Revision as of 07:03, 16 August 2017

Version 3 Working Doc

====Pins from TB6600 to arduino mega for X axis:

All 3 negatives (ENA-, DIR-, PUL-) from TB6000, bridged and connected to GRN on Arduino
ENA+ connected to Pin38
DIR+ to A1
PUL+ to A0

====Pins from TB6600 to arduino mega for Y axis:

All 3 negatives (ENA-, DIR-, PUL-) from TB6000, bridged and connected to GRN on Arduino
ENA+ connected to PinA2
DIR+ to A7
PUL+ to A6

@@ Line 34: / Line 34: @@
 File:CNC_Torch_1708_Motor_interface_module.png|[[File:CNC_Torch_1708_Motor_interface_module.fcstd]]
 File:CNC_Torch_1708_Motor_interface.png|[[File:CNC_Torch_1708_Motor_interface.fcstd]]
+File:CNC_Torch_1in_carriage_module.png|[[File:CNC Torch 1in carriage_module.fcstd]]
+File:CNC_Torch_1in_carriage.png|[[File:CNC Torch 1in carriage.fcstd]]
+File:CNC_Torch_1in_carriage_metal_plate.png|[[File:CNC Torch 1in carriage metal plate.fcstd]]
+File:CNC_Torch_1708_Carriage_interface_small.png|[[File:CNC_Torch_1708_Carriage_interface_small.fcstd]]
+File:Bearing_1in.png|[[File:Bearing_1in.fcstd]]
 File:bolts.png|[[Bolt_socket_*****.fcstd]]
 File:Hex_nut_0.25.png|[[File:Hex_nut_0.25.fcstd]]
 File:Nema_17_stepper_motor.png|[[File:Nema_17_stepper_motor.fcstd]]
 File:GT2 pulley.png|[[File:GT2 pulley.fcstd]]
-File:CNC_Torch_1in_carriage_module.png|[[File:CNC Torch 1in carriage_module.fcstd]]
-File:CNC_Torch_1in_carriage.png|[[File:CNC Torch 1in carriage.fcstd]]
-File:CNC_Torch_1in_carriage_metal_plate.png|[[File:CNC Torch 1in carriage metal plate.fcstd]]
-File:Bearing_1in.png|[[File:Bearing_1in.fcstd]]
 [[File:Rod_1in_Y.fcstd]]
 [[File:Rod_1in_X.fcstd]]