Rototiller/Manufacturing Instructions/Piece Parts
Jump to navigation
Jump to search
| |||||||||||||||||||
Overview
Here are the additional piece parts are required to be fabricated to complete the final assembly.
Tools Required
Materials Required
| TYPE | SIZE | LENGTH. |
|---|---|---|
| TUBING | 2" X 2" X 0.25"THK | 48" |
| FLAT | 0.5" X 6" | 8" |
| ROUND | ø1.875" | 52" |
| ROUND | ø0.5" | 58" |
Parts List and Drawings
| PART NAME | DESCRIPTION | QTY. |
|---|---|---|
| Small Tube | Connects bucket welded assembly to front frame | 2 |
| Plate, Motor Mount | Additional mounting plate for motor | 1 |
| Shaft | Main spinning shaft | 1 |
| Rod, Hinge | Long rod for cover plate hinge | 1 |
| Rod, Pin | Pins for locking in the tube between the bucket and front frame at a set distance | 2 |
| Top Plate | Large plate to cover the bucket | 1 |
| Hinge Pipe]] | Small pipe used to create hinge between top plate and bucket | 8 |
Fabrication and Assembly Instructions
- Cut pieces as per piece part drawings.