Leo Log: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Sat, May 18, 2013= Working on quick connect tool mount for HydraFabber.") |
Leo Riveron (talk | contribs) No edit summary |
||
| (18 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
=Saturday, August 3, 2013= | |||
Synced up with John.<br> | |||
===TODO:=== | |||
Familiarize myself with John's log and what others are working on with the [[HydraFabber]]. | |||
=Thursday, August 1, 2013= | |||
Updated the [[File:Spindle Mount.skp]] model with appropriate components and groups. | |||
=Saturday, July 27, 2013= | |||
Synced up with John and Marcin. | |||
===TODO:=== | |||
* Take Spindle Mount file and group appropriately<br> | |||
* Right click part > convert to component<br> | |||
* The explosion of the spindle<br> | |||
NOTE: Need to create another mount for the Laser. | |||
=Friday, July 12, 2013= | |||
Made the [[File:Spindle Mount.skp]] model in Sketchup. | |||
=Thursday, July 11, 2013= | |||
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements: | |||
Top hole | |||
* Holds DC Motor with OD = 1.083" | |||
* Flush with the bottom of the Motor | |||
Middle hole | |||
* Holds the top part of the Bronze Bushing with OD = 5/8" | |||
* 1.181" below the Top Hole part | |||
Bottom hole | |||
* Holds the bottom part of the Bronze Bushing (^OD = 5/8") | |||
* 1.102" below the Middle hole part | |||
The center of all 3 holes are .866" from the back of the mount. | |||
The width of the mount is 1.339" (or 39mm). | |||
The width of each piece is .236" (or 6mm). | |||
===TODO: Build model in Sketchup=== | |||
=Sat, July 6, 2013= | |||
Building the spindle mount. | |||
* OD of flexible spider: 5/8" | |||
* OD of bushing: 5/8" | |||
* OD of rigid coupler: 1/2" | |||
* Length of flexible spider: ?? | |||
* Length of bushing: 1 1/2" | |||
* Length of rigid coupler: ?? | |||
===TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs=== | |||
=Sat, June 29, 2013= | |||
Found parts for the [http://mtm.cba.mit.edu/toolheads/spindle/makeit.html Spindle drawing from MIT] | |||
*[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=232047&langId=-1&productId=232047&storeId=10001&ddkey=http:StoreCatalogDrillDownView 20K RPM Motor] | |||
*[http://www.mcmaster.com/#94639a106/=nee3uk Nylon Spacer, 0.25"ODx2.3mmID] | |||
*[http://www.mcmaster.com/#6408k9/=nee4xn Flexible Coupler, 0.25" ID] | |||
*[http://www.mcmaster.com/#6408k61/=nel8jd Flexible Spider] | |||
*[http://www.mcmaster.com/#91124a010/=nel90b Shim Washer, 0.255"ID x 0.005"T] | |||
*[http://www.mcmaster.com/#57155k337/=nee61h Ball Bearing, 0.5"ODx0.25"ID Flanged] | |||
*[http://www.mcmaster.com/#2867t57/=nee5lk Bronze Bushing, 0.625"ODx0.5"IDx1.5"L] | |||
*[http://sdp-si.com/ss/pdf/81003008.PDF Shaft, 0.2497"ODx2.125"L] | |||
*[http://sdp-si.com/ss/pdf/79006079.pdf Shaft Coupler, 0.125" Bore] | |||
===TODO: Build a Sketchup model for the mount using the dimensions from the parts.=== | |||
=Sat, May 18, 2013= | =Sat, May 18, 2013= | ||
Working on quick connect tool mount for [[HydraFabber]]. | Working on quick connect tool mount for [[HydraFabber]]. *Please coordinate between [[John Log]], [[Leo Log]], [[Tim Log]], and [[Nate Log]] - all work related to [[HydraFabber]]. | ||
Latest revision as of 19:13, 3 August 2013
Saturday, August 3, 2013
Synced up with John.
TODO:
Familiarize myself with John's log and what others are working on with the HydraFabber.
Thursday, August 1, 2013
Updated the File:Spindle Mount.skp model with appropriate components and groups.
Saturday, July 27, 2013
Synced up with John and Marcin.
TODO:
- Take Spindle Mount file and group appropriately
- Right click part > convert to component
- The explosion of the spindle
NOTE: Need to create another mount for the Laser.
Friday, July 12, 2013
Made the File:Spindle Mount.skp model in Sketchup.
Thursday, July 11, 2013
Talked with Ilam who pointed me to the Solid Works eDrawings where I opened the models and found all the measurements:
Top hole
- Holds DC Motor with OD = 1.083"
- Flush with the bottom of the Motor
Middle hole
- Holds the top part of the Bronze Bushing with OD = 5/8"
- 1.181" below the Top Hole part
Bottom hole
- Holds the bottom part of the Bronze Bushing (^OD = 5/8")
- 1.102" below the Middle hole part
The center of all 3 holes are .866" from the back of the mount. The width of the mount is 1.339" (or 39mm). The width of each piece is .236" (or 6mm).
TODO: Build model in Sketchup
Sat, July 6, 2013
Building the spindle mount.
- OD of flexible spider: 5/8"
- OD of bushing: 5/8"
- OD of rigid coupler: 1/2"
- Length of flexible spider: ??
- Length of bushing: 1 1/2"
- Length of rigid coupler: ??
TODO: Need to contact Ilan (or McMaster and SDP/SI) to get specs
Sat, June 29, 2013
Found parts for the Spindle drawing from MIT
TODO: Build a Sketchup model for the mount using the dimensions from the parts.
Sat, May 18, 2013
Working on quick connect tool mount for HydraFabber. *Please coordinate between John Log, Leo Log, Tim Log, and Nate Log - all work related to HydraFabber.