Rototiller/Manufacturing Instructions/Pivot: Difference between revisions
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
! align="center" |'''QTY.''' | ! align="center" |'''QTY.''' | ||
|- | |- | ||
| Flat|| 0.75" | | Flat|| 0.75" x 4 x 6 || align="center"|2 | ||
|- | |- | ||
| Square Tubing|| 2.5" | | Square Tubing|| 2.5" x 2.5" x 3/16"Thick || align="center"|2 | ||
|- | |- | ||
| Hex Nut|| 0.75"-10 || align="center"|2 | | Hex Nut, Steel|| 0.75"-10 || align="center"|2 | ||
|} | |} | ||
Revision as of 20:22, 21 December 2011
| |||||||||||||||||||
Overview
|
The frame hinge links the bucket to the tool holder frame.
You will be making two of these as there is both a left and right side that are mirrors of eachother, but use the same sub-components |
Tools Required
Materials Required
| TYPE | SIZE | QTY. |
|---|---|---|
| Flat | 0.75" x 4 x 6 | 2 |
| Square Tubing | 2.5" x 2.5" x 3/16"Thick | 2 |
| Hex Nut, Steel | 0.75"-10 | 2 |
Part Fabrication
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | Joint Plate | 2 |
| 2 | Large Tube | 2 |
| 3 | Steel Hex Nut 0.75"x10 | 2 |