD, Supporting Rosebud Model Files''' - [https://drive.google.com/drive/folders/1ELOrXeIenMNjfYwr6g5HUqoNjGqA38DF]
*Building Book - [Technical designs are found in the Building Book - [https://drive.google.com/drive/folders/1SZrTCkX9S_L8JSD_Dq_xeLDM53MP2vZq]
*Shower drain kit - dimensions - [https://images.homedepot-static.com/catalog/pdfImages/cd/cd10c1ce-fd8e-4efc-8415-60dc104f5090.pdf]


'''Visual History:'''  
File:seh2_9ft_panel.png|'''Wall Module 37''' <br/>FreeCAD- [[File:seh2_wall_37.fcstd]]<br/> 


[[File:staironly.png|100px]][[File:floorandroof.png|100px]][[File:stairs2.png|100px]][[File:stairs.png|100px]][[File:staircase.png|100px]][[File:rooflayers.png|100px]]
File:seh2_9ft_panel.png|'''Wall Module 38''' <br/>FreeCAD- [[File:seh2_wall_38.fcstd]]<br/> 


'''Gallery:'''
File:seh2_9ft_short_right_corner.png|'''Wall Module 39''' <br/>FreeCAD- [[File:seh2_wall_39.fcstd]]<br/> 


<gallery perrow=6>
File:seh2_9ft_long_left_corner.png|'''Wall Module 40'''<br/>FreeCAD- [[File:seh2_wall_40.fcstd]]<br/> 


File:staironly.png|'''Stairs only, 1/10 scale.''' - FreeCAD - [[File:staironly.fcstd]].
File:seh2wall41.png|'''Wall Module 41''' <br/>FreeCAD- [[File:seh2_wall_41.fcstd]]<br/> 


File:rooflayers.png|'''Roof layers.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].
File:seh2wall42.png|'''Wall Module 42''' <br/>FreeCAD- [[File:seh2_wall_42.fcstd]]<br/> 


File:staircase.png|'''Staircase. Technical detail.''' - SweetHome3D -[https://drive.google.com/file/d/1t9PQIM0JRXRPsQ6aqhsMETB53VRYnqgL/view?usp=sharing].
File:seh2_9ft_panel.png|'''Wall Module 43''' <br/>FreeCAD- [[File:seh2_wall_43.fcstd]]<br/> 


File:stairs.png|'''Stairs. Early concept detail.''' - SweetHome3D -[https://drive.google.com/file/d/1HFNCDa2t4rpEKunZowZ8d9cRtb9EF2li/view?usp=sharing].
File:seh2_9ft_panel.png|'''Wall Module 44''' <br/>FreeCAD- [[File:seh2_wall_44.fcstd]]<br/> 
File:seh2wall45.png|'''Wall Module 45''' <br/>FreeCAD- [[File:seh2_wall_45.fcstd]]<br/> 


File:stairs2.png|'''Stairs. Correct for Aspen.''' - SweetHome3D -[https://drive.google.com/file/d/1-X9sJiHt2KS7ZrOPAeNj0VC2UQlKELNT/view?usp=sharing].


File:floorandroof.png|'''Technical of floor and roof.''' - SweetHome3D -[https://drive.google.com/file/d/1NwTBIXWGccA1IjvYYsodfYMxFcLp2BII/view?usp=sharing].
File:seh2wall46.png|'''Wall Module 46''' <br/>FreeCAD- [[File:seh2_wall_46.fcstd]]<br/> 
File:seh2_9ft_long_right_corner.png|'''Wall Module 47'''<br/>FreeCAD- [[File:seh2_wall_47.fcstd]]<br/> 


</gallery>
</gallery>


=Technical Modules=
=Plumbing Final=
==Stair Design==
'''See more at [[SEH 4 Plumbing]] - latest work from March 2022 onwards, needs update for 9' walls.'''
#Please download SweetHome3D to view this file - https://drive.google.com/file/d/1X7H-kKLtFZrs0y3Qwq7GYdgxnL4wskm5/view?usp=sharing
#Determine the correct stair height, and then the landing is like in this concept model - https://drive.google.com/file/d/1X4dHvEETeuBPjB34wXJ-mqc97YHgaWai/view
#Then do the staircase in FreeCAD, which I started here - https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules


[[File:stairstringer2.png|100px]][[File:stairstringer.png|100px]]
=Electrical=


'''Gallery:'''
See [[SEH 4 Electrical]]
 
=Stairs=
 
https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules


<gallery perrow=6>
<gallery perrow=6>


File:stairstringer2.png|'''Stair stringer with steps, no nosing.''' Generate technical drawing with TechDraw. FreeCAD -[[File:stairstringer.fcstd]].  
File:stairstringer2.png|'''Stair stringer with steps, no nosing.''' . FreeCAD -[[File:stairstringer.fcstd]]<br/> '''[[File:SEH4StringerCheatsheet.pdf]]'''.  


</gallery>
</gallery>


Also - See [[Stairs]]
Also - See [[Stairs]]
Line 418: Line 534:


File:mudsillanchor2.png|'''Mudsill anchor.''' - FreeCAD -[[File:mudsillanchor.fcstd]]
File:mudsillanchor2.png|'''Mudsill anchor.''' - FreeCAD -[[File:mudsillanchor.fcstd]]
File:rigidinsulpattern.png|'''Insulation pattern.''' Not rotated or positioned. - [[File:roofinsulpattern.fcstd]].


</gallery>
</gallery>
=Foundation=
*From Catarina's folder - [https://drive.google.com/drive/folders/1xSnyMbsy6p_CJyLyHREWOhdzr2-UoSYv]
*More at [[Seed Eco-Home 4 3D CAD#Whole House Views]] and [[Seed Eco-Home 4 3D CAD#Select Details]]
[[Category: Seed Eco-Home]] [[Category: Seed Eco-Home 4]]

Latest revision as of 03:58, 25 February 2026

Master Files

CM

  • SEH Trellis
  • Check.png1300 + 2000 sf - [21]. Interior concept as to be built - 1.3k WHITE at [22].
    • Cabinets detail - It is found under OBI -> Designs -> Seed Home 2-> Rosebud 3 -> CAD -> Technical -> Interior Assemblies -> Kitchen. [23]
  • 1300 deco trellis technical [24]
  • The only place that shows the Trellis Top Band is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [25]

RH

SH4 Maysville Files

Tools

Module Generator

See FreeCAD Module Generator

Apertures

Quad Modules - Modules with Structure + MEP


Select Details

Second Floor Interior

First Floor Interior

HintLightbulb.png Hint: The first floor exterior walls sit on the sill so the interior walls start 1.5" lower. These panels have been designed to use 106.125" studs (1.5" longer than standard pre-cut studs) so they will be the same height as the exterior walls when they are in place. The utility channel spacers are also raised 1.5" to be at the same height as in the exterior walls

Build Cheatsheets

HintLightbulb.png Hint: Drawing Dimensioning Workbench is no longer maintained/updated by FreeCAD, though it is still fine to use. The supported workbench is called TechDraw.
FreeCAD Wiki

Protocol: Note that only single objects can be used in dimensional drawings with the Drawing Dimensioning workbench. For complex assemblies, simply collapse into simple copies of compounds - or compound STEP exports (to turn them into simple solids). As such - take master files - take the necessary selection - and turn into one dumb object. Then you can get nice dimensions. Save the file with teh pages included - pages with dimensions show up in another tab, though.


Whole House Views

(moved 1000 sf version to Savannah SH 5)

Exterior Walls

HintLightbulb.png Hint: Use PDF Files, not PNG Thumbnails for module drawings. Verify with crew leader that the drawing is correct before assembling

First Floor Interior

Second Floor Interior

(8' version is at Seed_Home_v2_3D_CAD#Build_Cheatsheets)

First Floor Exterior

Second Floor Exterior - 9' Version

See also - Computer Generated 2nd Floor Exterior Wall Modules by Coderjeff Master files for both 8' and 9' walls with detailed parts - Coderjeff 2nd Floor Exterior.

Plumbing Final

See more at SEH 4 Plumbing - latest work from March 2022 onwards, needs update for 9' walls.

Electrical

See SEH 4 Electrical

Stairs

https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules

Also - See Stairs

Stairs example.png


Foundation

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Seed_Eco-Home_4_3D_CAD&oldid=320451"