Steam Engine Build/Cylinder Assembly: Difference between revisions
Jump to navigation
Jump to search
(Created page with "{{Category=Steam Engine}} The cylinder assembly consists of the following elements: * Cylinder Case * Cylinder Liner * Cylinder Head with Valve Seats * Cylinder Head with Mount...") |
No edit summary |
||
| Line 7: | Line 7: | ||
* Cylinder Head with Valve Seats | * Cylinder Head with Valve Seats | ||
* Cylinder Head with Mounting Bracket | * Cylinder Head with Mounting Bracket | ||
* Exhaust Plenum | * Exhaust Plenum | ||
Revision as of 02:48, 25 May 2011
Main > Energy > Steam Engine
The cylinder assembly consists of the following elements:
- Cylinder Case
- Cylinder Liner
- Cylinder Head with Valve Seats
- Cylinder Head with Mounting Bracket
- Exhaust Plenum
Create the cylinder assembly as follows:
- Purchase a cylinder liner with a 4" inch bore.
- Fabricate a cylinder case using instructions in Steam Engine Build/Cylinder.
- Fabricate a cylinder head using instructions in Steam Engine Build/Cylinder Valve Seats.
- Fabricate a cylinder head with mounting bracket using instructions in Steam Engine Build/Cylinder End Mount.
- Fabricate a cylinder mounting bracket using instructions in Steam Engine Build/Cylinder Mounting Bracket.
- Fabricate both halves of the exhaust plenum using instructions in Steam Engine Build/Exhaust Plenum.
- Insert the cylinder liner into the cylinder case. Make sure that all holes are aligned properly.
- Attached cylinder head with valve seats to cylinder case with two half-inch bolts using half-inch nuts.
- Attach the exhaust plenum around the cylinder case and secure it with (TBD) bolts.