Rototiller/Manufacturing Instructions/Shaft and Motor Frame: Difference between revisions
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
! align="center" |'''TYPE''' | ! align="center" |'''TYPE''' | ||
! align="center" |'''SIZE''' | ! align="center" |'''SIZE''' | ||
! align="center" |'''QTY.''' | ! align="center" |'''LENGTH/QTY.''' | ||
|- | |- | ||
| Flat|| 0.5" x 2 | | Flat|| 0.5" x 2" || align="center"|8.5" | ||
|- | |- | ||
| Flat|| 0.5 x 8 | | Flat|| 0.5" x 8" || align="center"|36" | ||
|- | |- | ||
| Rectangular Tubing|| 2" x 4" x 1/4"Thick || align="center"| | | Rectangular Tubing|| 2" x 4" x 1/4"Thick || align="center"|56" | ||
|} | |} | ||
Revision as of 07:43, 23 December 2011
| |||||||||||||||||||
Overview
|
The shaft and motor frame supports the main shaft with the tines and provides a mounting location for the motor. |
Tools Required
Materials Required
| TYPE | SIZE | LENGTH/QTY. |
|---|---|---|
| Flat | 0.5" x 2" | 8.5" |
| Flat | 0.5" x 8" | 36" |
| Rectangular Tubing | 2" x 4" x 1/4"Thick | 56" |
Parts List and Drawings
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | Cross Tube | 1 |
| 2 | End Plate, Cross Tube | 2 |
| 3 | Plate, Motor End | 1 |
| 4 | Plate, Bearing | 2 |
Fabrication and Assembly Instructions
| Assembly Name | QTY. |
|---|---|
| Front Holder Welded Assembly | 1 |
- Cut piece parts as per part drawings
- Weld end plates onto rectangular cross tube
- Weld motor end plate and two bearing plates as per assembly drawing. Ensure each is welded strongly all around and that they are all parallel to each other