Seed Eco-Home 4 3D CAD: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(190 intermediate revisions by 3 users not shown)
Line 6: Line 6:


=CM=
=CM=
*1300 + 2000 sf - [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]
*[[SEH Trellis]]
*{{check}}1300 + 2000 sf - [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Interior concept as to be built - 1.3k WHITE at [https://drive.google.com/drive/folders/1534QkF8WfZwMUOwwJ_Gp6S7zaT9K0Hf9].
**Cabinets detail - It is found under OBI -> Designs -> Seed Home 2-> Rosebud 3 -> CAD ->  Technical -> Interior Assemblies -> Kitchen. [https://drive.google.com/drive/folders/1zPmdJvAnxawWzvSbX51Jj-0y96LjucdQ]
*1300 deco trellis technical [https://drive.google.com/drive/folders/1TPDGyB-GeoLM0HlHd1OCRSBeVAv7IePa]
*The only place that shows the '''Trellis Top Band''' is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [https://drive.google.com/drive/folders/1ewZECHV3UEUlr1sZoUtx-AmjUFTM4s_1]


=RH=
=RH=
*Google Drive - [https://drive.google.com/drive/folders/18afuCN4ttRhoXMgm-Bc2TD4N2Ndjmh2M]
*Google Drive - [https://drive.google.com/drive/folders/18afuCN4ttRhoXMgm-Bc2TD4N2Ndjmh2M]
=SH4 Maysville Files=
<gallery perrow=6>
File:Shr.png|'''Seed Eco-Home 4 Maysville build.''' Catarina working file- [https://drive.google.com/file/d/144Nv-Esxe3_kN4BwLTOm7HYDOBJqvu0S/view]
File:interiormodules.png|'''Interior Modules.''' [[File:interiormodules.fcstd]]
File:moduleI1.png|'''Interior module I1.''' [[File:moduleI1.fcstd]]
File:module48.png|'''Wall module 48.''' Corner. [[File:module48.fcstd]]
</gallery>
=Tools=
<gallery perrow=6>
File:dewalt65cordlesscircular.png|'''Dewalt Cordless Circular Saw 6.5".''' Tool only.- FreeCAD -[[File:dewalt65circular.fcstd]].
File:interiorwalljig.png|'''Interior wall and door modules jig'''- FreeCAD -[[File:Sh4interiorwalljig.fcstd]].
</gallery>
=Module Generator=
See [[FreeCAD Module Generator]]
<gallery perrow=6>
File:beadboardgen.png|'''Interior sheathing generator.''' - FreeCAD -[[File:beadboardgen.fcstd]].
File:nailingboardgen.png|'''Nailing board.''' - FreeCAD -[[File:nailingboardgen.fcstd]].
File:customblockinggen.png|'''Custom blocking.''' For mounting all types of devices. FreeCAD -[[File:customblockinggen.fcstd]].
File:exteriorblockinggen.png|'''Exterior blocking.''' Creates first or second floor blocking. Corrects for 2nd floor window lowering. Allows corners. FreeCAD -[[File:exteriorblockinggen.fcstd]].
File:ladderblockinggen.png|'''Ladder blocking Module generator.''' To use - toggle the folder you need in the part tree. FreeCAD -[[File:ladderblockinggen.fcstd]].
File:doormodulegen.png|'''Interior Door Module generator.''' - FreeCAD -[[File:custominteriordoorgen.fcstd]].
File:utechanblocking.png|'''Utility channel blocking generator.''' Includes proper shortening of blocking- FreeCAD -[[File:utechanblockinggen.fcstd]]. 2x4 or other lumber selection for the wall type. Blocking itself is 2x4.
File:mainframinggen.png|'''Main framing generator.''' - FreeCAD -[[File:mainframinggenerator.fcstd]]. First, main structural submodule. Divided into submodules as in working doc [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g23da8acac2c_0_119]
File:check.png|'''Monolithic house design kernel - module generation''' - FreeCAD -[[File:Modulegenerator.fcstd]]. Took it as far as spreadsheet broke. Divided into submodules as in working doc [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g23da8acac2c_0_119]
</gallery>
=Apertures=
<gallery perrow=6>
File:module48aperture.png|'''Module 48 main wire channel notch.''' FreeCAD -[[File:module48aperture.fcstd]].
</gallery>
=Quad Modules - Modules with Structure + MEP=
<gallery perrow=6>
File:quad37.png|'''Exterior Wall 37.''' With main stack vent and bath vent.  [[File:Exteriorwall37.FCStd]].'''
File:modulei2.png|'''Module i2.''' See also [[Water Heater Cabinet]]. FreeCAD -[[File:modulei2.fcstd]]
File:modulei1.png|'''Module i1.''' FreeCAD -[[File:modulei1.fcstd]].
File:check.png|'''Module 14.'''FreeCAD -[[File:module14.fcstd]]. Master file at Gitlab - [https://wiki.opensourceecology.org/wiki/File:Module14.fcstd].
File:subpanelinstall.png|'''Module 4 - Subpanel install.''' FreeCAD -[[File:subpanelinstall.fcstd]].
File:module15.png|'''Module 15.'''FreeCAD -[[File:module15.fcstd]].
</gallery>


=Master Files=
=Master Files=
<gallery perrow=6>
<gallery perrow=6>
File:Cabinetsasbuilt.png|'''Cabinets as built.''' - [[File:Kitchencabbom.fcstd]].


File:seh4foundationplumbing.png|'''Seed Eco-Home Foundation Plumbing.''' FreeCAD- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/plumbing_rough-in_1.fcstd]
File:masterelectrical.png|'''Master electrical + Electrical Boxes.''' - [[SH4_Electrical_Part_Library]]. Also '''Electrical Design.''' See [[SEH 4 Electrical]] with Maysville content in work doc.  


File:housewithpv.png|'''House with PV.''' FreeCAD- [[File:housewithpv.fcstd]] - incomplete. Final submitted for engineering - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_15.fcstd]. IFC export - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/Seed_Eco-Home_082922.ifc]. '''Update with new PV panels and hybrid inverter system [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_16.fcstd]'''
File:seh2_plumbing.png|'''Seed Eco-Home Plumbing.''' Working doc is good - see [[SEH 4 Plumbing]] - CAD needs update. '''Subassemblies''' started at  [[Seed_Eco-Home_4_3D_CAD#Select_Details]]
File:seh2_watersystem.png|'''Seed Eco-Home Water Supply.''' Gitalb, almost positionally correct - [https://gitlab.com/marcin_ose/seh-2-water-system/-/tree/main/#modal-upload-blob]. File with 5 components but not fittings: [[File:seh2_watersystem.fcstd]].


File:seh2_plumbing.png|'''Seed Eco-Home Plumbing.''' See [[SEH 4 Plumbing]]
File:seh4foundationplumbing.png|'''Seed Eco-Home Foundation Plumbing.''' FreeCAD- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/plumbing_rough-in_1.fcstd]


File:seh2_watersystem.png|'''Seed Eco-Home Water Supply.''' FreeCAD with fittings - [https://gitlab.com/marcin_ose/seh-2-water-system/-/blob/main/seh2_water-system_4.fcstd] and one-item part tree - [https://gitlab.com/marcin_ose/seh-2-water-system/-/tree/main/#modal-upload-blob]. File with 5 components but not fittings: [[File:seh2_watersystem.fcstd]].
File:utewallassy.png|'''Utility Wall assembly.''' Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -[[File:utewallassy.fcstd]]  


File:electrical.png |'''Electrical Design.''' See [[SEH 4 Electrical]].
File:housewithpv.png|'''House with PV SH2 version.''' FreeCAD- [[File:housewithpv.fcstd]] - incomplete. Final submitted for engineering - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_15.fcstd]. IFC export - [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/Seed_Eco-Home_082922.ifc]. '''Update with new PV panels and hybrid inverter system [https://gitlab.com/opensourceecology.org/seh-2-electrical/-/blob/main/roof_file_16.fcstd]'''. No top trellis trim band. But, all above is 1000 sf. 1300 sf is [https://drive.google.com/file/d/144Nv-Esxe3_kN4BwLTOm7HYDOBJqvu0S/view].


File:pvpanelmounting.png|'''PV panel mounting.''' FreeCAD- [[File:pvpanelmounting.fcstd]]
File:pvpanelmounting.png|'''PV panel mounting.''' Seed Eco-Home 2 version. FreeCAD- [[File:pvpanelmounting.fcstd]]


File:taperedroof.png|'''Tapered roof.''' FreeCAD- [[File:taperedroof.fcstd]]
File:taperedroof.png|'''Tapered roof.''' FreeCAD- [[File:taperedroof.fcstd]]
Line 30: Line 113:
File:modularcarport.png|'''Modular Carport.''' FreeCAD- [[File:modularcarport.fcstd]]
File:modularcarport.png|'''Modular Carport.''' FreeCAD- [[File:modularcarport.fcstd]]


File:utewallassy.png|'''Utility Wall assembly.''' Taken to Gitlab - [https://gitlab.com/marcin_ose/seh-2-kitchen-bathroom/-/tree/main]. After 1 MB on the wiki the plumbing part is split into the next file. FreeCAD -[[File:utewallassy.fcstd]]
File:Cabdsafsdf.png|'''Cabinets.''' - Not as built. Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Cabinets all - [[File:cabinets.fcstd]]. Cabinets pieces - [https://drive.google.com/drive/folders/19EANcq4E827mSh9vi0KCdMbK9KoncBlp]
 
File:Cabdsafsdf.png|'''Cabinets.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc]. Cabinets all - [[File:cabinets.fcstd]]. Cabinets pieces - [https://drive.google.com/drive/folders/19EANcq4E827mSh9vi0KCdMbK9KoncBlp]


File:Seh2.jpg|'''Catarina's FreeCAD 2022.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc].  
File:Seh2.jpg|'''Catarina's FreeCAD 2022.''' - Catarina's FreeCAD source including Rosebud-SeedA-v2.fcstd is at [https://drive.google.com/drive/folders/1oZbCraJbY7wyzI6jr9NU8uFJBYRjYnrc].  
Line 54: Line 135:


<gallery perrow=6 >
<gallery perrow=6 >
File:tubframing.png|'''Tub framing.''' - [[File:tubframing.fcstd]]
File:sh4stairs.png|'''Stair design for Seed Eco-Home 4''' - [[File:sh4stairs.fcstd]]
File:stackmount.png|'''Main vent stack mount blocking.''' - [[File:stackmount.fcstd]]
File:escutcheon.png|'''Esutcheon for 2" IPS/PVC/Iron.''' - [[File:escutcheon.fcstd]]
File:stringer.png|'''Stair stringer.''' - [[File:stairstringer.fcstd]]
File:venthoodcab.png|'''Vent hood cabinet.''' - [[File:venthoodcab.fcstd]]
File:intwinassy.png|'''Interior Window Assembly.''' - [[File:intwinassy.fcstd]]
File:floor1sill.png|'''Floor 1 sills + apertures.''' - [[File:floor1sill.fcstd]]
File:floor2sill.png|'''Floor 2 sills + apertures.''' - [[File:floor2sill.fcstd]]
File:doublesinkplumbing.png|'''Double sink plumbing.''' - Gitlab- [https://gitlab.com/opensourceecology.org/SEH_4_Plumbing/-/blob/main/Double_Sink_Dim_Drawing.fcstd]
File:sinkplumbing.png|'''Sink plumbing.''' - [[File:sinkplumbing.fcstd]]
File:toilet2plumbing.png|'''2nd Floor Toilet plumbing.''' - [[File:toilet2plumbing.FCStd]]
File:module67beadboard.png|'''Module 67 beadboard''' [[File:module67beadboard.fcstd]]
File:powercenterextblockinginside.png|'''Power Center Exterior Blocking -''' but looking from the inside. Has stud holes for PV LFMC. [[File:powercenterextblockinginside.fcstd]]
File:powercenterintblocking.png|'''Power Center Interior Blocking.''' Has stud holes for PV LFMC.[[File:powercenterintblocking.fcstd]]
File:powercenterextblocking.png|'''Power Center Exterior Blocking.''' Does not have stud holes for PV. [[File:powercenterextblocking.fcstd]]
File:mainvent.png|'''Main vent.''' Near positionally correct. [[File:Mainvent.fcstd]]
File:heatpumpthru.png|'''Heat pump through-tube geometry.''' [[File:heatpumpthru.fcstd]]
File:heatpumpinterface.png|'''Heat pump interface plate.''' Includes tech drawing. [[File:heatpumpinterfaceplate.fcstd]]
File:heatpumpdownspout.png|'''Heat pump downspout detail.''' [[File:heatpumpdownspout.fcstd]]
File:heatpump24000.png|'''Heat pump mounting for 24000 BTU Heat Pump.''' Also found in [[SH4 Electrical Part Library]]. - [[File:heatpump24000.fcstd]]
File:deck.png|'''Front deck, floating.''' [https://drive.google.com/file/d/1s8XA6LmkRlaGqGlI9IY0wGp79pxVV2Lj/view]. Technical drawing: [[File:deck.fcstd]]
File:retainingwall.png|'''Retaining wall.''' [[File:retainingwall.fcstd]]
File:turningradius.png|'''Walkway + Driveway turning radius''' [[File:turningradius.fcstd]]
File:module4beadboard.png|'''Module 4 beadboard''' [[File:module4beadboard.fcstd]]
File:pvdcdiscoblocking.png|'''PV DC Disconnect Blocking''' [[File:pvdcdiscoblocking.fcstd]]
File:sewertap.png|'''Sewer Ta[-''' 4" pipe onto 6" pipe. [[File:sewertap.fcstd]]
File:gravelbox.png|'''Gravel box.''' [[File:gravelbox.fcstd]]
File:windowboxes.png|'''Window boxes.''' [[File:windowboxes.fcstd]]
File:windowtrim.png|'''Window trim.''' Next step is to add stained pieces around. [[File:windowtrim.fcstd]]
File:wallmodule67.png|'''[[Electrical part library]].'''
File:waterexpansiontank.png|'''Water expansion tank''' - [[File:waterexpansiontank.fcstd]]
File:wanxiang.png|'''Wanxiang 230W PV Panels  -28 panel array'''  Array, positionally correct X,Y - 1" off on Z. - [[File:wanxiang230.FCStd]]
File:panelmounting.png|'''Wanxiang 230W PV Panels.''' Single panel. Includes tech drawing of back mount - [[File:panelmounting.FCStd]]
File:PVpanelmountingcad.png|'''PV Panel mounting CAD.''' Not positionally correct in Z direction, ok in X, Y - [[File:PVpanelmountingcad.FCStd]]
File:Powerladderangles.png|'''Power ladder angles.''' [[File:powerladderangles.fcstd]]. Source - [[File:28ladder.FCStd]]
File:gravellock.png|'''Gravel lock.''' Merge with main Maysville 2023 file. [[File:gravellock.fcstd]]
File:trellisbandgeo.png|'''Trellis band geometry.''' - [[File:trellisbandgeo.fcstd]]
File:fronttrellisassy.png|'''Front Trellis Assembly.''' Includes production drawing.- [[File:fronttrellisassy.fcstd]]
File:trellisinstall.png|'''Front Trellis inatallation geometry.''' - [[File:trellisinstall.fcstd]]
File:lefttrellisassy.png|'''Left Trellis Assembly.''' - [[File:lefttrellisassy.fcstd]]
File:vinylaiding.png|'''Vinyl siding.''' - [[File:vinylsiding.fcstd]]
File:integratedwindowtrim.png|'''Window trim integrated with J-Channel.''' For 2nd floor windows. - [https://drive.google.com/u/1/uc?id=1OwYPNDRCBJZCHfnyurYE55M9WS42CH9s&export=download]. Each layer is in separate files: [[File:topwindowinnertrimframe.fcstd]]
File:windowboxes.png|'''Trim with window boxes.''' - [[File:windowboxes.fcstd]]
File:correctiontrim.png|'''French door plumb correction trim.''' - [https://drive.google.com/file/d/17FYxVrwIPDoYF_tbtTAPnVDkDhFQmUP4/view?ts=63f415d8]
File:foundationflashing.png|'''Foundation flashing geometry.''' - [[File:foundationflashing.FCStd]]
File:railingprofile.png|'''Railing Profile.'''  [[File:railingprofile.fcstd]].
File:garageheader.png|'''Garage Header.'''  [[File:garageheader.fcstd]].
File:exteriortrim.png|'''Exterior trim.'''  [[File:exteriortrim.fcstd]].
File:hurricanetiesongarage.png|'''Hurricane ties on garage.''' Detail for 2 next to each other. See [https://docs.google.com/presentation/d/190GoVHzn9EBOiRwn0Oj8toZDyr8bd9sYemN50wrJrfg/edit#slide=id.g1c4d1fcf8a6_0_95 work doc]. [[File:hurricanetiesongarage.fcstd]].


File:livingroomcircuit.png|'''Living room circuit.'''  [[File:livingroomcircuit.fcstd]].  
File:livingroomcircuit.png|'''Living room circuit.'''  [[File:livingroomcircuit.fcstd]].  
Line 99: Line 289:


<gallery perrow=6>
<gallery perrow=6>
File:secondfloorinterior.png|'''Second floor interior walls.'''   [[File:secondfloorinterior.FCStd]].
File:secondfloorinterior.png|'''Second floor interior walls.''' Not. [[File:secondfloorinterior.FCStd]].
 
File:2ndflbathtubwall.png|'''Second story bath tub wall.'''  [[File:2ndfloorbathtubwall.FCStd]].
 
File:Standardwall.png|'''Standard interior wall.'''  [[File:standardinteriorwall.FCStd]].
 
File:2ndflbathwall.png|'''Second floor bathroom door. Thin side towards exterior wall.''' Module I20 by build order. [[File:2ndfloorbathdoor.fcstd]]
 
File:2ndflbathdoor.png|'''Second floor bathroom corridor wall.''' [[File:2ndfloorbathwall.fcstd]]
 
File:modulei23_26.png|'''Modules 23, and 26.''' [[File:modulei23_26.fcstd]]


File:modulei25.png|'''Module i25 - corner by stairway and bedroom 2 door.''' [[File:modulei25.fcstd]]
File:modulei27.png|'''Module i27 - stairway corner of bedroom 2.''' [[File:modulei27.fcstd]]
File:modulei28.png|'''Module i28 - stairway head wall.''' [[File:modulei28.fcstd]]
File:modulei32.png|'''Module i32 and i22. - Bedroom door.''' Same for 2 doors. [[File:modulei32.fcstd]]
File:modulei24.png|'''Wall module i24. Front bedroom dividing wall.''' [[File:modulei24.fcstd]]
File:modulei9_15.png|'''Wall module i9, i14, and i15.''' Bedroom wall behind tub, and sink walls. Added i14 to this as these are all the same. [[File:modulei9_15.fcstd]]
File:modulei10_16.png|'''Wall module i10 and i16.''' Last bedroom-bathroom wall. [[File:modulei10_16.fcstd]]


</gallery>
</gallery>
Line 154: Line 321:


==Exterior Walls==
==Exterior Walls==
{{Hint|Use PDF Files, not PNG Thumbnails for module drawings. Verify with crew leader that the drawing is correct before assmebling}}
{{Hint|Use PDF Files, not PNG Thumbnails for module drawings. Verify with crew leader that the drawing is correct before assembling}}
<gallery perrow=6>
<gallery perrow=6>
File:exteriorwall1.png|'''Exterior Wall 1.''' Build cheatsheet.  [[File:exteriorwall1.FCStd]] '''[[File:SEH4exteriorwall1.pdf]]'''.
File:exteriorwall1.png|'''Exterior Wall 1.''' Build cheatsheet.  [[File:exteriorwall1.FCStd]] '''[[File:SEH4exteriorwall1.pdf]]'''.
Line 192: Line 359:
File:exteriorwall35.png|'''Exterior Wall 35.''' Build cheatsheet.  [[File:Exteriorwall35.FCStd]].'''[[File:SEH4Exteriorwall35.pdf]]'''
File:exteriorwall35.png|'''Exterior Wall 35.''' Build cheatsheet.  [[File:Exteriorwall35.FCStd]].'''[[File:SEH4Exteriorwall35.pdf]]'''
File:exteriorwall36.png|'''Exterior Wall 36.''' Build cheatsheet.  [[File:Exteriorwall36.FCStd]].'''[[File:SEH4Exteriorwall36.pdf]]'''
File:exteriorwall36.png|'''Exterior Wall 36.''' Build cheatsheet.  [[File:Exteriorwall36.FCStd]].'''[[File:SEH4Exteriorwall36.pdf]]'''
File:exteriorwall37.png|'''Exterior Wall 37.''' Build cheatsheet.  [[File:Exteriorwall37.FCStd]].'''[[File:SEH4Exteriorwall37.pdf]]'''
 
File:exteriorwall38.png|'''Exterior Wall 38.''' Build cheatsheet.  [[File:Exteriorwall38.FCStd]].'''[[File:SEH4Exteriorwall38.pdf]]'''
File:exteriorwall38.png|'''Exterior Wall 38.''' Build cheatsheet.  [[File:Exteriorwall38.FCStd]].'''[[File:SEH4Exteriorwall38.pdf]]'''
File:exteriorwall39.png|'''Exterior Wall 39.''' Build cheatsheet.  [[File:Exteriorwall39.FCStd]].'''[[File:SEH4Exteriorwall39.pdf]]'''
File:exteriorwall39.png|'''Exterior Wall 39.''' Build cheatsheet.  [[File:Exteriorwall39.FCStd]].'''[[File:SEH4Exteriorwall39.pdf]]'''
Line 375: Line 542:


</gallery>
</gallery>
=Foundation=
*From Catarina's folder - [https://drive.google.com/drive/folders/1xSnyMbsy6p_CJyLyHREWOhdzr2-UoSYv]
*More at [[Seed Eco-Home 4 3D CAD#Whole House Views]] and [[Seed Eco-Home 4 3D CAD#Select Details]]
[[Category: Seed Eco-Home]] [[Category: Seed Eco-Home 4]]

Latest revision as of 01:36, 20 May 2025

Working Doc

edit

CM

  • SEH Trellis
  • Check.png1300 + 2000 sf - [21]. Interior concept as to be built - 1.3k WHITE at [22].
    • Cabinets detail - It is found under OBI -> Designs -> Seed Home 2-> Rosebud 3 -> CAD -> Technical -> Interior Assemblies -> Kitchen. [23]
  • 1300 deco trellis technical [24]
  • The only place that shows the Trellis Top Band is the 1000 SF model named Rosebud 3 - Seed - v1.fcstd - [25]

RH

SH4 Maysville Files

Tools

Module Generator

See FreeCAD Module Generator

Apertures

Quad Modules - Modules with Structure + MEP

Master Files

Select Details

Second Floor Interior

First Floor Interior

HintLightbulb.png Hint: The first floor exterior walls sit on the sill so the interior walls start 1.5" lower. These panels have been designed to use 106.125" studs (1.5" longer than standard pre-cut studs) so they will be the same height as the exterior walls when they are in place. The utility channel spacers are also raised 1.5" to be at the same height as in the exterior walls

Build Cheatsheets

HintLightbulb.png Hint: Drawing Dimensioning Workbench is no longer maintained/updated by FreeCAD, though it is still fine to use. The supported workbench is called TechDraw.
FreeCAD Wiki

Protocol: Note that only single objects can be used in dimensional drawings with the Drawing Dimensioning workbench. For complex assemblies, simply collapse into simple copies of compounds - or compound STEP exports (to turn them into simple solids). As such - take master files - take the necessary selection - and turn into one dumb object. Then you can get nice dimensions. Save the file with teh pages included - pages with dimensions show up in another tab, though.


Whole House Views

(moved 1000 sf version to Savannah SH 5)

Exterior Walls

HintLightbulb.png Hint: Use PDF Files, not PNG Thumbnails for module drawings. Verify with crew leader that the drawing is correct before assembling

First Floor Interior

Second Floor Interior

(8' version is at Seed_Home_v2_3D_CAD#Build_Cheatsheets)

First Floor Exterior

Second Floor Exterior - 9' Version

See also - Computer Generated 2nd Floor Exterior Wall Modules by Coderjeff Master files for both 8' and 9' walls with detailed parts - Coderjeff 2nd Floor Exterior.

Plumbing Final

See more at SEH 4 Plumbing - latest work from March 2022 onwards, needs update for 9' walls.

Electrical

See SEH 4 Electrical

Stairs

https://wiki.opensourceecology.org/wiki/Seed_Home_v2_3D_CAD#Technical_Modules

Also - See Stairs

Stairs example.png


Foundation

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Seed_Eco-Home_4_3D_CAD&oldid=307306"