Eric's Data Buffer Page

Basics

• A Page where User:Eric dumps links pre "putting them in the right place"
• A more orderly, open, and non "500 deep bookmark" method
• Also acts as a public form of Bookmarks/tabs, so that even pre-being posted in a site, others can see the information and even iterate/be inspired by it, rather than have it "sit on a shelf"
• Should be promptly emptied

Misc Good Products

• EcoTank ET-3830 Wireless Color All-in-One Cartridge-Free Supertank Printer with Scan, Copy, Auto 2-sided Printing and Ethernet
  • One of those printers with a vat, rather than cartridge system, makes it much less of a Monopoly, so cheaper, and also may allow for using your own Open Source Ink and/or doing crazy stuff like Bio-Printing or PBJ Printing
• Keurig K-Duo Plus Coffee Maker, Single Serve and 12-Cup Carafe Drip Coffee Brewer, Compatible with K-Cup Pods and Ground Coffee, Black
  • Can use single service pods (preferably the diy refillable ones, and not the Plastic Waste Generating Nightmare Ones...), or full coffee filters for a full pot
  • Also the water container is removable so you can just hold it under the sink or refrigerator water dispenser and be done
  • Bit pricy, but it is built like a tank and get it on a sale at some local place probably
    • {{{Or just Reverse Engineer and Make the Ultimate Open Source Drip Coffee Maker (Let alone the Open Source Super-Automatic Espresso Machine ...}}}
  • Main downside is it doesn't have a separate Hot Water Spout, so anything other than coffee (tea, or running it empty for hot water) has a weak coffee taste added to it
    • {{{Again all the more reason to hack one and/or reverse engineer one!}}}
• Any of the Shark Lift-Away Vacuums
  • Very modular; you can ditch the handle and base if you are just walking around Vacuum Dusting etc
  • Now if only i could have a Ryobi 40v Battery slot onto it!

From Eric Lotze Log

Temporary "Interesting Link That I Will Find/Make Pages For" Area

• https://www.fabbaloo.com/blog/2017/11/30/mits-laser-powered-3d-printer-is-this-the-speed-weve-been-waiting-for
• https://en.wikipedia.org/wiki/Bathtub_curve
• https://www.sciencedirect.com/science/article/abs/pii/S0016236109005250
• https://www.ldxsolutions.com/activated-carbon-injection-aci-system/
• https://www.eia.gov/todayinenergy/detail.php?id=5430
• https://www.pfpi.net/air-pollution-2
• https://www.frontiersin.org/articles/10.3389/fnbeh.2020.00116/full
• https://us.hikvision.com/en/blog/hikvision-launches-open-source-smart-cameras-intel-x86-processor-offers-integrated-camera-pc-lens-and-light-source
• https://photobite.uk/features/interview-ponf-25mp-open-source-camera-system/
• https://photofocusblog.wordpress.com/2014/08/10/the-emerging-open-source-camera/
• This video on biofuel tax credit fraud
  • Mentioned this form Form 8864 and all sorts of odd related terms
    • "liquid fuel derived from biomass"
    • "agri-biodiesel mixtures"
    • "biodiesel mixtures"
    • "renewable diesel mixtures"
  • Emerging Renewable Hydrocarbon Biofuels
• https://openvisualfx.com/software/
• http://fab.cba.mit.edu/classes/862.16/people/sam.calisch/project/index.html
• https://worldpermacultureassociation.com/swales-or-not-to-swale/ (swale stuff 1)
• https://worldpermacultureassociation.com/swales-in-action/ (swale stuff 2)
• A Cornell University School of Civil and Environmental Engineering Presentation on Water Treatment by Monroe L. Weber-Shirk (seems to be surface water-drinkable water, not wastewater treatment)
• A 2017 Study Titled "Fenton treatment for flotation separation of polyvinyl chloride from plastic mixtures"
• No idea where to put it, but Thomas Sanladerer in one episode of The Meltzone Podcast was describing a bike helmet as a Semi-Sandwich Composite/Structure (forget the wording), Foamed Foam + Rigid Plastic, when discussing a 3D Printed Bike Helmet (sandwich composites are neat, so that term may be relevant sometime)
• https://en.wikipedia.org/wiki/Orangeburg_pipe
  • Need to see if this was carcinogenic/prone to leaching etc, also could maybe be applied to modern plastics, but same methods?
• Ted Talks to Put Somewhere:
  • https://www.ted.com/talks/charles_leadbeater_the_era_of_open_innovation#t-26357
  • https://www.ted.com/talks/matt_ridley_when_ideas_have_sex#t-959410
  • https://www.ted.com/talks/yochai_benkler_the_new_open_source_economics#t-2462
• https://modelviewculture.com/pieces/tripping-over-our-bootstraps-open-source-ecology-and-the-promise-of-liberational-technology (A good article shared by Wesxdz on the OSE Discord Server , constructive criticism of OSE, see around this area when documenting discussion on it (i made a list of what *i* at least gathered as it's main points, but would love to hear more takes
• Chorleywood bread process
  • https://bakerpedia.com/processes/chorleywood-baking-process/
  • https://bakerpedia.com/ingredients/dough-conditioner-ingredients/
• https://www.mdpi.com/2076-3417/11/7/3093/htm - Strategies for Reducing Sodium Intake in Bakery Products, a Review
• A 2018 Paper Titled " Spouted Bed and Jet Impingement Fluidization in Food Industry
• A 2022 Paper Titled "Conceptual design and performance analysis of water electrolysis propulsion system with catalytic igniter for CubeSats"

Environmental Stuff to Cover Elsewhere/Look Into

• https://publicintegrity.org/environment/the-exxonmobil-near-disaster-you-probably-havent-heard-of/
• https://www.vice.com/en/article/epnagz/coal-ash-florida-barge-capsize-aes-puerto-rico

List

8/21/2023

• Misc Metal (Casting) Related Pages from when i modified that Zinc-Aluminum Alloy page
  • https://www.hillandgriffith.com/core-binders core binders - Hill & Griffith
  • https://eckindustries.com/news/how-are-casting-economics-and-welding-related eck industries "How are casting economics and welding related?"
  • Sand Muller (May be a need for another Open Source Tool, although OTS Flour Sifters on amazon have me intruiged
  • https://www.researchgate.net/publication/254255816_Improving_casting_performance_through_customized_insulating_shapes_and_advanced_simulation_techniques Improving casting performance through customized insulating shapes and advanced simulation techniques
  • https://www.ha-international.com/about_us/article_8.aspx ? (Dead Link? Was in the pile though, leaving it here)
  • https://www.foundrymag.com/molds-cores/article/21928354/for-investment-casting-an-efficient-effective-and-environmentally-sound-insulator Foundry Management and Technology - For Investment Casting, an Efficient, Effective and Environmentally Sound Insulator
    • One Source for all the AES Wool / AES Insulation / Alkaline Earth Silicate stuff (alternative to Asbestos and Refractory Ceramic Fiber (RCF) for high temperature insulation)
  • https://www.researchgate.net/publication/276079433_Thermo-Insulating_Moulding_Sand_for_thin_Walled_Castings Thermo-Insulating Moulding Sand for thin Walled Castings
• https://www.usenergyproducts.com/collections/super-shield-radiant-barrier-1

11/13/2022

• https://wiki.polymerservice-merseburg.de/index.php/Vernetzung_Elastomere German Website Going Over Polymer Crosslinking
• A Video by the YouTube Channel "MTC View" Titled "Machine planting Longleaf pine seedlings Jan 7, 2011" ( ~5 Minute Watch )
  • Showcases Mechanized Tree Planting
• Pilot Line vs Production Line
• Butenediol Vinyl Alcohol Co-Polymer / BVOH (Plastic)
• Furfuryl alcohol
• ESP32 / ESP32 Malware
• CNC Microwave Duplexer Tuner:
  • The Project's OpenBuilds Page
  • Explanation of Duplexers
  • I have a YouTube Playlist on it If I remember correctly (they have build and demo videos)
• Barasol-R Cellulose Based Thickener for Drilling Mud (Can it replace Bentonite Clay ?) (Heard about in a DIY Well Drilling Rig video a while back)
• How to Distinguish Chain Link Fence from Hexagonal Wire Mesh
• Eco 6-10 Balance Charger
• OSR / Plastic Hub stuff
• Modular Open Systems Approach (MOSA)
• "A Brief comparison between mil std 1553 and major commercial data bus systems"
  • This was in regards to me looking into CAN Bus , ethernet, etc for that OS Automotive Sensor / Screen / HUD type thing i am planning a bit
• A Video by the YouTube Channel "maker.moekoe" Titled "ESP32-S2 based universal reflow oven controller | assembly & tests | makermoekoe"
  • And Reflow Ovens / Reflow Soldering in general
  • Also update that PCB Workflow page
• Thingiverse Page by User "JKSniper" Titled "Universal 3D Printer Smart Enclosure - (Backup/Duplicate)"
• PolyMide™ CoPA
• Bela.io
• Equipment World - How to set up and maintain on-site fuel tanks
• Fuel Shelf Life
• World Ocean Conservancy - Building a Clean Swell (App/Internet for Organizing Marine Debris / Riverbank/Beach Litter Collection)
• Free-Space Optical Communication / LiFi / Infrared Data Association / Visible Light Communication
  • Was looking into LiFi for that smartphone, also encountered that old smartphones had infrared data (+ can use phone as (smart) remote)
  • Found other applications + data to document
• FLIRC USB Universal Remote Control Receiver - 23 USD (Can it only receive or can it send too?)
• Chocolate Production Stuff (Typical me going off the rails, but this was back with my environmental science class and that NTFP project
• Found the CraftChocolateTV (YouTube Channel) Link which covers everything in amazing detail
• Some other channels (Including NileRed now too i guess) have covered it at the sort of snobby DIY level, but CraftChocolateTV actually covered proper commercial scale stuff and had great info
• Planet Simulator Lab (Canada) More relevant to that SciHub discord than here, dumping it here for now - Wikipedia Page
• Fractional Freezing / Winterization of Oil to improve cold weather tolerance
• Iowa State University Extension Office - Methods for Rapid Moisture Analysis (Relevant to Grain and Biomass) (Heard about the device in a SmarterEveryDay (YouTube Channel) Video titled Everything About Grain Bins (Farmers are Geniuses) - Smarter Every Day 218
• Another thing from the Enviro Sci class: Pest Counting:
  • settings Open AccessArticle A Vision-Based Counting and Recognition System for Flying Insects in Intelligent Agriculture 2018
  • Was thinking for Integrated Pest Management data gathering, but also for a selective Bug Zapper (Cheap effectiveness of those etc minus the ecosystem destruction)

11/5/2022

• I found this a while back, but don't have enough content (or understanding for that matter!) to make a page on it, so i'll leave it here for now:
  • Mixed Conducting Membranes (Seems almost like a PEM but for ions, typically Oxygen, so one can make an Oxy-Fuel Combustion based power plant without needing an Atmosphere Separation Unit ?
    • Links on this Topic:
      • NETL "9.1.1. CARBON DIOXIDE CAPTURE APPROACHES"
      • 7.3.1. "CO-PRODUCING H2 WITH CURRENT IGCC TECHNOLOGY"
        • I encountered the terms "Ion Transport Membranes" and "Ceramic Autothermal Reactor" in this diagram under "Oxygen Supply" which lead to me looking into this
      • Encyclopedia of Membranes - Mixed Conducting Membranes
      • "Process Design Characteristics of Syngas (CO/H2) Separation Using Composite Membrane"
      • "Novel cycles for power generation with CO2 capture using OMCM technology"
      • "Mixed ionic-electronic conducting (MIEC) membranes for thermochemical reduction of CO2: A review"
      • "Development of a Novel Oxygen Supply Process and its Integration with an Oxy-Fuel Coal-Fired Boiler"
      • "Roadmap for Sustainable Mixed Ionic-Electronic Conducting Membranes"
      • Calcium titanate was connected somehow, might have been a related mineral compared to Natural vs Synthetic Zeolite
• This is along the lines of Dilbit / Synbit / Fuel Oil , but this is a study i found a while back and documenting here. I came across it when looking into Fuel Storage / Fuel Settling etc:
  • A 2022 Study Titled "Comparative Study of Light Cycle Oil and Naphthalene as an Adequate Additive to Improve the Stability of Marine Fuels"
• Some Stuff on Surface Treatment :
  • I was originally looking into Diamond Like Carbon (and/or full on Monocrystaline Chemical Vapor Deposition formed diamond) due to the high heat conductivity, low friction, and high strength (although ability to be scratched =/= ability to be shattered/fractured i'd assume, so i'm intrigued about that
  • Either way in looking up that i came across this video ( "Why Do NASCAR Teams Use This Technology? | Calico DLC Coatings [TECH TALK" by "High Performance Academy" ] ~14 Minute Watch) where someone was discussing it's Automotive Applications
    • In the comments, someone mentioned:
      • "WPC and Deep Cryogenic Processing. You DCT first then WPC.. and applying Ceramic Coatings and Thermal dispersants to the correct areas does some amazing things"
  • WPC was some sort of super secret Shot Peening but with powder, as per This Motor Trend Article, "Shot Peening & WPC Treatment - Special Treatment, Part 1 - Tech"
• In terms of Deep Cryogenic Treatment (DCT), i found these articles posted on Thermal Processing Magazine's Website:
  • Deep Cryogenic Treatment - By Frederick J. (Rick) Diekman -April 5, 2013 - DCT is a very important process to the gear making industry. If done correctly, it can increase product durability and reduce tooling costs.
  • Take Another Look at Deep Cryogenic Treatment - By Frederick Diekman -January 15, 2020 - Research being done on this process is showing that it can be advantageous to creating longer-lasting products and tools that cost less.
• High-frequency impact treatment was a needlegun / tatoo gun like alternative to "Peening" with a Chipping Hammer used for Weld Treatment post-weld in the field that may be worth a look
  • I did remember when Welding Cast Iron you had to Peen it with the chipping hammer to prevent cracking, supposedly a very difficult to weld material nonetheless

4/29/2020

• Started out on looking for fine tip pens for plotter (~0.03mm seemed to be the finest non-ball/fountain pen)
• Led to microfluidics...
• Electronic fountain pen - a highly integrated stand-alone microdosage system
• Pneumatic drop generator: Liquid pinch-off and velocity of single droplets
• The recent development and applications of fluidic channels by 3D printing.
• Plug-in nanoliter pneumatic liquid dispenser with nozzle design flexibility.
• 3D printing for chemical, pharmaceutical and biological applications
• Open-source, community-driven microfluidics with Metafluidics
• Search for Per-Droplet OTS Inkjet Droplet Size
• An on-chip imaging droplet-sorting system: a real-time shape recognition method to screen target cells in droplets with single cell resolution
• A Paper on how to hack an inkjet

5/1/2020

• A Paper Titled "A Novel Oil Secretion Mechanism for Cost-Effective Algal Biofuel Production" Essentially genetically modifying oil producing algae to make press/solvent extraction not needed, an oil-water seperator, and filters is all that is needed
• https://www.bloomenergy.com/ Bloom Energy] CNG-air fuel cells

Internal Links

• User:Eric
• Trashcan