Rototiller/Manufacturing Instructions/Arm Rest
Jump to navigation
Jump to search
| |||||||||||||||||||
Overview
|
The arm rests acts as a hard stop that sets the level that the shaft and motor frame assembly can go down to. |
Tools Required
Materials Required
| TYPE | SIZE | QTY. |
|---|---|---|
| Square Tubing | 2" x 2" x 0.25"Thick x 13.5" | 2 |
| Flat | 0.5" x 2" x 4" | 2 |
Parts List and Drawings
| ITEM NO. | PART NAME | QTY. |
|---|---|---|
| 1 | Small Tube, Arm | 2 |
| 2 | Plate, Arm Rest | 2 |
Fabrication and Assembly Instructions
| Assembly Name | QTY. |
|---|---|
| Arm Rest Welded Assembly | 2 |
- Cut piece parts are per drawings
- Weld the plate onto the tube all around using the dimensions shown in the assembly drawing