D3D v19.04: Difference between revisions
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
*Eco edition - insulated heatbed for 30%-60% lower energy consumption while printing with heated bed | *Eco edition - insulated heatbed for 30%-60% lower energy consumption while printing with heated bed | ||
*Upgraded to 24V control system | *Upgraded to 24V control system | ||
*Silent stepper drivers - [[TMC2208]] in legacy mode instead of [[ | *Silent stepper drivers - [[TMC2208]] in legacy mode instead of [[A4988]] | ||
*500W heatbed for 1 minute bed heatup time | *500W heatbed for 1 minute bed heatup time | ||
*Added built-in GFCI electrical safety breaker as a standard feature | *Added built-in GFCI electrical safety breaker as a standard feature | ||
Revision as of 17:23, 27 April 2019
Overview
- Builds on the D3D v19.02 3D printer.
Features
- Eco edition - insulated heatbed for 30%-60% lower energy consumption while printing with heated bed
- Upgraded to 24V control system
- Silent stepper drivers - TMC2208 in legacy mode instead of A4988
- 500W heatbed for 1 minute bed heatup time
- Added built-in GFCI electrical safety breaker as a standard feature
- Still uses the Titan Aero extruder with 3 mm nozzle
Future Work
- Dual extruders borrowed from LulzBot TAZ Pro
- Supervolcano Nozzle add-on
- Rubber optimized extruder - see Rubber Extruder