D3D v19.04: Difference between revisions
Jump to navigation
Jump to search
(→Links) |
|||
| Line 2: | Line 2: | ||
*Builds on the [[D3D v19.02]] 3D printer. | *Builds on the [[D3D v19.02]] 3D printer. | ||
==Features== | ==Features== | ||
* | *Eco edition - insulated heatbed for 30%-60% lower energy consumption while printing with heated bed | ||
*Upgraded to 24V control system | |||
*Silent stepper drivers - [[TMC2280]] in legacy mode instead of [[A4998]] | |||
*500W heatbed for 1 minute bed heatup time | |||
*Added built-in GFCI electrical safety breaker as a standard feature | |||
*Still uses the Titan Aero extruder with 3 mm nozzle | |||
==Future Work== | ==Future Work== | ||
Revision as of 17:16, 27 April 2019
Overview
- Builds on the D3D v19.02 3D printer.
Features
- Eco edition - insulated heatbed for 30%-60% lower energy consumption while printing with heated bed
- Upgraded to 24V control system
- Silent stepper drivers - TMC2280 in legacy mode instead of A4998
- 500W heatbed for 1 minute bed heatup time
- Added built-in GFCI electrical safety breaker as a standard feature
- Still uses the Titan Aero extruder with 3 mm nozzle
Future Work
- Dual extruders borrowed from LulzBot TAZ Pro
- Supervolcano Nozzle add-on
- Rubber optimized extruder - see Rubber Extruder