Rototiller/Manufacturing Instructions/Piece Parts: Difference between revisions
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 10: | Line 10: | ||
! align="center" |'''TYPE''' | ! align="center" |'''TYPE''' | ||
! align="center" |'''SIZE''' | ! align="center" |'''SIZE''' | ||
! align="center" |''' | ! align="center" |'''QTY.''' | ||
|- | |- | ||
| | | Flat||1/2" X 6" x 8"|| align="center"| 1 | ||
|- | |- | ||
| | | Flat||1/8" X 48" X 40" || align="center"|1 | ||
|- | |- | ||
| | | Tubing||2" X 2" X 0.25"THK x 24"|| align="center"|2 | ||
|- | |- | ||
| | | Round||ø1.875" x 52"|| align="center"|1 | ||
|- | |||
| Round||ø0.5" x 50"|| align="center"|1 | |||
|- | |||
| Round||ø0.5" x 4"|| align="center"|2 | |||
|- | |||
| Pipe||0.5"ID X 0.75"OD x 2"|| align="center"|8 | |||
|} | |} | ||
Latest revision as of 21:30, 23 December 2011
| |||||||||||||||||||
Overview
Here are the additional piece parts are required to be fabricated to complete the final assembly.
Tools Required
Materials Required
| TYPE | SIZE | QTY. |
|---|---|---|
| Flat | 1/2" X 6" x 8" | 1 |
| Flat | 1/8" X 48" X 40" | 1 |
| Tubing | 2" X 2" X 0.25"THK x 24" | 2 |
| Round | ø1.875" x 52" | 1 |
| Round | ø0.5" x 50" | 1 |
| Round | ø0.5" x 4" | 2 |
| Pipe | 0.5"ID X 0.75"OD x 2" | 8 |
Parts List and Drawings
| PART NAME | DESCRIPTION | QTY. |
|---|---|---|
| Small Tube | Connects bucket welded assembly to front frame | 2 |
| Plate, Motor Mount | Additional mounting plate for motor | 1 |
| Shaft | Main spinning shaft | 1 |
| Rod, Hinge | Long rod for cover plate hinge | 1 |
| Rod, Pin | Pins for locking in the tube between the bucket and front frame at a set distance | 2 |
| Top Plate | Large plate to cover the bucket | 1 |
| Hinge Pipe | Small pipe used to create hinge between top plate and bucket | 8 |
Fabrication and Assembly Instructions
- Cut pieces as per piece part drawings.