Rototiller/Manufacturing Instructions/Arm Rest: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:


=Materials Required=
=Materials Required=
{| class="wikitable"
|-
! align="center" |'''TYPE'''
! align="center" |'''SIZE'''
! align="center" |'''QTY.'''
|-
| Square Tubing || 2" x 2" x 0.25"Thick || align="center"|2
|-
| Flat || 0.5" x 2" x 4" || align="center"|2
|}


=Part Fabrication=
=Parts List and Drawings=
{| class="wikitable"
|-
! align="center" |'''ITEM NO.'''
! align="center" |'''PART NAME'''
! align="center" |'''QTY.'''
|-
| align="center" |1 || [[Media:missing.pdf| Small Tube, Arm]] || align="center"|2
|-
| align="center" |2 || [[media:missing.pdf| Plate, Arm Rest]] || align="center"|2
|}


=Assembly=
 
=Fabrication and Assembly Instructions=
{| class="wikitable"
|-
! align="center" |'''Assembly Name'''
! align="center" |'''QTY.'''
|-
| [[Media:missing.pdf| Arm Rest Welded Assembly]] || align="center"|1
|}
 
# Cut piece parts are per drawings
# Weld the plate onto the tube all around using the dimensions shown in the assembly drawing

Revision as of 00:59, 22 December 2011

v · d · ePulverizer Manufacturing Instructions
Prepare
Fabrication and Assembly
Welded Assemblies
Hydraulics
Main Assembly
Finish
Paint  · Test

Overview

Arm Rest Weldment.PNG The arm rests acts as a hard stop that sets the level that the shaft and motor frame assembly can go down to.

Tools Required

Materials Required

TYPE SIZE QTY.
Square Tubing 2" x 2" x 0.25"Thick 2
Flat 0.5" x 2" x 4" 2

Parts List and Drawings

ITEM NO. PART NAME QTY.
1 Small Tube, Arm 2
2 Plate, Arm Rest 2


Fabrication and Assembly Instructions

Assembly Name QTY.
Arm Rest Welded Assembly 1
  1. Cut piece parts are per drawings
  2. Weld the plate onto the tube all around using the dimensions shown in the assembly drawing
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Rototiller/Manufacturing_Instructions/Arm_Rest&oldid=48962"