File:Angleconnector.fcstd: Difference between revisions

Revision as of 17:15, 11 February 2020

Starting with sketches around a nut.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	03:34, 12 February 2020	(413 KB)	Jeremyd (talk \| contribs)	Fillet interior corners where radius in angle iron joins
	22:06, 11 February 2020	(156 KB)	Jeremyd (talk \| contribs)	Reverted to version as of 22:39, 30 October 2019 (UTC)
	17:15, 11 February 2020	(148 KB)	Jeremyd (talk \| contribs)	Fillet on inside angle iron channels to allow better fit of standard 1.5" angle iron, where the inside corner has a slight radius.
	22:39, 30 October 2019	(156 KB)	Marcin (talk \| contribs)	Now it's fixed for full editability,
	04:22, 30 October 2019	(145 KB)	Marcin (talk \| contribs)	Fixed for editability by splitting into parts. See FreeCAD Workarounds
	18:04, 5 October 2019	(73 KB)	Marcin (talk \| contribs)	Filleted compound copied to a new document. More filleting doesn't work.
	17:59, 5 October 2019	(74 KB)	Marcin (talk \| contribs)	Filleted on one side.
	17:55, 5 October 2019	(40 KB)	Marcin (talk \| contribs)	Compound - just one object made by copying and pasting a compound into a new document.
	17:48, 5 October 2019	(46 KB)	Marcin (talk \| contribs)	Removed sketches.
	20:31, 4 October 2019	(46 KB)	Marcin (talk \| contribs)	Removed sketches.

You cannot overwrite this file.

The following 5 pages use this file: