CEB Press/Manufacturing Instructions

From Open Source Ecology
< CEB Press
Revision as of 06:24, 16 August 2011 by Ryan Lutz (talk | contribs)
Jump to navigation Jump to search

Under construction icon.png This page is currently under construction and might undergo drastic changes within a short span of time.


CEB Press
   Home  |  Research & Development  |  Bill of Materials  |  Manufacturing Instructions  |  User's Manual  |  User Reviews    CEB Press.png


Parts Fabrication

  1. Arms - primary
  2. Arms - secondary
  3. Feet
  4. Frame with main cylinder
  5. Grate mounts
  6. Hopper sheet metal
  7. Hopper mounting plate
  8. Hopper supports
  9. Hoses - Secondary cylinder hose unit
  10. Hoses - Shaker and main cylinder
  11. Hoses - Main hose unit
  12. Legs
  13. Roller guides
  14. Secondary cylinder
  15. Secondary cylinder sensor unit
  16. Sensor - Main cylinder
  17. Sensor - Secondary cylinder
  18. Sensor - Soil
  19. Soil grate
  20. Soil loading drawer
  21. Soil Shaker motor unit
  22. Soil Shaker


Manual

Automatic

Assembly

Final Assembly and Job Site Setup


Programming

An Arduino is the microprocessor that controls the CEB Press's actions. It must be programmed with the CEB Press's unique program for making bricks.

Source code can be found at github: https://github.com/OSE/ceb-controller

Old code:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions&oldid=36169"