Latest revision as of 21:30, 23 December 2011

Overview

Here are the additional piece parts are required to be fabricated to complete the final assembly.

PART NAME	DESCRIPTION	QTY.
Small Tube	Connects bucket welded assembly to front frame	2
Plate, Motor Mount	Additional mounting plate for motor	1
Shaft	Main spinning shaft	1
Rod, Hinge	Long rod for cover plate hinge	1
Rod, Pin	Pins for locking in the tube between the bucket and front frame at a set distance	2
Top Plate	Large plate to cover the bucket	1
Hinge Pipe	Small pipe used to create hinge between top plate and bucket	8

@@ Line 10: / Line 10: @@
 ! align="center" |'''TYPE'''
 ! align="center" |'''SIZE'''
-! align="center" |'''LENGTH.'''
+! align="center" |'''QTY.'''
+|-
+| Flat||1/2" X 6" x 8"|| align="center"| 1
+|-
+| Flat||1/8" X 48" X 40" || align="center"|1
+|-
+| Tubing||2" X 2" X 0.25"THK x 24"|| align="center"|2
 |-
-| TUBING||2" X 2" X 0.25"THK ||48"
+| Round||ø1.875" x 52"|| align="center"|1
 |-
-| FLAT||0.5" X 6"||8"
+| Round||ø0.5" x 50"|| align="center"|1
 |-
-| ROUND||ø1.875"||52"
+| Round||ø0.5" x 4"|| align="center"|2
 |-
-| ROUND||ø0.5"||58"
+| Pipe||0.5"ID X 0.75"OD x 2"|| align="center"|8
 |}
@@ Line 40: / Line 46: @@
 | [[:file:100541.JPG| Top Plate]] || Large plate to cover the bucket || align="center"|1
 |-
-| {{:file:100540| Hinge Pipe]] || Small pipe used to create hinge between top plate and bucket || align="center"| 8
+| [[:file:100540.JPG| Hinge Pipe]] || Small pipe used to create hinge between top plate and bucket || align="center"| 8
 |}
 =Fabrication and Assembly Instructions=
 # Cut pieces as per piece part drawings.