Rototiller/Manufacturing Instructions/Pivot: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 32: | Line 32: | ||
! align="center" |'''QTY.''' | ! align="center" |'''QTY.''' | ||
|- | |- | ||
| align="center" |1 || [[Media: | | align="center" |1 || [[Media:100516.JPG| Joint Plate]] || align="center"|2 | ||
|- | |- | ||
| align="center" |2 || [[media:missing.pdf| Large Tube]] || align="center"|2 | | align="center" |2 || [[media:missing.pdf| Large Tube]] || align="center"|2 | ||
Revision as of 05:01, 22 December 2011
| |||||||||||||||||||
Overview
|
The frame hinge links the bucket to the tool holder frame.
You will be making two of these as there is both a left and right side that are mirrors of eachother, but use the same sub-components |
Tools Required
Materials Required
| TYPE | SIZE | QTY. |
|---|---|---|
| Flat | 0.75" x 4 x 6 | 2 |
| Square Tubing | 2.5" x 2.5" x 3/16"Thick | 2 |
| Hex Nut, Steel | 0.75"-10 | 2 |
Parts List and Drawings
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | Joint Plate | 2 |
| 2 | Large Tube | 2 |
| 3 | Steel Hex Nut 0.75"x10 | 2 |
Fabrication and Assembly Instructions
| Assembly Name | QTY. |
|---|---|
| Pivot Weldment Left | 1 |
| Pivot Weldment Right | 1 |
- Cut piece parts as per part drawings
- Weld 3/4" nut onto square tubing centered on the 13/16" hole for both square tubings
- Weld square tubing to the Joint Plate as per the welded assembly drawings for the left and right side.