D3D v18.12

Introduction

• v18.12 is same as v18.10 in 3D Printer Genealogy except that we used a modified Lulzbot Mini omnidirectional fan shroud for print cooling

Build at Highland Community College

• Feb 11, 2019
• Used 13" frame with 1" symmetric extension consisting of half idler pieces under the Universal Axis
• Titan Aero 3mm extruder, using 1.75 mm filament without problem
• Y axis pretested with 300 mm/sec motion

Extruder CAD

• 

  Underslung Extruder Base without fan and shroud - [1]. With fan and shroud - [2]. Ready for printing - [3]

• 

  Stock Titan Aero mount bracket. See [4]. Bracket - [5] - STEP + STL. Check out drawings from E3D - [6]. STEP of Bracket - File:Bracket.fcstd

• 

  Titan Aero with motor - [7]

• 

  Titan Aero mount top plate. File:Brackettop.fcstd.

• 

  Simplified carriage: File:Universal axis carriage side.fcstd. (From D3D Part Library)

• 

  Sensor holder. Print at 100%. File:Sensholder.fcstd. File:Sensholder.stl.

• 

  Lulzbot Mini 2 OSE Mod Fan Shroud. File:Lulzbotmini2shroud.fcstd. Original source file with sketches from Lulzbot- [8]. STL - File:Fanshroud.stl.

• 

  Lulzbot Mini 2 Extruder [9].

CAD of Parts

D3D_Part_Library#D3D_16.22

Manual

See 3D Printer Manual

Code

• Lulzbot Cura settings file - File:D3D 14inchframe Titan Aero Omni Shroud 04 175.ini
• Use File:Marlin v1810.zip - works as is

Links

• 3D Printer Genealogy