Rototiller/Manufacturing Instructions/Pivot
Jump to navigation
Jump to search
| |||||||||||||||||||
Overview
|
The frame hinge links the bucket to the tool holder frame.
You will be making two of these as there is both a left and right side that are mirrors of eachother, but use the same sub-components |
Tools Required
Materials Required
| TYPE | SIZE | QTY. |
|---|---|---|
| Flat | 0.75" x 4" x 6" | 2 |
| Square Tubing | 2.5" x 2.5" x 3/16"Thick x 12" | 2 |
| Hex Nut, Steel | 0.75"-10 | 2 |
Parts List and Drawings
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | Joint Plate | 2 |
| 2 | Large Tube | 2 |
| 3 | Steel Hex Nut 0.75"x10 | 2 |
Fabrication and Assembly Instructions
| Assembly Name | QTY. |
|---|---|
| Pivot Weldment Left | 1 |
| Pivot Weldment Right | 1 |
- Cut piece parts as per part drawings
- Weld 3/4" nut onto square tubing centered on the 13/16" hole for both square tubings
- Weld square tubing to the Joint Plate as per the welded assembly drawings for the left and right side.