Rototiller/Manufacturing Instructions/Bucket: Difference between revisions
Jump to navigation
Jump to search
| Line 38: | Line 38: | ||
| FLAT||0.75" X 4"||26.5" | | FLAT||0.75" X 4"||26.5" | ||
|- | |- | ||
| Hex Nut, Steel|| 0.75"-10 | | | SQUARE TUBING||2.5" X 2.5" X 0.1875"THK|| 12" | ||
|- | |||
| Hex Nut, Steel|| 0.75"-10 || x2 | |||
|} | |} | ||
Revision as of 08:07, 23 December 2011
| |||||||||||||||||||
Overview
|
The bucket is used to collect the dirt as it is chopped up by the spinning tines. It also contains the features that allow the entire assembly to mount to the tractor.
It is composed of 14 unique parts and 0.75"-10 nuts all welded together. |
Tools Required
Materials Required
| TYPE | SIZE | LENGTH/QTY. |
|---|---|---|
| FLAT | 0.25 X 24 | 80" |
| FLAT | 0.25" X 2" | 1" |
| FLAT | 0.25" X 2.5" | 48.5" |
| FLAT | 0.25" X 5.5" | 48.5" |
| FLAT | 0.375" x 48" | 19" |
| FLAT | 0.5" X 3" | 39" |
| FLAT | 0.5" X 4" | 24" |
| FLAT | 0.5" X 6" | 49" |
| FLAT | 0.75" X 2" | 6" |
| FLAT | 0.75" X 4" | 26.5" |
| SQUARE TUBING | 2.5" X 2.5" X 0.1875"THK | 12" |
| Hex Nut, Steel | 0.75"-10 | x2 |
Parts List and Drawings
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | Blade | 1 |
| 2 | Skid Plate | 2 |
| 3 | Bottom Plate | 1 |
| 4 | Side Plates | 2 |
| 5 | Side Brace Plate | 2 |
| 6 | Hard Stop Plate | 2 |
| 7 | Triangle Plate | 2 |
| 8 | Cross support plate | 1 |
| 9 | Cross support Plate Lower | 1 |
| 10 | Rear Mounting Plate | 1 |
| 11 | Back Plate | 1 |
| 12 | Bottom Mounting Plates | 2 |
| 13 | Large Tube | 2 |
| 14 | Hex Nut, 0.75"-10, Steel | 4 |
Fabrication and Assembly Instructions
| Assembly Name | QTY. |
|---|---|
| 1 2 Bucket Welded Assembly | 1 |
