Rototiller/Manufacturing Instructions/Pivot: Difference between revisions
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|- | |- | ||
|[[file:Pivot_Weldment.PNG|200px]] | |[[file:Pivot_Weldment.PNG|200px]] | ||
|The frame hinge links the bucket to the tool holder frame. | |The frame hinge links the bucket to the tool holder frame. | ||
You will be making two of these as there is both a left and right side that are mirrors of eachother, but use the same sub-components | |||
|} | |} | ||
Revision as of 20:17, 21 December 2011
| |||||||||||||||||||
Overview
|
The frame hinge links the bucket to the tool holder frame.
You will be making two of these as there is both a left and right side that are mirrors of eachother, but use the same sub-components |
Tools Required
Materials Required
| TYPE | SIZE | QTY. |
|---|---|---|
| Flat | 0.75"x4x6 | 2 |
| Square Tubing | 2.5"x2.5" x3/16"Thick | 2 |
| Hex Nut | 0.75"-10 | 2 |
Part Fabrication
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | Joint Plate | 2 |
| 2 | Large Tube | 2 |
| 3 | Steel Hex Nut 0.75"x10 | 2 |